Volumetric paper lanterns for the New Year. DIY Christmas lanterns

A flat lantern that can be hung on a Christmas tree or on a wall couldn’t be easier to make. For this:

1. Cut strips from multicolored paper or postcards. Their width is the same (2 or 3 cm), but their length is different. You will get: 1 short strip; several pairs of ribbons, each of which is 1-2 cm longer than the previous ones.
2. Lay out the strips: in the center - the shortest; to the right and left of it, symmetrically, there are paired stripes, the length of which increases towards the edges.
3. Align all the ribbons on one side and staple or glue them together.
4. In the same way, trim the edges of the strips on the other side and fasten them together.
5. Attach thread or ribbon.

An easy option - volumetric flashlight:

1. A sheet of paper is folded lengthwise.
2. From the fold side, scissors make equal cuts at random intervals, leaving the last 1.5-2 cm of paper untouched.
3. Unfold the sheet, fold it into a cylinder shape (widthwise) and glue it together.
4. Cut a strip of paper and glue it on top to make a handle.

Advice. Such a flashlight can be supplemented with a “filling”: wrap it around a paper cylinder. And if you place a glass glass with a candle inside, you will get a real mini-lamp.

Space for creativity. Interesting paper lanterns

To make a flashlight in the form of a fluffy Christmas tree , follows:

1. Prepare a cylinder - you can glue it together from cardboard or take a paper roll or a metal can for this purpose.
2. Cover the workpiece with white paper.
3. In turn, stick strips 7-10 cm wide onto the cylinder, each one slightly higher than the previous one, to the very top.
4. As you glue the strips, make cuts along their entire width to create a fringe.
5. Attach a handle.

For the manufacture of round lantern need to:

1. Cut 14-16 identical strips.
2. Fold them, poke holes in both ends of the stack with an awl, stepping back 3-4 mm from the edge.
3. Fasten the stack of strips in any way: insert rivets into the holes (available in craft stores) or thread a thread through both ends. The thread must be pulled so that the stack of strips bends in an arc, and secured in the area of ​​the holes with tape or glue.
4. Spread all the ribbons in a circle, starting from the bottom, to form a ball.
5. Attach a loop.

Advice. The bottom of such a lantern can be decorated with a tassel made of thread, beads or cut paper.

Simple New Year's lanterns made of paper: video

Option 1.

The easiest way to make a New Year's paper lantern is as follows.

Cut colored paper or old postcards into strips of the same width (for example, 2 cm), but different lengths. You should get one central shortest strip, the remaining strips should be in pairs, each pair a few centimeters longer than the previous one.

Place the strips together in the correct order, aligning them at one end, and then secure them with a stapler or glue. After this, align the strips at the opposite end and also fasten them with a stapler or glue. The flashlight is ready!

Option 2.

One of the most popular Christmas decorations is New Year's lanterns. They are very easy to make, and thanks to spectacular form lanterns will become a real decoration of the New Year tree.

Sheet of colored paper rectangular shape fold in half lengthwise. From the fold line we make parallel cuts at an equal distance from each other (the cuts should end 2 centimeters short of the edges of the sheet). Unfold the sheet of paper and roll it into a tube, gluing the ends of the sheet together. Now, at the same time, we squeeze this tube a little from below and from above - we get a flashlight.

But that is not all. You can make a core for a flashlight. To do this, we glue a tube from thicker paper, but with a smaller diameter. We connect the two parts together (we place the core inside the flashlight) using glue or a stapler. The flashlight is ready.

Paper lanterns can be used in a variety of ways. And just like Christmas decorations. And as a design for a small vase or glass (only in this case there is no need to make a “core” for a flashlight). And several New Year's lanterns suspended on a ribbon or serpentine will turn into a multi-colored garland.

You can insert a candle inside the New Year's lantern. It is better to use safe LED candles. If you are using a regular candle, be sure to place it in a glass cup for safety reasons.

Option 3.

A cardboard box of juice or milk is a wonderful material for making a New Year's lantern. The easiest way to make this New Year's toy with your own hands is as follows:

1. Take a juice or milk box, cut off the bottom, and cover it with white paper.
2. Make a New Year's themed applique on both sides of the package.
3. Now the adult must make holes with an awl along the contour of the drawing. If you place such a box on a flashlight or LED candle, the design will glow in the dark.

Attention! If you are using a regular candle, be sure to place it in a glass cup for safety reasons.

like this New Year's craft you can also make it yourself from a regular paper bag

Holes in a paper lantern can be made not only round, but also, for example, in the shape of hearts or stars, as in the photo below.

Option 4.

Home is a symbol of comfort, warmth, family hearth. That's why on frosty, winter days a New Year's lantern in the form paper house will look most appropriate.

Option 5.

A New Year's lantern can be made not only in the shape of a house. You can just make it homemade cardboard box make holes and seal them with parchment. The lantern will be decorated with a New Year's applique.

To make these wonderful New Year's lanterns, you will need to cut colored paper into strips of the same length and width. The length and width of the strips depends on the size of the lantern you want to make. To make one paper lantern you will need an average of 14-16 strips of paper.

Stack the paper strips together and use an awl to make a hole at one end and the other. Pass the thread through one of the holes, secure the end of the thread with tape, glue or a sticker.

Thread the thread through the second hole.

Pull the thread so that the strips of paper bend. Tie the thread in a knot. The knot should be large enough so that it cannot slip through the holes in the paper strips.

Flatten the strips to form a ball shape. The flashlight is ready. All that was left was to find a place to hang it.

We invite you and your child to make an original paper lantern in the shape of a bird in a cage. To make this Christmas decorations you will need:

Colored paper and cardboard
- awl
- scissors
- double-sided tape or glue
- plastic cover

Work plan:

a. Cut colored paper into strips of the same length and width (for example, 1.5 cm - width, 30 cm - length). To make one lantern you will need 4 strips of paper.

b. Use an awl to make a small hole in the center of each strip.

d. Pass a thread through it, tie the end of the thread with a knot. Make a second knot about 4 cm from the bird.

e. Now you need to thread the paper strips onto the thread. Slide the strips along the thread to the top knot.

f. Above paper strips tie another knot, on which you can put a bead for beauty.

g. Now take plastic cover and place double-sided tape around it.

H,i,j. Spread the strips apart and symmetrically attach their ends to the lid.

Ice lanterns

In China, paper lanterns are made special function– protect the home from an evil spirit. We use them for decoration during New Year's holidays. We invite you to learn how to make paper lanterns with your own hands for the New Year. Below in the article are several step-by-step photo lessons and videos that show you how to make such beauty!

Traditional lanterns for beginners

Quite simple and spectacular decoration, which you can make with your own hands together with your children. Such paper lanterns you can decorate an office, a classroom at school, a group in a kindergarten and a room in the house.

Let's look at how to make paper lanterns step by step with photos for beginner handicraftsmen. The following is a detailed master class.

Such creativity will be interesting for children, so you can involve them in this simple and interesting work. Joint activity creates a special festive atmosphere for children and adults.

We will need:

• colored paper any shades;
• scissors;
• PVA glue or regular stationery glue for paper;

Let's start creating:

1. You need to fold a piece of paper in half lengthwise and make cuts on the fold side every 1 - 1.5 centimeters.
2. We unfold the paper and fold it crosswise into a circle, gluing the joint at the top and bottom.
3. Cut a strip from a colored sheet of paper and glue on a handle. The flashlight is ready, but variations are possible here.

You can leave the lantern like this for the New Year 2018, or glue a cylinder from another sheet of colored paper (you can use the same shade or take a different one) and insert it inside, gluing the cut sheet around this cylinder.

Paper lantern diagram

Make a few of these simple and bright ones. paper products and hang them on a thread to resemble a garland, or decorate a Christmas tree with them.

Ball-shaped lanterns 2 options

The first option is a ball of stripes. To implement it we need:

1. Any colored paper or cardboard. You can use old postcards.
2. Rivets or thread with a needle and a couple of beads.
3. Rope for loop.
4. Scissors.
5. Awl.

PHOTO: Round New Year's paper lanterns

We do this:

1. We cut strips, the width of which is 1.5 centimeters, and the length - 15 - 18 centimeters, as desired.
2. We stack the strips together and make a hole on both sides with an awl.
3. We insert rivets or a bead strung on a thread and a needle into the hole.
4. We spread the strips around the circumference.
5. We attach a loop on one side.

Step by step

The toy is ready.

You can decorate with such stylish lanterns Christmas tree or room.

Another round option

For the second version of paper lanterns in the shape of a ball, which you can make with your own hands for the New Year, a diagram describing the manufacturing process is provided.

Round flashlight

Let's prepare everything you need:

• thick colored paper, cardboard or the same old postcards.
• hooks or straightened paper clips for loops. You can also use a textile loop from thin ribbons, jute rope, braid.
• satin ribbon.
• glue.

Step by step photos

These toys are easy to make:

1. Cut out circles of the same diameter from colored cardboard or paper. For one flashlight you need 10 such circles.
2. Fold each circle in half with the colored side facing inward.
3. Glue all the circles together, leaving the last 2 sides unglued.
4. Glue in a hook or loop of braid and glue the remaining sides together.
5. Decorating the toy beautiful bow from ribbon or attach any other decor to it to your liking.

But these are not all the options for this interesting and familiar New Year's toy from childhood. Let's look at a few more ideas further.

See how to make lanterns for the New Year 2018 with your own hands using photos and diagrams:

Figured paper lanterns

You can make your own shaped paper lanterns for the New Year, a description of which with a diagram is given below. The process of creating such New Year's miracle very similar to the previous description.

Curly

How to make them step by step

First, let's prepare everything that will be useful in the work:

Thick paper, cardboard or, our favorite, old postcards.

• glue;
• double sided tape;
• scissors;
• needle and thread;
• tape, 0.5 centimeters wide;
• decorative elements: berries, beads.

Now let’s get started; during the work you need to be careful and attentive. It is important to do everything according to the sequence and not miss the details:

1. We make a figured stencil of one side of the flashlight and cut out several identical parts. For one decoration, make 10 - 20 pieces as desired.
2. Fold the pieces exactly in half.
3. Now the most crucial moment is gluing. You need to do this according to the picture at the right points. First in those marked “1”, then in those marked “2”.
4. Now connect the edges of the ovals and sew with thread. Can be glued with double-sided tape.
5. Now unfold the flashlight and secure its edges.
6. Attach a loop of ribbon and decorations on top.

Step-by-step photos of the New Year's product:

Make several of these lanterns, they will create amazing festive mood. They can be used to decorate christmas tree, room, any room. And if you take laminated paper or thin plastic, then the lanterns can decorate a street Christmas tree.

Lanterns made of thin tissue paper

This type of lantern is unusual, not the one we are all accustomed to since childhood. But he looks more like Chinese lanterns, traditional for celebrating the New Year in this exotic country. Lanterns made from thin tissue paper are very easy to make.

They add brightness to the holiday. You can also use them for corrugated paper. Let's prepare for the process:

• thin paper. One flashlight requires 2 sheets;
• needle with thread;
• Double-sided tape;
• braid or jute rope for a loop.

That's all that may be useful, now let's get started:

1. We connect 2 sheets and bend them in half lengthwise.
2. Fold them like an accordion, carefully ironing the folds with your palm.
3. We unfold the sheets. We connect one edge along the folds and stitch it with thread.
4. Now we sew the second edge with thread in exactly the same way.
5. We connect the joint with double-sided tape.
6. Now we hang the flashlight on the ribbon.

You can make several lanterns of the same color, or beautifully choose shades for a bright multi-colored holiday.

Master class on imitation of a real lantern made of thick paper with decor

Now let's see how to make an interesting flashlight - an imitation of a real street lamp. We will make it out of paper and beautifully decorate it with decorative branches and New Year's decorations.

To work you will need:

• thick colored paper or cardboard. The paper must be double-sided, that is, colored on both sides;
• ruler;
• scissors;
• pencil;
• a sheet of paper for a template;
• glue and brush;
• New Year's decor.

This decorative toy It’s very easy to do, you just need to be careful when making the pattern and cutting out the parts, and the effect is amazing. It’s quite possible to make such a flashlight together with children.

Like these ones beautiful lanterns You can make it out of paper with your own hands for the New Year 2018! Follow the steps described in the video and you will get amazing decorative item, which will add style and zest to your holiday!

Paper lanterns steel traditional attribute New Year's decor not only in Europe and Asia, but also on the American continent. Their history dates back to China, where they also served as decoration for festive processions dedicated to the Chinese New Year.

Lesson #1: Flashlight on a string

They will decorate any room. They can be hung on a Christmas tree, made into an openwork garland, or used as a cover for a miniature electric candle.

1. Take rectangular sheet colored paper and cut a strip about 1 cm wide along one of its narrow sides. Set this strip aside; you will need it later.
2. Fold the remaining paper in half lengthwise so that the right side is on the inside.
3. Measure 2 cm from the edge of the resulting rectangle, along the long side opposite the fold line. Draw a line parallel to the edge with a pencil.
4. Cut the fringe along the other edge of the rectangle, along the fold line, without going beyond the pencil line.
5. Unfold the rectangle and fold it in half again along the fold line, only in the opposite direction (turn it right side out).
6. Roll the sheet into a tube and secure the top and bottom with tape. Glue a “handle” to the top rim from a strip of paper cut from the sheet at the beginning of the work.

Another option is to make small holes in the headbands and thread a cord through them, as shown in the photo. By moving the top rim along the cord, you can adjust the curvature of the central part of the flashlight.

Another use case:

Attention! Paper can only be attached to garlands with LED bulbs that do not heat up when lit!

Master class No. 2: Diamond-shaped tissue paper lanterns

Light and elegant - that's what can be said about these flashlights. They may take a little longer to make than others, but the results are worth it. They will look especially impressive if you place a small battery-powered candle inside.

1. Place two sheets of tissue paper on top of each other and fold them in half lengthwise. Iron the fold.

2. Next, unfold the paper and gather it, without separating the sheets, into an accordion of folds approximately 1.5 cm deep

3. To make a smaller lantern, trim the edges of the accordion at an equal distance from the center. Then unfold the paper and turn it over so that the convex side of the center line faces the table.

4. Take a needle with a thick thread threaded into it. Gather one side of the sheet into an accordion again and pull the thread through the paper. Tie the ends together to make a closed circle.

Another option is flashlights with a loop that is not fully tightened.

Instruction No. 3: Round lanterns made from strips of paper

They look like Christmas balls and can be of any size: from very small to huge. A definite plus is that they are quite easy and quick to make.

1.Cut 15 strips of paper 1 cm wide

2. Make holes at both ends of all strips along the hole, retreating about 3 mm from the edge

3. Stack the strips so that the holes match, and insert a rivet into each end (their m Can be bought at a craft store)

You can attach a loop for hanging to the top rivet, and a tassel made of paper, beads or thread to the bottom one. In addition, such lanterns make excellent garlands!

Other options for decorations made from strips of paper:

The latest model is assembled from strips of different lengths, pre-glued into circles, diamonds and drops. They can be fastened together using double-sided tape or, if the material is thick enough, hot-melt adhesive.

Option #4: Lantern made of paper or cardboard circles

This type of lantern is also perfect for interior decoration and for the Christmas tree. If you make them from thick multi-colored paper, you will get a toy for children. And if you decorate them with different decorative elements or draw something on finished product- the result will be an absolutely unique thing.

1. Cut out 10 identical circles from thin cardboard

2. Fold all the circles in half, front side inside

3. Glue the circles together in pairs, side to side, until the circle is complete.

4. Before gluing the last two halves, insert a straightened piece into the center of the sphere. paper clip and secure it with a drop of hot glue. Bend the outer end of the paper clip with a hook - you will use it to hang the flashlight

5. Decorate the lantern with ribbons, tassels or other decorative elements.

Lesson #5: Flashlight “Drop”

This is another type of flashlight assembled from the same parts, but in this case you will need a template. You can download it.

As in the previous case, you need to cut, fold and glue a number of parts in a circle. The ones in the photo consist of 16 “drops”.

As a component of such decoration, you can use almost any figure, including openwork. Other options for New Year's lanterns of this type:

All of them are glued together according to the same principle as the model described above.

Master class No. 6: Indian lantern

This simple-to-make decoration looks quite unusual and pleasant. Choose Beautiful colors, decorate ready-made lanterns, give free rein to your imagination!

The flashlight consists of two sheets of paper in contrasting colors.

Outer layer (fringe):

1. Take a sheet measuring 12.5x25cm and make a fold about 5cm wide on both short sides. Smooth out the fold line and unfold the paper.
2. Using a ruler and a paper cutter, make parallel cuts with 1cm intervals between the two fold lines.

Inner layer (tube):

1. Take a 15x19cm piece of paper and place a strip of double-sided tape along each of the 15cm edges.
2. Roll the sheet into a tube and glue the two sides overlapping so that they overlap each other by about 5 cm.

Connection of parts:

1. Attach a strip of double-sided tape to the short sides of the outer layer of paper.
2. Glue one of the edges along top edge tubes, then, without creasing the fringes, glue the bottom edge.
3. Punch holes on opposite sides of the tube at the top of the lantern and thread ribbon or string through them for hanging.

Step-by-step instructions No. 7: Flashlight made from strips of paper and tube

Another project using two or more sheets of paper in contrasting colors.

1. Glue a tube from a shorter sheet.

2. Place a strip of double-sided tape along the top and bottom edges of the tube.

3. Cut from paper contrasting color long thin stripes.

4. Start gluing the strips one at a time, slightly overlapping, strictly parallel to the tube or slightly at an angle.

This is what the strips look like, glued at different angles.

5. Mask the gluing areas with a horizontal strip of paper or tape glued to hot glue or double-sided tape.

6. Attach a hanging loop to the top of the flashlight. Its ends can be glued under a horizontal tape or secured to the inner walls of the tube.

Video lesson

Another view. We invite you to watch detailed video manufacturing instructions.