Crochet bolero scarf description. Crocheted boleros for women and children

Bolero is a kind of cropped jacket. It does not fasten and is more likely to add zest to the outfit than for warmth.

The first boleros appeared about three hundred years ago in the wardrobe of Italian bullfighters. Women at that time did not differ much from modern ladies: they also wanted to look interesting and attractive. Without hesitation, they borrowed the idea of ​​an interesting cape from the courageous bullfighters, but added a little decor.

Playing with style and color led to the fact that the bolero was to everyone's taste and appeared in the wardrobe of every fashionista.

Despite the fact that the yard is no longer the 18th century, women still love the bolero. But buy suitable option it’s not always possible, so the craftswomen ask themselves: “How to knit a bolero with your own hands?”

Where to begin?

The first thing you need to decide is the model and style of the bolero. It can be fur, leather or fabric, with a long or short sleeve or completely untethered.


Still at the peak of popularity knitted bolero short-sleeve. Schemes and description of knitting for beginners and experienced craftswomen can be found on websites and forums, but we tried to collect for you the most interesting.

Let's decide which model you will knit.

What is the best way to knit a bolero for beginners: crochet or knitting? In fact, there are models that are easy to knit in both ways. Therefore, we offer both options.

Simple crochet bolero

The easiest way to knit a bolero is with a square. This does not require patterns. Simply knit a square (with any pattern). Its size is approximately 50 by 50 cm, for a size 44 figure.

The knitting process is simple and will be clear to any knitter, and detailed instructions how to crochet a bolero will help you achieve the best result.

  • Cast on 15-50 free stitches;
  • Knit them by choosing any pattern;
  • When the square right size is ready, fold it in half;
  • From the sides, set aside the armholes (at the fold), and sew everything below;
  • If sleeves are needed, tie armholes around until desired length(the same pattern as the bolero itself).
  • Cut the thread and pull it through the outer loop, do not forget to tighten the knot.

That's it, the bolero is ready!


Simple bolero knitting

The simplest bolero with knitting needles can be knitted with a satin stitch, but it will not look very presentable. But if you choose “grass” yarn, then the product will turn out to be interesting. It can just be knitted with a satin stitch, because the pattern from under the villi will still not be visible.

Bolero from grass

  • First, prepare everything you need: 2-3 balls of yarn (200-250 g), long knitting needles with limiters circular needles with a cable of about a meter, needles and pins for stitching.
  • Cast on 120 sts and work 100 rows in st. Be sure to pull the "villi" to the front side.
  • Knit a rectangle, close the loops and prepare the product for assembly.
  • Fold the product in half, leave armholes, sleeves, sew the rest.
  • Turn the bolero right side out and straighten the villi.

Openwork bolero

All girls, regardless of age, are very fond of lace. An airy openwork bolero looks much more advantageous and interesting than a lace one. It is more difficult to perform than the products presented above, but the result is worth the effort.

So, a master class on knitting a bolero for the summer.

Prepare everything you need: 100% cotton yarn (240 m in 50 g) - 60 g, hook - No. 1.5.

Make a pattern, make all changes in size in accordance with it.

Shelf: dial 76 air loops and leave three for lifting. Use the "wave" pattern (see Diagram 1). Each shelf should have 4 waves. We knit the neckline according to scheme 2.

Back: cast on 171 sts and add 3 more on the rise. When knitting, be guided by the pattern. In total, there should be 9 waves on the back. Leave an armhole 3-4 cm deep on the collar, then tie it.

Assembly: sew the parts of the product together. For strapping, make a ribbon in accordance with diagram 3. Sew it to the bolero. Use 2 pieces for ties.


What to wear with a bolero?

Bolero is a universal thing. With it, you can add brightness or tenderness, unusualness or severity to any outfit.

Most successfully combined with a bolero:

  • knitted dresses;
  • tight turtlenecks;
  • jeans, skinny pants;
  • tight skirts.

From footwear, it is better to prefer shoes or ankle boots, although playful youth models can also be worn with sneakers or sneakers.


Few people know that a snow-white openwork bolero can make it more refined and wedding attire bride. It will make the dress play in a new way and make it interesting.

In addition, any accessory and wardrobe item made by oneself is unique and unrepeatable, and this is especially important on the wedding day. Bolero's photo wedding image convinces of the need for his presence on the fragile shoulders of the bride on the most important day.

Photo instruction how to crochet a bolero

Bolero crochet- a very delicate accessory that anyone, even the most ordinary everyday outfit, gives a touch of femininity and tenderness. Its openwork floral motifs will decorate the simplest dress, give a special charm to a nondescript top, sweater or blouse - that's why it is so important to replenish your wardrobe with a bolero, which can come in handy at the most unexpected moment.

Of course, there is always the opportunity to purchase the model you like in a store or on the Internet, but it is much more pleasant to create a thing with your own hands, and besides, apart from the cost of tools, it will be completely free.

Patterns and description of crocheting a bolero for a woman

This necessary addition can be connected according to your own idea, taking into account your own needs and taste preferences- you just need to use the appropriate diagrams and descriptions of the work on the bolero. Even beginners in crochet can knit such a cape on their shoulders, and experienced needlewomen can always choose more complex options knitting bolero.

To begin with, it is better to decide on the season for which your bolero model will be intended. If we are talking about summer, you should choose linen or cotton yarn, but it is better to knit a warm version of a bolero for the cold season from wool. After that, you can choose the scheme you like and get to work.

A simple model for beginner needlewomen

In this section, we will talk about a simple sleeveless bolero model for the summer - a minimum of knitting and a beautiful result. Another big plus for knitters with little experience is that the bolero is knitted in single crochet stitches. Such an openwork jacket will help to crochet a bolero knitting lesson for beginners.


Size

materials

  • fine yarn 60 g - (200 m in 50 g);
  • hook number 3.

Progress

Cast on 35 loops on hook #3. 3 of them will go up, over the rest we will knit the 1st row of boleros.

In the 1st row insert the hook into the 32nd loop (4th loop from the hook) and knit a column with 1 crochet. We do the same with the previous loop. Then we collect 2 air loops on the hook, skip 2 loops of the 1st row, in the next 3 air loops we knit 3 columns with 1 crochet. We've got a rapport. Repeat this step until the end of the row (you should get 5 repetitions).

At first 2nd row we collect 5 air loops. We knit 3 columns, stretching the hook under the arch between 2 columns of the previous row.

We collect 2 air loops, we knit 3 columns in the next arch. We knit like this, repeating the rapport, until the end of the last loop of the row (4 repetitions). We collect 2 air loops, 1 column in the last loop.

3rd row: we collect 3 loops, we knit 2 columns in the arch. Rapport: 2 air loops, 3 columns in the arch. We knit rapport to the end of the row. You should get 6 repetitions.

IN 4th row we repeat knitting in 2 rows, in 5 - 3 each. We knit a rectangle 34 by 12, alternating knitting 2 and 3 rows.

We form a strap: we collect 107 loops. We lower the chain down and connect with bottom corner connecting column. We knit the bottom of the bolero with a half-column to go to another corner. We collect 107 loops and also connect them to the lower corner with a half-column. It turned out a rectangle with 2 straps.

Tie straps and lower part bolero, moving from right to left: we collect 5 air loops, we knit 3 columns into the arch, 2 loops, 3 columns into the arch - 2 loops / 3 columns repeat to the end of the row. On the straps, after 3 columns, we collect 2 loops, skip 2 loops and knit 3 columns again. We finish the row with a half-column, stretching the hook into the 1st air loop of the beginning of the row.

The last row, bolero strapping: we collect 3 air loops, we knit 2 columns into the arch of the previous row; * 3 loops and 3 columns in the same arch. 2 loops and 1 column in the next arch of loops * - repeat the rapport from * to the end of the row.

Finish the row with a half-stitch in 1 loop of the beginning of the row. The thread is cut, pulled through the last loop and tightened. If you want the straps to be wider, then continue to repeat the last row to the desired width.

How to knit a beautiful bolero from motifs

If desired, you can link beautiful bolero from individual openwork motifs most different shapes and sizes. Let's try to crochet a bolero from motifs round shape with a summer floral pattern that any woman will love to wear. To do this, the following scheme of work is useful.


Size

materials

  • yarn (97% cotton, 3% metallic polyester, approx. 85 m / 50 g) - 300 g pink-orange;
  • hook number 5.

We knit patterns according to the scheme

Main pattern


Knitting density

1 motif = 13 x 13 cm.

Pattern


Progress

Knit motives separately, in last row each next motive joins the previous motive Art. b / n in the arch from the v.p.

Knit according to the knitting pattern.

To attach the sleeves and sides, knit, respectively, half of the motive.

Motifs A and B knit completely, they are separated only in the drawing.

Assembly

Moisten the details slightly, stretch according to the knitting pattern and leave to dry completely.
Tie all edges. b / n and arches from v.p. (see the drawing of the connection of floral motifs).

Insert the hook into deep arches with 1 tbsp. s / n to smooth the edge.

Master class on knitting an openwork bolero

The crochet bolero itself is very beautiful thing, and if you combine crocheting and knitting, the result will be incredible beautiful product. Of course, such a thing will have to be given more attention and spent more time and effort on it, but the work will be rewarded with the birth of the most beloved thing in a woman's wardrobe. So, let's take a closer look at how to crochet an openwork bolero for women - the diagrams and description will help with this.


Size

materials

  • yarn (100% cotton; 120 m / 50 g) - 300 (350) 400 g col. cyclamen;
  • knitting needles No. 3.5;
  • hook number 3;
  • device for knitting a cord.

We knit patterns according to the scheme

Wicker background with offset

Knit according to scheme A. Run 1 time 1-4th rows, then constantly repeat the 3rd and 4th rows.


Main pattern

1st row: art. s / n.

2nd row: * 1 tbsp. s / n, 2 vp (skip 2 sts of the previous row) *, from * to * (= fillet) constantly repeat, finish 1 tbsp. s / n.

3rd and 4th rows: knit as 2nd row, insert hook into st. s / n, respectively.

5th row: only st. s / n.

Lace

We knit according to scheme B.


Petal

On knitting needles No. 3.5, dial 5 loops and knit stockinette stitch(= front rows - facial loops, purl rows - purl loops). Run 5 times in each front row on both sides of the middle loop 1 yarn over.

Then perform 2 more times in each front row on both sides of the middle loop 1 yarn over, but at the same time on both sides along the edge, subtract 2 x 1 st next to the edge.

Continue to work as follows: edge, remove 1 loop as a front, knit 2 loops together with the front and stretch it through the removed loop, edge. In the purl row, purl the loops.

Then knit 3 loops together and pull the thread through the last loop.

small flower

1st circular row: in a ring of thread, perform 1 ch. and 6 st. b / n, 1 connection. Art. in v.p.

2nd circular row: * 5 ch, 1 tbsp. b / n *, from * to * constantly repeat, 5 vp, 1 connection. Art. in the 1st v.p. circular row (= 6 petals).

Knitting density

24 vp (= 2 repeats) x 8 rows = 10 x 10 cm.

Pattern


Progress

Back

Crochet No. 3 to complete a chain of 103 (115) 127 ch. and knit 1 time 1-5th rows of the main pattern.

Continue working with a wicker background with an offset.

After 16 (18.5) 21 cm from the initial row, subtract for armholes on both sides 1 x 6 p. And in each next row on both sides, subtract another 6 x 1 p. = 79 (91) 103 p.

Left shelf

After 36 (38.5) 41 cm from the initial row, finish the work.

Right shelf

Crochet No. 3 to complete a chain of 49 (55) 61 ch. Knit acc. sequences of patterns, as on the back.

After 16 (18.5) 21 cm from the initial row, subtract 1 x 6 p. for the armhole along the right edge of the work and in each next row another 6 x 1 p. = 37 (43) 49 p.

After 25 (27.5) 30 cm from the initial row, decrease for the neck along the left edge of the work 12 p. And in each next row, subtract 4 x 3 p. = 13 (19) 25 p.

After 36 (38.5) 41 cm from the initial row, finish the work.

Sleeves

Crochet No. 3 to complete a chain of 67 ch for each sleeve. and knit acc. sequences of patterns, as on the back.

For the side bevel of the sleeves, add after 18 cm from the initial row on both sides in each 3rd row 5 x 1 p. (After 10 cm from the initial row in each 3rd row 7 x 1 p.) In each 3rd row from the initial row 10 x 1 p. = 77 (81) 87 p. Include the added loops in the pattern.

After 45 cm from the initial row, subtract 6 sts for the sleeves on both sides and in each row on both sides 6 x 3 sts and 6 x 2 sts (8 x 3 sts and 4 x 2 sts) 10 x 3 p. and 2 x 2 p. = 5 (5) 7 p.

After 60 cm from the initial row, finish the work. Knit the 2nd sleeve in the same way.

Assembly

Run shoulder seams. Sew on the sleeves. Sew side seams and sleeve seams.

The sides of the shelves and the edge of the neck tie 1 next to Art. b / n and then perform lace acc. scheme B.

With knitting needles No. 3.5, make 30 petals and randomly sew in the form of flowers with 5 petals.

The bolero perfectly helps little fashionistas to solve the issue of regularly changing looks and styles, because the same thing will look completely different in a duet with two different models bolero. Not to mention the fact that these beautiful capes not only decorate, but also protect from the coolness in the off-season.

Modern bolero models have long gone beyond their classic look: from the top of the Spanish national costume they transformed into a purely feminine required attribute wardrobe. Now the cuts of these jackets can vary: be elongated; similar to vests; have absolutely incredible patterns or be the most simple and light.

The choice of bolero models for women and girls is great, but most of them can be created by hand if you find suitable schemes with descriptions of knitting or crocheting. In this article, we will Special attention crochet jackets for girls.

The scheme and description of crocheting a bolero for a girl

Crocheting a bolero is a pleasure, because there are a lot of models of this product: for summer or for winter; openwork or dense; short or long; with fasteners, sleeves, collars, coquettes or without them. These knitted jackets look good with most outfits - both casual and formal. And complete with other products made in the same style, boleros on girls look very interesting and stylish.

A simple model for beginners


Let's start by creating a simple crochet bolero for a girl - knitting for beginners will be available thanks to step-by-step photos. This article will be useful to those who want to try their hand, but are not sure of the knowledge. To crochet a bolero for a girl, beginner knitters will be able to do it if you use detailed master class With step by step photos work.

Bolero size for girls:

for 5-6 years, height 116.

Materials for work:

  • yarn Pekhorka "Children's cotton" (330 m / 100 gr) - 150 gr;
  • hook number 2.5;
  • satin ribbon in tone, 0.5 cm wide, about 2.5 - 3 meters.

You can use any yarn of the same thickness, and to get a warm version of the bolero, it is better to take a wool-blend yarn.

Back knitting pattern:

Important: the end result of knitting a product may differ from that shown depending on the density of knitting, the manufacturer of hooks and knitting needles, so it is important to compare your product not only with the attached description, but also with the size of the pattern.

Knitting back

We collect a chain of 82 air loops + 3 lifting air loops and knit according to the above pattern, starting with 1 air loop. The first row of alternating double crochets (CCH) with air loops (VP). It should turn out to be 34 cm long. We knit the second row according to the scheme: 4 air loops, 5 double crochets. Run 2 air loops of the pattern and knit in the 4th loop of the bottom row (skip 1 double crochet, look at the bottom row) 3 double crochets in one loop.


Run again 2 air loops of the pattern. The first report of the pattern is finished. Further 5 "intermediate" columns. Let's look at the diagram. We knit the third row according to the scheme, while 3 columns knitted in one loop are now knitted together. It turns out "diamond". We knit a row of columns with a crochet / 1 air loop.


In the next row, we shift the pattern by half the report in a checkerboard pattern (see the pattern diagram). Then we knit the 6th row of "diamonds". Next, we knit with a pattern according to the pattern until we reach a back height of 8 cm (at the same time, we control the width of the product 34 cm: we lay out the product a little stretch so that the width is 34 cm, then we measure the height). You can close the loops for the armhole simply by applying the product to the drawn in life size pattern or do it according to the attached scheme.




Bolero pattern for girls.

Next, three loops are knitted to close the armhole. We make 3 lifting air loops, replacing them with the first double crochet in the diamond pattern. Then you need to knit according to the pattern. Without knitting 3 loops to the end of the pattern, we knit 2 double crochets in a row at the end of the row. In the next row, you need to close one loop on each side. To do this, 3 lifting air loops are knitted and immediately after them a double crochet is knitted, thereby closing 1 air loop located between the double crochets. We knit a row according to the pattern, closing 1 loop on the other side (according to the scheme). On this, the armhole cutout is ready.


Next, you need to knit in the pattern straight until the height of the product reaches 21 cm. Fasten the thread, leaving the end longer for stitching the shoulder seam (about 50 cm, I can’t specify exactly, it’s better to leave a little more). The knitting of the back is completed.


Knitting flowers and sleeves

Wrap the thread on your finger once and knit 1 air loop and 1 single crochet into the resulting ring. This will be the beginning of the series. Run 10 air loops and knit a single crochet into a ring. It turned out the basis for knitting a petal. Run 6 such rings for the petals, while finishing the last chain with a connecting loop in the first single crochet.

We perform the petal according to the scheme: 3 single crochet, 5 double crochet, 2 air loops, 5 double crochet, 3 single crochet. Repeat the pattern for all six petals. We close the row with a connecting loop, stretch the thread to the wrong side and cut it off, leaving 8-10 cm. We tighten the middle of the flower by the first end of the thread and tie the tails of the threads together. The first flower is ready. Next, we will knit flowers, connecting them into a bar of 5 motifs in the process of knitting.


We carry out the first row of the flower (the first paragraph of the subparagraph). Next, we tie the first petal completely and the second before the beginning of the air loops.

We make one air loop, put the first flower on the hook front side to yourself for an arch of 2 air loops, we perform the second air loop, thereby connecting 2 flowers at the tops of the petals. We complete the binding of the second petal.

Tie the third petal to the middle and connect it with the next petal of the first flower. Finish knitting all the petals of the second flower. Knit a bar of 5 flower motifs in this way, connecting them with each other for 2 opposite petals. At the edges there is one free petal.


Then you should perform the same bar for the second shelf (another row of 5 connected colors). Scheme of strapping the right shelf:


Tying motifs 1 row. We begin the binding from the extreme left motive. We insert a hook into the arch of 2 air loops of the third free petal (we count from below, from right to left, see photo and diagram) and knit 2 single crochets. We carry out the binding of motives carefully following the scheme. Knitting goes in a circle counterclockwise. We complete the row with a connecting column in the first column without a crochet.


Scheme of strapping the left shelf:


We carry out the binding of the left shelf in the same way, starting from the third petal, but starting from the rightmost motive. We carry out the first circular row of strapping. Next, we knit according to the scheme only along the inner edge of the shelf. The result is 3 finished bolero parts. We immediately sew the side and shoulder seams to see how the bolero will sit on the child and to make it easier to control the required sleeve length and armhole depth. We carry out the first row of tying the edge of the product according to the scheme (a single crochet, 4 air loops, a single crochet into the next double crochet of the previous row, the bottom and neck are tied through a column, see photo and diagram).


The second row of tying the edge of the product is shells of 4 double crochets in a single crochet of the previous row and a connecting loop in an arch of 4 air loops of the previous row. In the corners of the neck, instead of a shell of 4 double crochets, perform 1 double crochet so that the neck lies flat and does not turn out to be a stand-up collar.


We start knitting the sleeve by completing 3 floral motifs, in the process of knitting, connecting them into a ring.


How to tie a sleeve according to the diagram in step-by-step photos:


Please note that in this model, the bolero sleeve in length reaches the phalanges of the fingers and thumb sticks in floral motif. If you want to get a classic sleeve, shorten the knitting of the main pattern by right amount centimeters (5-6 rows - put the vest and sleeve on the child, and attach the edge of the sleeve to the edge of the armhole at side seam). At this stage ends circular knitting and then we will knit in turning rows, closing 1 loop on each side in each row. So we knit 7 rows, decreasing in each row 1 loop on each side. The total length of the sleeve is 41 cm, not counting the binding of the sleeve, which is carried out in the following paragraphs. The sleeve width is 11 cm (full girth 22 cm). We tie the bottom of the sleeve according to the scheme above.


The finished bolero must be slightly steamed from the wrong side in the “cotton” mode, while you should not press the iron, hold it slightly overhang so that the product retains its knitted relief. You can also steam the product through gauze or a white diaper. In the edge of the product between the shells we pass satin ribbon, tie in a knot, and then another knot over the edge of the bar so that the ribbon “sits in place” when tying the bolero. We also thread the tape into the sleeves.


Beautiful product for a girl of 3 years


To please the baby with a new thing, you can make a little effort and knit such a beautiful jacket with your own hands. Let's take a closer look at how to crochet a bolero for a girl of 3 years old with a description and diagrams. This product can also fit a 3.5 year old baby.

Materials for work:

  • 100 g of threads in the color of baked milk (92% acrylic, 8% metallic) 400 m / 100 g;
  • hook number 3;
  • button in tone.

Work schemes:


Crochet bolero pattern.

Before work:

Before you start creating a bolero, you need to make a pattern in full size taking into account the individual parameters and measurements of the girl to whom the bolero is intended. Next, you need to tie and steam a sample of 10 x 10 cm with the main pattern for the preliminary calculation of the loops.

Progress:

We will knit a bolero from the bottom up with one canvas. Recruiting required amount c.p.

First r. 3 v.p.p., 3 tbsp. s / n, * 1 ch, skip 1 loop, then knit 4 tbsp. s / n *, continue from * to the end of the row. Finish a number of Art. s / n.

Second r. The whole row is knitted with arches from 5 ch, fastening from 1 tbsp. b / n in 1 cp first row

Third r. We knit similarly to the second arches of 5 ch, we fix them with 1 tbsp. b / n in the middle of the arches of the second row. But you need to start with 3 vp. and finish 1 tbsp. s / n.

Fourth r. 3 vp, we knit arches from 4 vp, we fix them st. b / n in the middle of the arches of the third row. Due to the fact that we started and finished the third row higher, the fourth row will turn out to be even for knitting the fifth row.

Fifth r. fit in the same way as the first. In every 4 v.p. we knit st. s / n, and over art. b / n we knit 1 ch

For a pattern, repeat knitting 4 rows.

When the first 4 rows are knitted, it is necessary to continue knitting with increases according to the second pattern for the next 13 rows, then knit 8 rows without increases and decreases. Next, you need to divide the canvas into 5 parts. On the pattern, we have 19 cm for the right and left front shelves, 10 cm for the armhole and 20 cm for the back. Your numbers may be slightly different depending on the individual parameters of the girl. Designations can be done with a thread contrasting color, a pin or a special plastic marker that can be bought at a needlework store.

Shelves

We knit openwork pattern. We make the loops decrease along the outer edge in accordance with the pattern and the first diagram, which shows how to evenly decrease the loops. It will be approximately 23 rows in height.

Back

We knit straight without increases and decreases to a height of 23 rows.

Sleeves

It is necessary to attach a thread to the 4th row of the back, tie 35 ch. and stick on the shelf. Now we need to knit 8 rows in a pattern without additions and decreases on these 35 ch. Then you need to knit decreases according to the first scheme to the end of the sleeve.

Sew shoulder seams and sleeves.

Now by front side we tie the whole bolero as follows (see the third diagram):

First r.*2 tbsp. s / n, skip 1 loop, ch 1 * continue from * to the end.

Second r.*2 tbsp. b/n, pico*. Continue to the end.

Now according to the fourth scheme we tie a button :

First r. In a ring of 3 ch. tie 6 tbsp. b/n.

Second r. The number of loops must be doubled. In each we knit 2 tbsp. b/n.

Third r. We double the loops in every second.

Fourth r. We double the loops in every third loop.

Then we knit by analogy until the diameter of the circle reaches the diameter of the button. Now you need to attach the button to the wrong side of the circle. Knit 1 row without increases, and then knit rows with symmetrical decreases of loops. Pull the thread through the last 6 loops and tighten tightly.

We sew a button on an openwork strip. Arch of 5 v.p. on the opposite shelf will serve as a loop. Bolero is ready.

We knit an openwork bolero


If we talk about the methods of knitting bolero patterns, then we cannot fail to mention short jackets for girls. In combination with long sleeves, the product looks very romantic. Consider how to crochet a similar openwork bolero for a girl of 4-5 years old.

Dimensions of the finished bolero:

Length - 20 cm; width - 26 cm; sleeve length - 23 cm.

Materials for work:

  • 1 skein of YarnArt IBIZA yarn (60% viscose - 40% acrylic; 100g - 550m);
  • hook number 3.

Knitting patterns:



Knitting pattern for the main pattern for a bolero.

Bolero sleeve knitting pattern.

Progress:

We collect the required number of air loops, a multiple of ten.

First, the back is knitted with the main pattern according to scheme 1, having knitted seven centimeters, we cut small armholes for the sleeves, somewhere in a couple of centimeters (the height of the armhole is 13 centimeters). Having knitted another ten centimeters, it is necessary to make a cutout for the neck and knit another three centimeters.

Then we knit the two front shelves. We collect the required number of loops, knit about eight centimeters and begin to reduce a little with each row, for a smooth neckline. We knit the second shelf in mirror reflection first.

When all the pieces are connected, they should be sewn together. Top seams first, then side seams.

The sleeve is knitted separately and sewn or crocheted, which allows the product to stretch and hold perfect shape. First, 12 centimeters of the sleeve are knitted, then it is reduced to the size of the armhole and sewn on. After that, we knit the sleeve with another pattern according to scheme 2. First, we knit from the first to the fifth row, and then repeat from the second to the fifth.

Master class on creating a summer bolero


It would be a great idea to crochet a summer bolero for a girl, because this versatile piece will diversify the wardrobe of a little fashionista. A master class in crocheting a bolero for a girl with diagrams and descriptions will help in this. This bolero is suitable for girls 5-6 years old.

Bolero size:

Materials for work:

  • hook No. 1.5;
  • yarn - DIVA 100% microfiber acrylic (350 m, 100 g) Pink colour- 200 g., purple- 100 g;
  • tape - 1 m.

Knitting pattern


Progress

First we knit the back, then the shelves, sleeves.
Back: knit a chain of 89 air loops and knit 15 p. Further, for the armholes, decrease the loops on both sides in the next five rows according to the scheme (73 loops). Continue knitting another 7 p. (total 27 rows).

Right shelf:

Knit a chain of 13 air loops. Next, knit 15 p., Gradually adding loops in each row with right side loops. Then on the left side decrease the loops for the armhole and at the same time on the right side decrease for the neckline according to the diagram. After knitting 12 rows, finish knitting (10 loops).

Left shelf:

Knit symmetrically to the right shelf.

Sleeves:

Knit a chain of 49 air loops, knit according to the scheme (for a bolero with long sleeve- 15 p., with a short sleeve - 11 rows). Next, decrease the loops according to the scheme in six rows. Finish knitting (13 loops).
Tie the sleeves and back according to the pattern with purple threads. Details of the product to wash, sew.

Bolero decoration:

Tie flowers. It turned out 17 flowers that need to be connected together.
Tie the right and left shelves, the neck of the back according to the scheme.
Sew a ribbon of flowers to the shelves and neck of the back. The bolero can be decorated as you wish, for example by tying small flowers of a different color.


Dimensions:38/40 (Р1), 42/44 (Р2), 46/48 (РЗ), 50/52 (Р4)

You will need:yarn Appu Blatt: 8/9/10/10 skeins Louxor (100% cotton, 140 m/50 g) black (383); knitting needles No. 3.5; hook number 3; 108 round silver and gray beads. Patterns: faces. smooth surface, st. b / n, " step step", Art. s / n (see page 24).

fantasy pattern:the number of loops is a multiple of 5 +1 p. for symmetry. 1st p.: * 1 tbsp. b / n, 5 air. p., skip 4 p. *, repeat from * to *, finish 1 tbsp. b/n. 2nd p.: 3 air. lifting point, 3 air. p., * 3 tbsp. s / n, knitted together in the 3rd air. arches (1 yarn, insert the hook into the loop, 1 yarn, pull the loop, 1 yarn, insert the hook into the same loop, 1 yarn, pull the loop, 1 yarn, pull the thread through all the loops), 5 air. *, repeat from * to *, finish 3 tbsp. s / n, knitted together, 3 air. p., 1 tbsp. s / n. 3rd river: 3 air. lift, * 5 air. p., 3 tbsp. s / n, knitted together in the 3rd air. n. arches *, repeat from * to *, finish 5 air. p., 1 tbsp. s / n. Repeat 2nd and 3rd p.

Little leaf. 1st p.:5 persons. 2nd p. and all even rows: out. p. 3rd p.: 2 persons., 1 yarn, 1 person., 1 yarn, 2 persons. 5th row: 3 persons., 1 yarn over, 1 persons., 1 yarn over, 3 persons. 7th row: 4 persons., 1 yarn over, 1 persons., 1 yarn over, 4 persons. 9th p.: 1 person., 2 p. together with a slope to the left, 5 persons., 2 p. together persons., 1 person. 11th p.: 1 person., 2 p. together with a tilt to the left, 3 persons., 2 p. together persons., 1 person. 13th p.: 1 person., 2 p. together with a slope to the left, 1 person., 2 p. together persons., 1 person. 15th p.: 1 person., 3 p. together persons., 1 person. 17th p.: 3 p. together, persons.

big leaf:knit according to the appropriate pattern.

Knitting density, fantasy pattern, hook number 3:25 p. (5 motives) and 7 p. = 10 x 10 cm.

Back/front:dial a chain of 111/121/131/146 p. and knit with a fantasy pattern, respectively, 22/24/26/29 motives. At a height of 36 cm, knit the armholes of the sleeves, decreasing on each side for P1 6 x 1/2, for P2 8 x 1/2, for P3 8 x 1/2, for P4 10 x 1/2 motifs. There will be 16/16/18/19 motives left. At a height of 43/44/45/46 cm, cut the neck according to the scheme. At a height of 56/57/58/59 cm, finish the work.

Sleeves:dial a chain of 11 p. and knit with a fantasy pattern according to the scheme. When there are 5 motives in the work, add in the 7th p. a chain of 20 p. on the right and a chain of 17/1II20/20 p. on the left. We get 12/12/13/13 motives. Continue knitting with a fantasy pattern, adding on each side for P1 in every 5th p. 4 x 1/2 motifs, for P2 and P3 in every 4th p. 4 x 1/2 motives and in each 3rd p. 2 x 1/2 motifs, for P4 in every 3rd p. 7 x 1/2 motive, after 2 p. 1 x 1/2 motive. We get 16/18/19/21 motive. At a height of 42 cm (30 p.) To form a sleeve okon, decreasing on each side in each row, first 1 motif / 2 x 1 motif / 2 x 1 motif / 3 x 1 motif, then cut 1/2 motif in each row to the top of the sleeve. At a height of 58 cm, finish the work. Knit the second sleeve in the same way, for P1 and P2, knit the bottom of the sleeves in a mirror image.

small leaves:knit 8 leaves for each sleeve, 36 for the front and 36 for the back.

Big Leaves:knit 4 leaves for each sleeve, 18 for the front and 18 for the back.

Assembly:sew groups of 2 small and 1 large leaflet on the back, in front and along the bottom of the sleeves. Then sew on 3 silver and 3 gray beads (see photo) on the front and back. Run the side and shoulder seams, as well as the seams of the sleeves. Sew sleeves into armholes. Tie the bottom of the sleeves 1 p. Art. b/n. Tie the neck and bottom of the product 1 p. Art. b / n and 1 p. "crayfish step".