Conical Christmas tree made of sisal. Christmas tree made of sisal fabric

When you say the word “Christmas tree” you immediately imagine a forest or a holiday New Year. These are the associations it evokes. And for all the people of the globe, the New Year is coming soon. And the Christmas tree becomes the center of attention and attraction for adults and children. In this article we will show you how to do it different Christmas trees with your own hands using unusual materials.

Make Christmas trees with your own hands, they will be small and tabletop. Place them in every room in your home or give them to loved ones as a gift.

Beautiful and original ideas With step by step masters classes are waiting for you.

DIY Christmas tree ideas

Christmas tree with a star

You will need:

A4 cardboard sheet
Sisal red, green, yellow flowers size 50 x 80 cm
Satin ribbons of red and green colors 1 cm wide = 1 meter each
golden thread
Wrapping paper and pieces of foam measuring 3 x 3 cm
Christmas balls golden color diameter 4 cm = 4 pieces
Beads green, red golden colors diameter 5 mm
Cones = 8 pieces
Artificial rose hips = 6 pieces
Red star
Christmas tree stand
Glue gun
Hot melt adhesive cartridge
Scissors

Operating procedure:

Cut out a template from cardboard and roll it into a cone, secure with glue.

2. Cut 8 cm squares from sisal. Roll them into balls.

3. From wrapping paper cut out a square, wrap foam in it, secure and tie with gold thread.

4. Starting from the bottom of the cone, alternately glue sisal balls, gifts, pine cones and rose hips.

5. Glue colorful beads.

6. Glue bows from green and red satin ribbons.

7. Attach a star to the top of the Christmas tree and place it on a stand. The star on the Christmas tree is ready with your own hands and looks like this.

Sisal balls in a Christmas tree outline

You will need:

Whatman
Brown and sisal milky
Beads on a fishing line
Styrofoam berries
Plaster plant pots
Paint - golden spray
Nuts, cones, acorns
Glue gun
satin tape
Plaster container
Scissors

Operating procedure:

Paint the pine cones, acorns, and nuts with golden paint. Eat good paint Deco Lack. It is advisable to remove the kernels from the nuts and then glue the shells back together.

2. Tear off some sisal and begin to twist the fiber inward. Do this until a small tail remains in your hand.

3. Roll the sisal tail into a ball.

4 - 5. Make balls of milky and brown sisal.

6. Twist a cone from a sheet of whatman paper size A3, cut it evenly. Please note that its bottom should fit freely onto the flowerpot.

7. To give the Christmas tree more density, you can twist another sheet of whatman paper and place it on the base. Cut off excess corners with scissors. Glue sesal balls and acorns onto the cone. nuts and cones. Try to arrange objects so as to alternate colors. Remember, you are doing it with your own hands and you should be in a good mood.

Check how you made the bottom of the Christmas tree: place it on a flat surface and step back a couple of steps. If the top of the cone points straight up, everything is fine. If not, cut off the side of the cone that is opposite to the side of the slope. The cone should be level on the table.

8. Please note: the bottom of the cone must be very carefully closed so that the Whatman paper is not visible.

9. Tie bows and glue them to the Christmas tree.

10. Glue gold elements - a heart and stars - into the spaces between the sisal balls.

11. Glue milky candied berries and gold-plated foam balls into the remaining voids. Try to place as many berries as possible and leave space between them.

12. Glue the beads in a circle, starting from the top.

13. Dilute the plaster in a plastic container and pour it into the flowerpot. Let it dry.

14. Apply glue to the edge of the flowerpot and glue the top of the Christmas tree to it. Also apply glue to the sisal balls, glue them to the planter and press firmly.

Christmas tree I made it with my own hands and it looks great.

Christmas tree made of vines

You will need:

Tree branches ( wild grapes) and long sticks
Cones
Dried flowers
Star anise, nuts, acorns, cinnamon
Leg-split
Beads
Glue gun
Clothespins (you don't have to use them)

Operating procedure:

1 -1a. Braid a wreath - this will be the base of the tree. To do this, squeeze the vine with your left hand so that a circle is formed, and right hand wrap it with the rest of the branch.

2. Insert 6 long sticks into the wreath. They must be tough. Secure the top with twine - this is the frame of the tree.

Tip: Make sure the base of the tree is strong enough to accommodate sticks. This means you did everything right and you can move on.

3. Push the flexible branches through the hard ones.

Tip: It is advisable to weave a Christmas tree from freshly plucked branches. If you can't find fresh ones, soak old branches in a bath for a couple of hours. They will absorb water, become soft and it will be convenient for you to weave a cone.

4. Braid the Christmas tree to the top.

5. Attach the vertical sticks to the bottom of the tree using glue.

6. Glue cones, acorns, cinnamon, star anise, dried flowers, and vine balls to the tree.

7. Wrap the top of the Christmas tree with twine.

8. Now glue beads, twine bows and clothespins to the Christmas tree (you don’t have to use clothespins). Make the crown as in the photo.

You can show your imagination and decorate the Christmas tree with birds.

9. Insert a garland into the cone, secure with wire and light the lights. Your DIY Christmas tree made from vines is ready. Before you is a modern current decor rooms made of natural materials and an original lamp.

At the end of the article, you are provided with examples of similar Christmas trees that can be bought in a retail chain, but they cost several thousand rubles. Compare them and you will understand that Christmas trees made by yourself are no worse, and even better, since they contain the warmth of human hands and your pride - you are a creator.

Sisal Christmas trees have become quite popular New Year's decorations homes and gifts for relatives and friends. And, I must say, not in vain - these trees look very stylish, cute and festive, but celebration atmosphere- the most important thing in the holiday.

So, let's figure out how to make such a Christmas tree using a master class on making a Christmas tree from sisal.

Sisal Christmas tree: master class

Making a Christmas tree from sisal with your own hands is very simple - you just need a little skill and imagination to create this festive decorative element. And, of course, you must follow the instructions, because instructions are everything to us.

First, let's look at what you'll need:

whatman;
sisal;
gouache to match sisal;
wire;
a plastic cup;
plaster or sponge;
Chinese chopsticks;
glue;
decorations for the Christmas tree: bows, beads, etc.

Now let’s move on directly to making a Christmas tree from sisal with our own hands.

Step 1: To begin, take whatman paper (take the size that suits you) and paint it with gouache to match the sisal of your choice. Sometimes sisal is thick, and sometimes quite thin, and, accordingly, transparent, so in order not to wrap the sisal in a dozen layers, it is better to paint the base in the same tone as the sisal. In this case, even if the base is slightly translucent, it will not be noticeable. Let the paint dry thoroughly before continuing.

Step 2: Next, you prepare the base for your Christmas tree - roll the painted Whatman paper into a cone, you can secure the cone with glue (namely glue, not tape). After this, thread a wire through the top hole of the resulting cone and secure it - this will be the top of your Christmas tree. Now wrap the Christmas tree in sisal. To make the sisal more pliable, you can lightly crush it in your hands.

Step 3: Now let's take a little break from the Christmas tree - you also need to make a stand for the Christmas tree in which it will stand. To do this you will need a plastic cup and Chinese chopsticks. It is better to take several Chinese chopsticks and connect them together, wrapping them with paper or tape. Pour plaster into a glass and secure the sticks in it, which will stick out from the glass like a trunk for a future Christmas tree. You can also use a sponge instead of plaster, but plaster will undoubtedly hold everything in place much better.

Step 4: Now decorate your Christmas tree as you wish. First, you can wrap it with ribbons, which will serve as something like a garland, and then add bows, beads and other tinsel that suits your taste. After this, all you have to do is secure the Christmas tree in a “pot”, which can and should also be decorated with all sorts of bows and ribbons. Secure the barrel from Chinese chopsticks You can make a Christmas tree in a cone by filling this cone with napkins. The bottom can be secured with glue. The Christmas tree is ready for the holiday!

On the eve of the New Year, we all try to cook for our loved ones and friends. original souvenirs. Great solution this problem will be the production DIY sisal fiber Christmas trees.

Sisal is very interesting and unusual material, products made from it have a particularly festive and elegant look.

Nowadays, craft stores sell sisal fiber in various color variations, which is very actively used by needlewomen.

Christmas tree made of sisal It can be of absolutely any color, it all depends on your desire and imagination.

To do sisal Christmas tree You will need:

cone made of cardboard, polystyrene foam or floral foam,
sisal (quantity depends on the size of the Christmas tree - 25-50 g.),
threads in the color of sisal,
double sided tape,
some medium strength wire,
ribbons 2.5 and 1 cm wide (I have: brocade ribbon 2.5 cm, fabric ribbon -1 cm),
plastic cup, jar, flower pot (any suitable container),
building plaster (alabaster),
3 kebab skewers,
a small piece of cardboard,
for the crown: an asterisk, a bell or a small ball,
for decoration: a string of beads or snowflakes, decorative twigs, cones and any other suitable decorations,
scissors,
hot glue gun.

We dilute building plaster with cool water until it becomes thick sour cream. Pour into a small, pre-prepared glass, jar or pot, filling about halfway. Immediately, before the plaster has hardened, insert the trunk into the center (in my case: 3 kebab skewers glued together), hold it so that it does not fall while the plaster sets.

We attach 2-3 wires to the cone (one is slightly longer), secure with hot glue. Let's make a small loop at the end of a long wire for the crown. Next, we wrap the entire Christmas tree with double-sided tape.

We spread the sisal evenly over the entire length of the Christmas tree and try to roll it tightly to cover the entire cone and crown.

We wrap the cone and crown a little with threads in the color of sisal to secure the individual fibers.

Now we need to close the bottom of the Christmas tree. To do this, cut out a circle from cardboard according to the diameter of the cone. We immediately make a hole in the circle, for example, using scissors.

You can use ribbon to decorate the trunk of our Christmas tree a little.

We install the cone itself on top, to which we glue a circle from below.

We decorate the bottom of the Christmas tree with a small “skirt” of ribbons of different widths. You can also attach a bell.

Now the most interesting part remains, the decor of the Christmas tree and pot.

The pot can be decorated with artificial spruce branches, cones or any other decorations. We fix everything with hot glue.

I also decided to kill two birds with one stone: smooth out the protruding single fibers of sisal and add shimmer to the Christmas tree. Glue a string of snowflakes or beads with hot glue around the cone in a spiral. Decorate the bell with a small bow.

Like this sisal fiber tree I got it.

Another identical Christmas tree.

Imagine!

Christmas tree made of white sisal…

Sisal coffee tree with star anise flowers and coffee beans...

Christmas tree in a children's room for girls.

Money tree made of sisal and coins.

Christmas trees made of sisal.

As you can see, everything is not so complicated. Be sure to try to create an original one DIY sisal Christmas tree.

I was glad to help!

Sisal is a natural plant fiber. It's being mined mechanically from the long leaves of the agave plant, which grows in the subtropics. Since ancient times, residents of America and Africa have valued it for its durability and strength. Sisal is used to make threads, ropes, ropes, and create a variety of household items. Mattress padding and carpets are renowned for their quality. Ship ropes were woven from thick threads. However, natural fibers are gradually being replaced by artificial ones.

Handicraft masters use both threads and fabrics made from them in their creative works. In this article we will look at a master class on a sisal Christmas tree, different variants execution. Readers will also learn how to create canvases and balls from threads on their own, and even use natural and undyed rope. Nowadays it is fashionable to decorate the interior with jute crafts and burlap, and here we use sisal. The color of the threads is lighter than jute ones, stronger and harder to the touch, you also need to know that they are prickly.

Some people use artificial sisal. However, these are just thin plastic threads. In our article we will describe a master class on a Christmas tree made from natural sisal, grown by the hands of workers in Brazil and Tanzania. The craft you make will delight you a long period time. After all, this material is durable and does not absorb dust and moisture. So you can make the version of the New Year's craft presented below as a gift.

Christmas tree made of threads

To make a Christmas tree from sisal with your own hands according to the master class described below in the article, you need to buy the following materials necessary for the work at a sewing accessories and handicraft store:

foam cone;
green sisal threads;
golden ribbon;
gold and red beads or half beads;
red satin ribbon for the bow at the top.

You will also need scissors, PVA glue and Christmas tree garland, it is advisable to buy a lightweight plastic one.

Master class on sisal Christmas trees

Apply a thick layer of PVA to the foam cone with a brush. The winding of sisal threads begins from the bottom up. They do this in a chaotic manner, the main thing is that the coating is of high quality and the foam is not visible anywhere. At the very top, the threads are wound tightly around some kind of rod, for example, take thin knitting needle, which can be easily removed later. Top part the craft is made tight, and after removing the rod it is twisted a couple more times around its axis. To prevent the top from falling apart, add PVA glue.

The winding is secured with ribbons tied in a spiral around the Christmas tree. You can alternate a strip of golden ribbon and a garland with balls. The top requires reinforced winding to prevent it from unwinding. A small bright ball, secured with threads, is hung on the edge. The top thus tilts to one side. You can decorate the Christmas tree to your taste by attaching bright beads or pebbles along the ribbon. You can glue several balls, placing them evenly over the entire surface of the craft. Tie a red bow next to the top ball.

A sisal Christmas tree made according to our master class can be placed either on a shelf or in the center festive table. It takes up little space, but will serve as an excellent decoration for the New Year's holiday.

Christmas tree made from individual balls

Now we will present to the reader a master class on a Christmas tree made from sisal balls. You can use your imagination in making this craft in different ways. Both the colors of the threads and the size of the twisted elements themselves vary. Additionally, both natural and artificial components can be included in the work of decorating crafts.

Cones and twigs are used Christmas balls and tinsel, foam fruits and berries. Dried fruits look beautiful, for example, orange or lemon slices, cinnamon sticks or star anise. Sisal balls alternate with yarn pom-poms. Here everything is decided by the master working on the craft.

How to make balls

Before starting the sisal Christmas tree master class, let's look at how to make balls correctly, because the threads have an unruly structure and can stick out unattractively in different sides, they will definitely come apart after twisting. Before forming balls on a foam cone, craftsmen prepare them correctly.

First of all, a small part is torn off from the general pile of fibers and rolled into a ball shape in your hands. the right size. If it turns out small, it’s okay, you need to tear off a little more and roll the ball in your palms again. Then the element must be strengthened. The same PVA glue is used. Pour a little into the palm and roll the ball in the glue again. The finished part is left for ceramic plate until completely dry.

When everything has dried, you can notice small imperfections, for example, threads sticking out here and there. This needs to be corrected before pasting the cone, cutting off all excess with scissors. Next begins assembling the components together.

Assembling a Christmas tree from balls

As a base, you can use either a purchased cone or one you make yourself from cardboard. Let's consider this version of a sisal Christmas tree (read the master class with a step-by-step explanation below). Thick green paper is selected and rolled into a cone around the top corner. The sides can be glued together, but it is more reliable to fasten them with paper clips using a stapler. The inner part for weighting is filled with crumpled newspapers.

The lower part of the cone is leveled with scissors and placed on a piece of foam or glued to a saucer from a flower pot. Only it must first be painted or covered with ribbons of green or contrasting color.

Then the prepared balls are pasted over the entire cone and added decorative elements- bows, cones, Christmas decorations, artificial snowflakes and much more.

How to make a Christmas tree topiary from sisal

You have already read the master class on working with sisal fibers. Let's figure out how to do it New Year's craft Christmas trees made of sisal ropes, and even in the form of topiary. It is best to use a foam cone as the base for the tree. A hole for the rod is pierced from below with a stick or branch. Also prepare a skein of natural thin sisal rope, flower pot or any form of container to hold our tree in vertical position. We will fix the base with a solution of gypsum and water, mixed in a separate bowl until it becomes thick sour cream.

To make the tops as curved as in the photo above, thick wire is used. The first step is to wrap the cone with rope or thick threads of sisal around the entire circumference. The wire is stuck deep into the cone (you can pour a little PVA into the hole), and also wrapped along the entire length.

The rod (stick, thick even branch, wire) is wrapped in brown satin ribbon, the ends of which are glued to the rod from below and above. A hole of the appropriate diameter is pierced in the cone and a rod is placed on the glue. Its lower part is inserted into a pot filled with gypsum solution.

Decorating crafts

The decoration uses natural elements - paper ribbons, dried leaves, cinnamon sticks and lemon slices. The pot is wrapped in bright glossy paper and sisal thread. The remaining free inner part is filled with sweets.

The article gives only a few options for making Christmas trees from sisal. You can diversify crafts in your own way by adding creative ideas to the knowledge gained.

Good day, friends!

Soon, soon New Year!
He's in a hurry, he's coming!
Knock on our doors:
“Children, hello, I’m coming to see you!”
We are celebrating the holiday
Decorating the Christmas tree
Hanging toys
Balloons, crackers...

This is how I decided to start today’s post in an unusual way. Which will be dedicated to making them at home. After all, we all traditionally love to give them for the New Year. Namely, I suggest making a Christmas tree from what you have on hand. It can be anything, for example, paper, cotton pads, dry twigs, etc. After all, we all dream of surprising our loved ones with something special and unique. Therefore, if you are still thinking about what to give to mom, dad, etc. then you have a ready-made solution).

Of course, every home on New Year's Day has a brightly decorated living “forest beauty” that flickers and blinks with multi-colored lights. I suggest making a “little friend” so that she doesn’t get bored. And behind one, your decor in the rooms will be transformed, or perhaps you will place it on the holiday table.

Besides this creative work will deliver a lot positive emotions, and will delight the children. Moreover, the winter evenings are long, and you can afford to create something beautiful and green).

Although it doesn’t have to be exactly this color, white is also in fashion. The tree will look as if it is covered in snow or frost.

I’ll start with perhaps the most grandiose and magical tree in my opinion. I suggest you look and study these instructions in order to create such a funny and cheerful beauty for yourself or someone else as a souvenir. The work is made of sisal, who does not know this coarse fiber of a tropical plant.

On a note. A special feature of this craft is the presence of funny legs instead of a stand. And if you remove them, you will get topiary, which can be made of any material, for example coffee beans or thread.

Well, take action by looking at these pictures and detailed descriptions.

We will need:

green sisal – 25 g
Kinder Surprise cases
heat gun
Styrofoam
wire
green pencil - 2 pcs.
colored paper
green threads
decorative braid
any decorations such as balls, beads, etc.
cardboard

Stages:

1. Take the Kinder case and cut off the lid. For the small part, cut off a small section on one side with a semi-oval, so that you can glue it together later.

2. Using a glue gun, glue the two parts together. This is how the boot will turn out, top top.

3. You should end up with two identical shoes. Make a hole in the largest bottle opener. Have you guessed what it is needed for?

4. Now let’s decorate the shoes. To do this, take a red sheet and cut out two strips 19 cm long and 2 cm wide.

5. Glue the most long strip, wrapping it completely around the shoe and giving it the desired shape.

6. Then glue decorative tape along the entire diameter of the sole for a beautiful appearance.

7. Then take your pencils.

8. Poke them into the prepared holes, and add a little glue so that they hold tightly. The legs are almost ready.

9. All that remains is to decorate them with tinsel, do as shown in this photo below.

11. This is what should come out. What does it remind you of already?

12. Now take the wire and insert it into the tip of the cone. Wrap it in sisal too and tie it with thread.

13. The next step is to make a skirt for the stomper. To do this you need to make pounds. Make rectangles of fabric measuring 10 cm x 9 cm, their number should be from 60-80 pieces. depending on the fullness of the skirt.

14. Then start gluing with a hot-melt gun. In this order. Bend the rectangle in half, but along an oblique line. Secure with glue.

16. Then lift the right edge and glue it together.

17. The funnel is ready. It's really a funny name, even a little funny.

18. Then start assembling the Christmas tree. Glue the blanks in a circle.

19. To create a skirt later.

20. Insert the legs into the base.

21. Then use your imagination and get creative, glue on various kinds of decorations.

22. Glue a bow with beads to the top of the spruce and wrap it around the craft.

23. There will also be snowflakes and rhinestones here. Place the resulting masterpiece on a stand. Good luck.

How to make a voluminous Christmas tree out of paper at home

I think that many have ever thought about this question. After all, schools and kindergartens often give assignments on this topic. I suggest making, for example, a silhouette Christmas tree. To do this, take this sample and print it on office colored sheets.

Afterwards, cut out with a stationery knife and glue the blanks together. Use special clamps for this.

You can make a whole forest of such colorful coniferous beauties.

The following work will be completed in 5 minutes. Don't believe me? It couldn’t be simpler; you will need circles of colored double-sided paper and a pencil on a stand. The diameter of the blanks you see below:

1. Fold the circle in half with your hands, so that you get a semicircle.

Do exactly that! Carefully iron the fold with your hands.

2. Now fold the semicircle in half again.

4. And in the same way two more times.

6. And this is what happens. Carefully trim the ends of each piece with scissors.

7. Start assembling the product. Place all the blanks on a stick. From the largest circle to the smallest.

8. The only thing missing is a star or Santa Claus.

I especially found a video for you so that if you need it, you can, in addition to everything else, roll up a grandfather out of paper. A new article will be released soon, in which you will find many works with this hero, but for now, watch the story.

For those who found the first option quite easy and simple, you can take and fold a Christmas tree in origami style; for instructions and description, see below in this film.

Christmas tree made of beads for beginners (diagram inside)

The next creation of nature is wow, cool and at the same time elegant. And such a souvenir will last for more than a dozen years. This is a spruce made of beads. I thought it was impossible to make such a tree myself. But as it turns out, I was wrong. I am sure you will cope with such work with a bang.

We will need:

green beads – 7 shades
white beads or transparent
plate from under the flowerpot
acrylic paint: white and brown
wire 0.4 mm
PVA glue
ruler
rod 4 mm and length 2 cm
tape
alabaster

1. Place the beads in a cup and mix all the colors. Place beads on the wire in different color sequences and measure 2.5 cm using a ruler. At the same time, leave the edge in the region of 5-7 cm without beads.

2. Make a loop for four circular turns.

3. From the loop, step back 2 cm of wire free and without beads of wire and again count 2.5 cm and make a loop.

4. For the smallest branch, wind 7 loops in this way. Then find the middle and fold it in half and twist the elements together.

5. Thus, you should have this number of branches.

7. Now take the rod and wrap the tape, and then 4 branches with 7 loops to it. The first one is in the center, and the rest are placed below in a circle, twist the stick and wrap it with tape.

6. Next, take 6 branches of 9 loops each. Wrap them in a circle in two tiers of three branches, wind them in a circle. Then step back down about 7 mm and take 5 branches of 11 loops each and wind them in one tier.

7. Retract 7 mm again and wind 6 branches of 11 loops each and again divide them into two tiers. And so on. The final stage is 5 branches of 7 loops.

Rewind the remaining barrel with brown tape. Spread the branches to make the tree lush.

8. Bend the table at 90 degrees and place it in a cup from under the flowerpot. Pour alabaster solution into it and let it dry.

9. Wait until the tree sets; you can also plant any symbol of the New Year. For example, a pig or a rat.

Make a thick solution of PVA glue and alabaster, dip it in a kitchen napkin and glue it to the trunk. To get a natural look.

10. After complete hardening, start painting, but first remove the product from the cup. Paint the trunk brown paint, and the platform is white.

11. Decorate with large beads in the form of toys or something else.

Now a few more instructions that I found on the Internet.

But this model is somewhat similar to the first one, maybe someone will like this one more.

And look how lovely it is.

Well, in conclusion, I would like to show one more example of a flat spruce tree, which you can use as a pendant or keychain.

Kanzashi style Christmas tree made of satin ribbon

Well, friends have now reached one more elegant option, which looks quite bright and elegant. The green beauty turns out beautiful and lush. But first, you must master the kanzashi technique; for this you need to learn how to make special blanks in the form of triangles. Take a look at the diagram, if it is not clear, you will find more detailed master class for making such things.

You have to take a green satin ribbon, cut it into pieces measuring 5 cm x 5 cm and repeat all these steps.

Or consider this tip.

Thus you will need:

cone made of thick paper or cardboard
satin tape
star
scissors
wire
candle
heat gun

Stages:

1. Prepare everything you need for work. Place the gun to warm up.

2. Carefully and slowly glue the fabric blanks to the surface of the green cone in a circle and in a spiral.

3. Try to place all the triangles fairly close to each other. After the product is ready, take a star or any bow and glue it to the wire.

4. Place the ornament on the top of the tree. Decorate the souvenir with beads; they will act as a garland.

I came across a more simplified version of the craft in this film, perhaps you will also like it and you and your children will master this technique. Good luck!

Spruce made from cotton pads: a craft for kindergarten children

Now let's get acquainted with a fairly simple craft that you can easily do with your child at home or in a kindergarten class. This option is so lightweight that it is suitable for any junior group or older.

For creativity, you will need to decorate cotton pads with green gouache. Let them dry completely. Then roll it into a petal and secure it with glue.

Since a Christmas tree is usually made for the New Year, let’s glue the snowdrifts on the blue background sheet first of all. And then arrange and glue the green blanks in the desired sequence in descending order.

You can also get creative and build a snowman or other character. Give free rein to your imagination and the souvenir or postcard will be ready.

It is with these triangular blanks that you can build other options.

The next option, for which you will need the materials you see in this picture. Make a bag out of cardboard, glue the parts with double-sided tape, and make the bottom even.

And then dilute the blue gouache in some water and dip it in it cotton swab. Draw dots along the outline of the disks.

Then glue the round pieces onto the cone, overlapping one on top of the other.

Then decorate the craft to your taste. Winter beauty is ready. What do you think of the idea? The truth is super and fast and cool!

You can go another way: fold each disc in half three times and fasten it with a stapler. Then glue these triangles onto the white cone. And then decorate the Christmas tree with beads and a star.

Or you can also go the other way, do volumetric craft, cutting cotton pad into four equal parts. See it all for yourself below:

The youngest assistants can be asked to do this kind of work.

Forest beauty made of spruce and pine cones

Of course not one New Year's celebration Can't do without tangerines and of course pine cones. So why not use that too. After all, such natural material It’s easy to collect in a forest or park, and then sit down and make it.

We will need:

gun
scissors
cardboard
bumps
varnish in a can

Stages:

1. Make a cone from a sheet of A4 paper and glue the ends together. Let me remind you how to do this. Draw a circle, and then cut it in half, coat the walls with glue and let dry.

2. After starting to assemble the product, glue the cones to the workpiece in a spiral. So until the product takes on a finished look.

3. Cover shiny varnish for durability.

4. Cut out a star from a shiny lid or any other material.

5. Decorate the top with it.

You can go another way and make such a forest charm from husks. Also glue a cone out of paper.

And it is on it that, using a glue gun, glue the particles in a spiral, one after another.

For completeness, decorate with beads or other decorations that are typical for this holiday. For example, tinsel and stars.

Christmas tree made from candies (step by step instructions)

Do you like sweets? Oh, and I just love them. I propose to lay out the symbol of the New Year from them, and take a bottle of champagne as the base.

1. Glue the green fluffy tinsel onto the champagne in a spiral using a glue gun.

2. As soon as the first row of tinsel is glued, glue the candy wrappers (tips) at the same distance.

3. And then add something else, for example a bow.

4. Well, how do you like this wonderful idea? Cool, congratulations to the author! It’s not a shame to go on a visit with such a souvenir).

DIY sisal Christmas tree

Preparations for the New Year are in full swing, so let's do something interesting from such material as coarse fiber. Nowadays it is often used because it is not very expensive, and everyone wants to create with it.

We will need:

sisal fiber green and white
filler
bamboo stick
plastic cup
cardboard
satin tape
scissors
decorative elements: bows

1. Fold a cone from a sheet of cardboard and glue it together. Place the filler in it and insert the stick. The wand will need to be decorated with a satin ribbon. Secure the ends of the tape with glue.

2. Also add filler to the glass and put something heavy on the bottom, such as coins. Use corrugated paper or other material to decorate the glass; it will act as a stand. You can also put a piece of foam rubber on top, for strength, and make a hole in it for the stick.

Insert the prepared cone on a stick into the stand.

3. Roll the sisal into balls by hand.

4. Glue them to the workpiece in different combinations, I mean color. Alternate at your discretion.

5. Now dress up the beauty and sprinkle a little glitter polish. All that remains is to admire or give this masterpiece to someone.

Video on how to make a decorative Christmas tree from threads and PVA glue

And one more little beauty that will fit very well into any interior or become a great gift what a miracle made of threads. Watch this story and follow all the steps from the author.

I decided to prescribe the next option for you, please read.

We will need:

PVA glue
threads
foil tape
disposable cup
cardboard or old box
plastic bag
battery operated candle

Stages:

1. Form a cone out of cardboard and glue it with foil tape. Dry. Then put it on geometric figure bag, secure it even inside, otherwise it will fidget around the workpiece.

2. Place the threads in PVA glue diluted with water (50 to 50). But before that, make a hole in the cup right at the base and thread a thread into it.

3. Fill the cup with glue solution so that the entire thread is covered in glue.

4. Now start winding the thread around the cone in a spiral.

Important! The thread should not be too tight; it should lie easily on the surface of the cone.

3. So in the end you will get new souvenir, cut the thread. Leave to dry.

4. After drying, remove the Christmas tree from the workpiece; the PVA will dry and become transparent.

5. Decorate the gift with sequins and then turn on the battery-powered candle and place it in the very base.

6. The Christmas tree will twinkle and act as a mini-lamp or garland.

Craft for the school competition “Tinsel tree for New Year 2019”

Now let's move on and execute the symbol next year using ordinary tinsel. Still, such material is also an indispensable attribute. Do you agree? Plus it looks really beautiful and charming. Take a look for yourself.

We will need:

tinsel of different colors
cardboard - 2 pcs.
glass or pot
foil sleeve
glue gun and PVA glue
scissors
thread with needle
wire
any decorations, lace fabric, bell, balls, etc.

1. Make a cone out of cardboard, take it green.

2. Then cut out a circle from another sheet, 1.5-2 cm larger than the diameter of the geometric figure.

3. Then make these slits on it.

4. On a round piece, trace a sleeve in the middle so that you can cut a suitable hole.

5. Glue the circle to the cone. This is what will happen in the end.

6.Wrap the sleeve with decorative tape and insert it into a cup of plaster.

7. Make a skirt out of lace, assemble it with a needle and thread to make it airy and fluffy.

8. Glue in two tiers to the green blank. Cut the tip of the cone and insert a wire with a bell into it.

9. Now take a glue gun and use it to fix the tinsel in a spiral.

10. Then glue on balloons and other decorations such as beads. Yours magical miracle ready. Create for your health!

Video tutorial on making a New Year's tree from foamiran

If you want something unusual, then I am glad to present you with another little green joy. It will be needle-shaped, and the material will be foamiran. It is quite unpretentious, easy to work with and the most important advantage is that it does not crumble. So, go for it.

Don't forget to use for decoration artificial snow, which will give the spruce unprecedented beauty and brightness.

Vintage corrugated paper Christmas tree

Now there is one more craft that you can also take and perform at the exhibition in kindergarten or school. The technique will be trimming. Are you familiar with this method? I hope it's very good. And if not, then you will find out now. For work you will need corrugated paper, PVA glue, scissors, and a cardboard cone. And of course, a good mood.

1. So, take a cone to work with. This is what we will be processing now.

2. But before you do this, cut the corrugated squares: 1 cm x 1 cm, 2.5 cm x 2.5 cm, 3 cm x 3 cm, 4 cm x 4 cm, 5 cm x 5 cm, 6 cm x 6 cm.

You can replace corrugated paper with regular paper napkins.

3. Take a small square and wrap it around a stick, then dip it in glue and glue it onto the cone.

4. In this way, fill the entire geometric figure and move in a circle.

5. Take the smallest squares first, then larger and larger ones.

6. You can also make a star out of paper on the top of your head. Or take it already ready-made option from the shop.

This is the kind of wonderful green souvenir you should end up with. Don't forget to decorate with any beads or rhinestones.

Creative spruce made from plastic bottles

I think that in any home there is plastic bottle. Take it light green in color. The steps are quite simple, do it with your children to occupy your family leisure time.

Stages:

1. Cut out the middle of the bottles, and then cut it into pieces.

2. You should end up with rectangles like this. From which the branches for the Christmas tree will be made. Their sizes are:

8.5 cm x 6 cm – 6 pcs.
7 cm x 6 cm – 6 pcs.
6.5 cm x 6cm - 5 pcs.
6 cm x 6 cm – 5 pcs.
5.5 cm x 6 cm - 4 pcs.
5 cm x 6 cm – 4 pcs.
4.5 cm x 5 cm - 3 pcs.
4 cm x 5 cm – 3 pcs.
3 cm x 3 cm - 3 pcs.

3. Round each rectangle, bend the tip, and cut after the edge, as shown below.

4. For curl, scorch the fringe with a candle.

5. And then color the fringes acrylic paint or nail polish. Pollinate with glitter.

6. Thus, you should make this number of branches, and make a hole on each branch.

7. Then take a stick and stick it into bottom part bottles. This will be a stand for a souvenir. Make the hole using a drill.

8. Well, now all that remains is to assemble the Christmas tree, thread the branches onto the stick.

9. Looks chic and attractive.

10. Decorate with a bow and beads. Give such a masterpiece to your friends or keep it for yourself. New Year's table. Product height 20-25 cm. Cool!

Christmas tree for New Year 2019 from scrap materials (100 ideas)

The time for miracles has come, and so let's get your apartment today. Which each of you can create yourself. For example, you can use this idea and decorate the walls in any room. Such a nice craft will lift everyone's spirits. You can make such a drawing in a school classroom or even a hall kindergarten. In principle, anywhere, even in the office.

Such hanging Christmas trees look elegant, and they can be made from anything, as in these pictures. These could be chopsticks or even utensils, take a look:

Or decorate the figure with any lamps or New Year's garlands.

A souvenir with your photos and images on it looks cool.

And also perform illumination. Wow, it's especially breathtaking dark time days when it is already evening or night.

You can add spruce branches or use them to do the work.

You can also create an elegant composition even from ordinary sheets of magazines.

From ordinary leaves for notes you can also make a craft in the form of a Christmas tree, both three-dimensional and for the door.

It has now become fashionable to make compositions on doors or walls. Here's an example from old book pages:

But even in stores they make such wonderful decorations from the books themselves.

Again, depending on where you work, if it’s a clothing and shoe store, then you can disguise the mannequin like this.

Besides everything, you can also take from waste materials ordinary wine corks and voila, a new masterpiece.

Or use the simplest idea - draw a Christmas tree.

Or do the desired figure according to the template.

Well, if you are a very creative person, you can even do the work from machine tires or plywood.

If you work in a hospital or your specialty is related to medicine. Then you can put it this way:

And from ordinary wooden blocks it is also possible to create something beautiful, as shown in this picture.

You can also turn an ordinary stepladder into something very cool, take a look, what does it remind you of?

They even make Christmas trees out of plastic or paper pipes.

And here is another souvenir made from disposable plates.

Or line it with fabric and modern glass marbles.

Or use bows.

For those who are interested in needlework (for example, you can take foamiran or felt) or knitting:

From New Year's toys They also lay out such cool little things hanging in a suspended state that resemble a forest beauty.

This is where the wire was used.

And here they made a cardboard frame.

From regular napkins and newspapers also make crafts.

Or use scrapbooking paper.

Once I even saw a gorgeous creation made from egg cups.

You can also create a masterpiece out of pillows.

The most original crafts You can designate these ones, from bottles.

Here’s another idea from jelly jars or take any containers.

With the kids you can easily make a Christmas tree out of plasticine.

By the way, you can create sweet masterpieces that are also edible. You will need waffle cones and cream.

And here is another beauty, which is made of sweets or cookies.

From fruits and berries you can create unusual souvenirs. I think that children will not resist such beauty and will immediately want to try it on their tongue.

Here's another pasta idea.

And you won’t even believe it, they create products from disposable spoons and forks.

Here is another work made from wool balls and buttons in the shape of a cone.

And here, look, shells were used.

This masterpiece looks quite unusual; it is made of feathers.

Or from a material such as flower mesh or sisal.

Here are a couple more ideas.

That's it, friends, that's all I have. The post turned out to be quite long, but I hope that you found what you were looking for. Create something amazing yourself or with your children. decorative Christmas trees and be happy. After all, such a souvenir always exists and will be the main attribute of the New Year.

I wish that all your dreams and expectations come true in the near future. Good luck everyone and have a great day! Bye.