Flowers in the form of a ball. Paper pom-poms, honeycomb balls, ribbed balls, paper balls: made from paper, made from corrugated paper, made from crepe paper, made from DIY cards. Honeycomb paper balls from Aliexpress
The fantasies of florists are limitless, thanks to which we are often delighted with the most unusual jewelry from flowers. Despite the complexity of many compositions, we are nevertheless able to do some things ourselves. The Land of Soviets will tell you how to make an elegant ball of flowers.
DIY flower ball
We will need:
A sponge ball (also known as an “oasis”) with a diameter of about 20 cm
Flowers – about 50 pieces. Chrysanthemums, carnations and others are suitable.
Scissors
Step 1. Prepare the flowers. To do this, they need to be cut at an angle so that they absorb moisture better. Leave 3-5 cm of stem to insert the flower into the oasis.
Step 2. We insert the first flower at the top of the sponge and continue to place the flowers around the circumference to form an even line. This will allow the finished ball to look neat. The flowers should fit tightly together so that the surface of the oasis is not noticeable.
Step 3. Turn the ball over so that the first row you make runs parallel to the table. Continue filling the oasis, starting this time from any flower. We continue to insert flowers around the circumference.
Step 4. Now you can arrange the flowers in the oasis in the way that suits you. Make sure the composition looks neat. Ready ball of flowers will be a wonderful decoration for any table, including festive and business ones. You can make a balloon bouquet for the bride in almost the same way. But it requires a smaller sphere, about 7-9 cm in diameter. The choice of colors will also require a separate approach. You can combine white, soft pink, blue and green colors. Roses, ranunculus, and white carnations are suitable. They can be combined with irises, astromerias and other flowers, as well as with green twigs.
DIY flower bouquet for the bride
Step 1. Since the bride must hold this ball in her hand, it will need a convenient mount. It is made from wire and lace. It is better to sew lace on satin ribbon. First, we determine the size for the ribbon by wrapping it around the bride’s hand. Then we place the wire in the middle, bend it in half and twist it - the wire loop now tightly holds the tape.
Step 2. We pierce through the oasis with the ends of the wire folded together. The ribbon with lace should fit snugly against the ball on the other side. To prevent it from getting dirty during operation, wrap the tape with film.
Step 3. We bend the protruding ends of the wire and hide them in the oasis. To secure the lace more firmly, you can take a light, thin die and wrap the same loop around it as for the ribbon. Also, before distributing the colors, the ball can be wrapped in mesh.
Step 4. Attach the flowers. If we use different types, as well as green branches, the composition must be thought out in advance. The oasis is filled with flowers, starting from the lace handle. It is important to monitor the balance so that it is not pulled to one side. If the twigs or stems of the flowers are very soft, then you will need to make shallow holes in the sphere with a thin stick. Such festive and elegant balloons are made not only from fresh flowers, but also from artificial flowers. Often they are even lighter and are used to decorate rooms - they are hung on the ceiling, walls and window openings.
They can be attached to a floral sponge in the same way as live ones. But for greater reliability, it is necessary to apply glue to the stem and only then insert it into the sphere. If you use flowers of different sizes for the ball, then first place large inflorescences over the entire surface. Place medium flowers between them, and the remaining gaps can be filled with small ones. Balloons made from fabric flowers look very airy. Paper ones also look beautiful. Their size, design and application will depend only on your imagination.
The origami technique is multifaceted; it includes not only the folding of various models from a sheet of paper, but also modular figures, which involve the production of identical elements and their subsequent combination into one whole. It is on this principle that kusudama is made, as it is called flower balls, created from individual elements.
The Japanese word "kusudama" translates to "medicine ball". Previously, the Japanese placed various healing herbs and placed it over the sick man's bed. And these days these magic balls are used simply for decoration and decoration of premises.
Kusudama - photos and diagrams of how to make
In this master class I will show 5 options - how to make kusudama from paper with step by step photos with your own hands.
Openwork paper ball
These paper balls with a brush can be used to decorate rooms or hang on New Year tree. It all depends on your imagination. The openwork ball turns out to be very original and beautiful.
To create it you will need the following materials:
- stripes white– 30 pieces (size 4.5x9 cm);
- stripes of blue color– 30 pieces (size 4.5x9 cm);
- PVA glue;
- strong knitting thread.
Stages of work:
Take a blue strip of paper and fold it in half from left to right.
Then return to the starting position. Thus, the middle of the strip is visible.
Bend the upper left corner of the strip up to the middle.
Do the same with the second corner, that is, the right one. You just need to bend it from top to bottom.
Now bend the upper left corner down and the right corner up to the center line.
Repeat steps 3 and 4 again.
Now carefully unfold everything to the initial position of the leaf.
Take a white piece of paper and fold it in half.
Then step back about 0.5 - 0.7 mm down and bend again.
Carefully fold the leaf to the middle like an accordion.
At the end last time There is no need to bend the corrugation; there should be a protrusion.
Do the same with the second side of the workpiece. In the end it should look like this.
Now you need to bend the lower left and upper right corner.
WITH reverse side the workpiece looks like this.
Then bend on both sides along the marked lines.
We bend the entire part along the lines of the blue blank. In the end it comes out like this.
The white center must be glued using PVA glue.
There should be 30 such blanks.
Now assembling the ball. Take one module and coat the pocket near the corrugation with glue.
Glue the second module in the same way as in the photo.
So glue 5 blanks together.
Continue gluing the side modules in a circle until a ball is formed.
At the end, make a brush and attach it to the ball.
It turns out so beautiful and original openwork ball from paper. It can be used simply for interior decoration.
In addition, this craft can be done with children and involve them in creativity.
Sonobe ball
This kusudama is perfect for a beginner. It consists of only 30 modules, which are very easy to fold.
To work, you will need 30 paper squares with a side of 8 to 10 cm. It is very convenient to use leaves from writing blocks, but you can cut squares from colored paper. In this version, 8.5 cm squares are taken in five different colors.
Let's start folding the module. Take a square of paper and fold it in half.
Unfold and fold the edges again towards the midline.
From opposite sides we bend the corners to the first horizontal line.
Bend the corners again.
Fold the sides towards the center of the square.
Make two diagonal folds.
We repeat the action in the other direction to get this pattern of lines.
We turn over one side of the workpiece and put a corner there.
We return the bend to its place.
On the other side, we tuck the edge of the paper into the resulting pocket to create a diamond shape.
Fold the rhombus in half.
We fold the triangle towards the center of the module.
We do the same with the other edge. The module is ready.
When all 30 pieces have been collected, we begin assembling the kusudama. We push the corner of one part into the pocket of another.
We form a pyramid of three modules.
In the future, when assembling, we focus on the “star” of five pyramids. This is what the correctly assembled side of the kusudama should look like.
We continue to collect. If the modules were made carefully, then everything will turn out smoothly and without glue. The last 2-3 modules are difficult to insert. Make sure your creation doesn't fall apart.
Our kusudama is ready.
You can decorate it with a ribbon or tassel and attach a loop for hanging. Or you can leave it like that.
Kusudama flower ball "Bells"
The bells are very beautiful flowers. They can be easily made from paper and shaped into a ball. A little-known technique called kusudama will help with this. At first glance, it may seem that the craft is very complicated, but it is not so. If you strictly follow the instructions, you can make such a ball quickly and easily.
Necessary materials:
- paper squares measuring 8x8 cm - 60 pcs.;
- PVA glue;
- paper clips;
- knitting thread;
- big bead.
Step-by-step diagram for making a kusudama ball
01. Take one piece, that is, a square and place it acute angle up to make a diamond shape.
2. Now bend the workpiece from bottom to top horizontally.
4. Then bend the left half in half from top to bottom.
5. Bend the right half of the workpiece down. Then bend it in half.
6. Now fold the left corner of the module towards the right so that they do not overlap each other, but simply touch.
7. Hide the right corner of the module as shown in the photo.
8. Bend the upper triangle, which extends beyond the workpiece lines, down.
10. It is necessary to make 60 such blanks.
11. Each flower consists of five modules. They need to be glued in a circle. In order for them to be fixed, they must be fastened with paper clips.
12. There should be 12 flowers in total.
13. All bell blanks also need to be glued together with glue and secured with paper clips.
14. Glue the remaining flowers in a circle and form a ball.
15. Make a brush from knitting thread.
16. After the ball has dried and the parts are holding tightly, remove the paper clips and pull a brush through any hole in the ball and secure with a large bead. Kusudama ball “Bells” is ready.
This is the kind of beauty you can make with your own hands. This ball can be hung on a window or on a wall in a room. They can also be used to decorate Christmas tree. It all depends on your imagination and preferences.
Master class on making something like this bright flower paper kusudama.
To work, you will need a colored sheet of paper, some object for drawing circles, a pencil, scissors, and PVA glue.
Draw six identical circles on paper and cut them out.
Fold one of the circles in half.
Let's unfold it, after which you need to make a fold in the middle on one of the halves.
Turn the workpiece over to the other side and form small indentations in the upper part.
Apply a little PVA glue to one fourth of the circle from the edge.
Let's connect this part of the circle, and then apply glue to the other quarter of the circle.
Let's glue it together, our workpiece takes on the following form.
This is what one of the petals looks like from the front side.
Using the same principle, we make 5 more petals.
We begin to glue these elements together. Apply a strip of glue to one of them.
Let's connect this petal to another.
Let's continue gluing them together, and in the end we get a flower.
The flower using the kusudama technique is ready!
Video lesson “Kusudama superball”
The origami technique is becoming more and more popular every day. And this is not surprising. After all, with its help you can create masterpieces from paper. This process is so exciting that it cannot even be put into words. Of course, creating crafts requires a lot of time and materials. But such work brings pleasure, including aesthetic pleasure.
In this master class I will tell you how to make a flower ball out of paper. Plus, I picked detailed photos to every step of the process. With such products it is very original to decorate the interior for a holiday or just for no reason.
It’s very easy to make, the main thing is to prepare necessary materials, namely:
- Corrugated paper in two shades, which is sold in craft stores, or you can use regular napkins;
- A foam or plastic ball as a base.
- Thin wire;
- Scissors;
- Pencil;
- A glass or round cardboard blank;
- Ribbon.
Start making flower balls from corrugated paper from creating flowers. To do this, first fold the paper into several layers in a strip and draw circles on it.
Now carefully cut them out and put them together in at least ten circles and secure them with a clothespin for convenience.
The more layers, the more magnificent the future flower will turn out. Next, in the middle of each group of circles we pierce two holes at a distance of about a centimeter from each other.
We bend the wire into a hairpin shape and push it through the prepared holes.
On the other side we twist it well.
Now we fluff the flower as shown in the picture.
IN foam base First of all, we stick a loop and insert a ribbon into it so that the ball can be hung. Next, we begin to fill the foam base with prepared flowers over the entire area, alternating different shades flowers.
This is how it turns out beautiful balls made from paper with your own hands, which will magically decorate any interior.
Photos taken from the Internet. Unfortunately, it was not possible to determine their author. In any case, thanks to the author for the idea.
Any adult periodically experiences certain skin problems. For treatment of serious skin problems, of course, you need to contact specialized doctors, but we can and should provide daily balanced care ourselves. In this material we will tell you what emollient creams are and how you can use them to moisturize dry skin on the body.
Our dermis requires special attention during the cold period, which also includes the dry heating season. Unfortunately, with age, tightness and unpleasant discomfort can be felt by the skin, regardless of the time of year. And it is very difficult to ignore the signals coming from the largest organ in our body.
Very soon the pre-New Year bustle will begin and for most parents the question will arise of decorating a class or group in kindergarten. We offer you original New Year's craft to school or kindergarten, which you can do together with your child. A paper flower ball craft will be a wonderful classroom decoration or a gift that a child will make with his own hands. At first glance, the craft seems complicated. However, it is very simple to do.
To work you will need: colored paper, glue, pencil, scissors
It’s better to take a glue stick, it glues faster and stronger. Slice colored paper squares with a side of 7 cm. Our ball will consist of 12 flowers, each flower of 5 petals. A total of 60 squares are needed. We made 2 types of flowers. Color combinations you can choose different ones, or you can make plain flowers, for example from white paper, then our ball will look like a fluffy snowflake.
Craft paper ball made of flowers
Fold the square diagonally
Fold the corners of the resulting triangle towards the center. The result was a rhombus, but much smaller in size.
Fold back the top layers of the diamond as shown in the photo. You should end up with a trefoil like this.
Let's fold the corners of the trefoil. Smooth the fold lines well with your fingers.
Now fold the outer petals of the trefoil in half lengthwise
Roll the workpiece, pressing the edges together.
Glue the edges of the workpiece. Press them closer together to seal well. The result is a petal of one flower.
Let's make several of these petals and glue them together.
For one flower we took 5 petals
Shades of petals in one flower can be combined
We begin to glue the flowers together with their petals.
In the end it looks like this bright ball. We pass a colored cord through the center of the ball, having previously coated it with glue. The end of the cord can be decorated with a tassel. Make several of these to decorate your class or group. paper balls from flowers.
Universal choice gift ideas for any occasion and reason. Surprise your friends and loved ones! ;)
DIY paper flowers: simple and clever
There will be a lot of master classes, get ready. Good news for all rose lovers: there will be as many as 4 of them.
Aster
Guys, honestly, I'm not very good at naming colors. So if you see a discrepancy that is obvious to you, write in the comments.
So, first in line is the aster. For it, cut out five circles: two large, two medium and one very small. Fold each circle in half three times, then decorate the edge as in the 4th photo. After unfolding the structure, squeeze each petal to give it volume. Stack all the circles and decorate the middle.
Almost calendula
This flower looks much more like a packaging bow. Prepare a square of paper for him required length and cut the edges according to step 2. You will need several such blanks. Place them one on top of the other and squeeze them in the center, tightening them with wire or thread.
Now the most important thing is to straighten the petals so that you get a beautiful resemblance to a flower. Accordingly, the more layers, the more petals and the more more magnificent flower eventually.
Tip: make several of these flowers different sizes and glue them on the packaging next to each other, then you will get a beautiful resemblance to a bouquet.
Calla
To create calla lilies, you can use either regular double-sided paper or foam rubber (I wrote about what it is in the section about the minion).
For calla lilies, take a stamen (you can crumple it out of paper or make it from polymer clay) and a petal made in the shape of a heart. Place the stamen in the petal, fold the edges of the petal over the stamen, gluing them together. All that remains is to unscrew the edges to get maximum resemblance to a calla lily.
Such flowers are well suited for decorating postcards, packaging, and as an independent gift in the form of a bouquet.
Bell
The master class for the bell is very simple and straightforward. Cut the blank according to the first photo. Glue the edges together and carefully straighten the ends. To make everything look natural, make a center of several elongated stamens, which will need to be glued inside the flower.
By the way, these bells would be great to decorate packaging for March 8th or just a spring birthday.
Lilies of the valley
Well, or something similar. For one flower, take a long rectangle and bend its edge, as in the photo. Cut the wide part so that you get many small strips. Using scissors, twist the strips (to do this, you just need to run the sharp side of the scissors along these strips, lightly pressing the blade against them).
To prevent the flower from falling apart, take a rod and wrap a green stripe around it. Then start carefully twisting the “flower” part, previously coated with glue, on top. Apply the layers tightly so that the greenery does not show through.
But making green leaves is not at all difficult - for them, just fold a rectangle of green paper like an accordion and trim the edges into a triangle. When you unroll, you will get a lot of green leaves ready to be glued to the base.
Poppy
Now we use corrugated paper. Cut out about ten teardrop-shaped petals from it. Stretch the wide part so that the blanks resemble mushrooms.
Take a thin wire and wrap some paper around it - this will be the core. Wind the petals onto this core so that each one slightly overlaps the previous one. When everything is ready, the structure can be pulled together at the bottom so that it does not fall apart.
The master class shows how this flower can be attached to festive cap, but believe me, and on gift box poppy will look great.
Red flower
What is its species? No associations came to mind. But that’s not the point - to create it you will need about ten petals (corrugated paper is used, by the way). Their shape is almost teardrop-shaped. but with a cut end.
Cut from thick cardboard circle-base. Glue all the petals in layers to this circle, slightly crumpling (doubting? God, how right :_D) the bases, thus forming folds - then the flower will be more voluminous and “fluffy”. Decorate the center with some button or bead.
Such a flower, by the way, will look great from soft felt- this way it will gain durability. And if you attach the base for the brooch at the back, you get two in one - a decoration for the gift and the gift itself.
Extravaganza of color
There are only two flowers, but due to bright combinations This produces a very unusual effect. Take the crepe paper again, cut out a circle and fold it into a “doll” shape. Cut a “skirt” for it, which you wrap around the doll. Attach the petals on top, gluing them in a circle. Glue two wide leaves at the base.
The second flower is very simple - cut the fringe and twist it into several layers. The flowers are very simple, they can make a very interesting gift arrangement.
Unseen flower
To prepare the base for this flower, I advise you to look here - here the base for the second Christmas tree is created in exactly the same way. But then the differences begin - each of the corners needs to be wrapped using a thick wire or knitting needle so that it turns out to be a spiral.
You can leave this design alone, but I suggest you connect several (say, three) pieces using the existing spirals - the wow effect is guaranteed. Then you can also experiment - connecting elements with spirals into unprecedented designs.
Advice: going to a party in Japanese style? Then make such a flower very big size and take it with you - it will serve as an excellent decoration for a chandelier.
Peony
“Pio-, pio-, peonies are given by a new acquaintance...” - words from the song of the underground group “My Michelle” (in Lately I listen to it often, it’s inspired by it). We will make from corrugated paper. You will need five sizes of petals, approximately five copies of each ( appearance as in the photo).
Stretch the petals so that you get something like a wave (for both large and small ones). Then form a stamen from the same corrugated paper by folding the paper and further compacting it. You can do this on a wire skewer, or you can do it without it.
Glue the petals onto the finished stamen, each one overlapping the previous one. Do not pull the petal too tightly. In the end, all that remains is to cut the green leaves and stick them around the peony.
4 in 1: dandelion, clove, aster, chamomile
All these wonderful creations of nature are made according to one principle - cutting the edge of a strip from which a flower will be made. The final shape of the flower depends on the cutting shape. Please note that some require a core and others do not.
Please note: despite the very simple design, the flowers turn out very realistic. If you have very little time to make, then this is an ideal option.
Experiment and discover your unprecedented plants - be sure to tell us what happens.
Paper roses
Magic roses are one of my favorite flowers
Rose with twisted edge
The main difficulty here is to carefully twist the edge of the corrugated paper, straightening out the folds. Then make sure that the folds are even. Now twist the strip so that the layers fit tightly together. At the end, secure with thread, trim off the excess.
Simple rose
Need to make a plant in five minutes? Then this rose is definitely for you! Just cut out a circle and draw a spiral in it. Cut out a spiral as in the photo and twist the rose, starting from the longest link of the spiral (the central part will serve as the base).
Big rose
Even gigantic, if you follow these exact dimensions. The heart petals are stretched and placed on top of each other in a circle, secured with glue. Green petals are attached at the end. Of course, the flower doesn’t have to be as big as in the photo – go with your preferences.
Twisted paper rose
Once upon a time I already described this method of creating a rose (here is the second one). The principle is absolutely the same, but the sizes of the triangles resulting from twisting must be the same along the entire length of the ribbon, otherwise the flower will not be very neat.
Once I even made a Rosemary doll, which took part in a city exhibition. Her whole body was covered with roses, made exactly according to this method (the roses were made from ribbons, however).
Clover
I'll just show you how to make the base for the four leaf clover. To do this, take a square of paper and fold it in half lengthwise and in half again. Fold the ends towards the center. Cut out a heart from the resulting design. The result will be exactly what we wanted - a happy flower.
Nameless
No matter how I tried, I couldn’t give a clear name. As a result, the product remained just a beautiful flower, reminiscent of kanzashi motifs ( Japanese art production of jewelry from satin ribbons).
The beginning here is the same as in clover. But after bending the edges, you will need to bend the ends so that the length of the bent part is equal to the length of the visible side in the middle. Then these parts are straightened out and their edges are folded so that the sides are even. They are folded again and glued together to form three stamens. There should be three such petals.
Most of all this a flower will do for decorating a gift in Japanese style.
And again the aster
This time you need to glue the petals along the edge until you reach the desired volume. Decorate the center as you wish or simply fill it with as many petals as possible.
At this point, I declare the big flower review closed. I hope you have found exactly the option that will help you decorate your gift in the best possible way. Before see you soon, subscribe and share with friends!
Sincerely, Anastasia Skoracheva
