How to clean a fur coat collar at home. How to clean blue mink at home

Often, many women who have mink fur products do not know how to clean it. But sooner or later everyone, without exception, has to face this issue.

Mink fur is considered one of the best in the world both in terms of the quality and characteristics of the fur, and its beautiful shade. Any girl in a mink will look like a real queen, and the fur, which is pleasant to the touch, warms well.

Any clothing can get dirty, and mink fur is no exception. Because of its color, even a small speck will clearly appear on the mink, it will spoil the overall picture. Therefore, such fur should also be cleaned from time to time, and preferably regularly. The best way out of this situation is to apply for professional help, that is, to the dry cleaner. You can be sure that your mink will come out like new, but this solution to this problem also has significant disadvantages. Over time due to dry cleaning the structure of the fur begins to break down and deteriorate, so dry cleaning is more of a last resort. Experts have calculated that mink fur can withstand no more than 6 dry cleaners. So try to use gentler cleaning methods, and not too often!

Here are some examples possible methods cleanings that will not harm the fur:

Alcohol is diluted in water in a ratio of 1:2, a cotton swab is moistened in this solution and the fur is cleaned. It is necessary to clean against the lint, after finishing cleaning, blot the fur with a towel, then knock it out and dry it well.

Make a solution of salt and alcohol. Mix 5 g of salt and alcohol in half a liter of water, then use soft sponge Apply the solution to the mink fur and brush it with a soft bristle brush in the direction of fur growth.

The canteen also copes well with this task. It is mixed in equal parts with medical alcohol, and then the fur is cleaned with this solution. After such cleaning, the fur will shine like new!

Fur can also be cleaned well using potato starch, it is poured onto the dirty area and after some time the fur is shaken out well.

You can sprinkle semolina on the contaminated area; it will absorb all the dirt. The fur is shaken out and cleaned well with a brush.

To remove the yellowness that appears, you should make the following solution. Mix in one glass of water ammonia(a few drops) and hydrogen peroxide (1 tsp). Spray the yellowed area with the prepared solution, and then wipe the fur with damp cotton wool.

If you use detergents or shampoos for cleaning, you should give preference to those that have a neutral reaction. And after cleaning, be sure to wipe the fur with a damp cotton swab.

With these tips, you can clean blue mink fur yourself and keep it in good condition. But of course, it is better to avoid possible contamination, but you should not worry too much about this. After all, this fur is quite resistant to various factors, including pollution, and this is largely due to its popularity. Just make it a rule to regularly care for your fur and take it to the dry cleaner once every two years.

It happens that the jacket still looks quite decent after washing, but the edge is clearly not the first freshness. And here the advice of people who know how to wash a fur collar from a down jacket will come in handy. If the dirt is not very strong, you can bring it back to life yourself, without resorting to dry cleaning. Almost everything you need for work is already in your home.

First you need to define strategy and tactics. There are quite a lot of tips on how to clean a fur collar at home. The choice of resuscitation method depends on a set of information about the fur:

Qualitative characteristics - natural or artificial.
Species: fox, arctic fox, beaver.
Pile color and length.

How not to cause harm

First you need to remove the dust, laying the product fur-side down on a damp cloth and knocking it out without using force: after all, the interior is sensitive to mechanical influences. Only after this can you begin cleaning using one of the methods.

Any manipulations with fur (no matter whether it is natural or artificial) must be carried out, making sure in a small area that this method will not damage the product. All movements when cleaning collars, fur coats or vests should not be “against the grain”.

Washing for natural fur is not advisable., since deformation and shrinkage of the interior will occur - such a thing, unfortunately, cannot be restored. For synthetic furs, a similar procedure is also not very useful due to the fact that they have an adhesive base.

During drying, you only need to comb the fur (in no case against the lint). For all furs, drying with a hairdryer or over a radiator is unacceptable.

Synthetics also need care

Each of these parameters dictates its own conditions. When you have to resuscitate fur product, the first thing you need to pay attention to is its origin. Why?

The industry today produces fairly high-quality imitations of mink, fox or raccoon. But these materials also periodically require specific care. There are some subtleties, for example, treatment with a vinegar solution is absolutely not suitable for faux fur, while natural fur tolerates it well and even shines better.

To clean colored faux fur, you can use more than one method:

Cleaning the fluffy gold

Everything can get dirty. And one day you will suddenly notice that for some reason the fibers on the fox or arctic fox collar have begun to lose their shine, have become dull and are already beginning to stick together.

Naturally, you don’t want to put up with such a disgrace; you need to figure out how to clean it natural fur at home. And then the question arises, what is meant by the term "washing natural fur". After all, in a car or a bowl of powder expensive product hardly anyone will dare to send it.

But the collars are still “erased.” And in two ways.

Wet method

In fact, it would be much more accurate to call the procedure wiping, since the prepared product first needs to be moistened with a sponge or clean linen napkin and only then run it over the fur surface. In this case chemical composition gets on the pile, but does not affect the interior. After fifteen minutes, the product is thoroughly wiped again, but with a damp cloth soaked in clean water- This is a replacement for rinsing.

Anyone can say goodbye to the problem of a dirty collar; you just need to choose a cleaning method. Arctic fox fur can be returned at home former beauty , if you have patience and the necessary set of components:

Dry wash

The method is based on the ability of certain substances absorb fat and other contaminants:

Heated dry sand will help clean mole or beaver fur. You need to rub one portion into the pile, then another, and so on until your hands and sand are clean.
Heated bran will absorb impurities. You can rub rye or wheat. There is one circumstance: then you will have to spend a long time and carefully brushing out the bran with a brush and shaking the fur until the cleaning agent is completely removed.

In addition to these options, there are recipes using sawdust (not resinous ones), semolina, and starch.

It is possible to return whiteness

Signs of prolonged or not very careful wear appear more quickly on light furs. This treacherous shade appears, and yellowed hats, collars and fur coats begin to look somehow not very presentable. This is typical for both natural and synthetic fur products.

Why is this happening, Experts explain with objective reasons:

Some methods are suitable for restoring artificial and natural white fur:

You can remove yellowness from fur by spraying a bleach solution from a spray bottle. To do this, you need to pour one tablespoon of hydrogen peroxide from a bottle purchased at a pharmacy and dissolve it in a liter of water.
The second method is time-tested. More than one generation of housewives used it: they refreshed and cleaned white down and fur items with potato starch or semolina. By carefully rubbing in the starch, they imitated a very delicate wash. After this, shaking the product several times, removed the residue using a clothes brush.

You will have to fight the yellowness of the fur regularly, because there is no remedy that can forever return the former snowy glow. However, it is best to carry out lightening for preventive purposes, without waiting for too obvious changes in color.

Attention, TODAY only!

White mink products quickly lose their attractive snow-white shade during wear. Under the influence of factors environment fur acquires yellow, which is difficult to get rid of. To prevent yellowness in minks at home, you can prepare an effective remedy yourself. Useful components for bleach include hydrogen peroxide, ammonia, vinegar, blue, lemon acid and others active ingredients, allowing you to quickly restore the original appearance of white fur.

You can clean mink fur at home using dry bleaching methods. To do this, use substances that absorb excess moisture and dirt well and remove dust deposits. The following gentle components are used as dry bleaches:

semolina;
starch;
talc;
bran;
sawdust.

The main feature of this cleaning method is that it does not require the use of liquid, so the product will not need to be dried.

Semolina

Semolina grains perfectly absorb dirt and also remove dust. For processing, the product should be placed on a table or clean floor. If you need to clean your hat with semolina, you need to put it on a three-liter bottle wrapped in a towel.

You should clean the fur with semolina according to the instructions:

Sprinkle problem areas with a small amount of semolina.
The entire surface is carefully combed with a brush with soft bristles.
After the semolina turns gray, it is removed. If necessary, cleaning can be repeated.

You can remove semolina by shaking the product or vacuuming it. In the latter case, only weak devices should be used.

Gasoline based mixtures

A mixture made from potato starch and gasoline will help deal with yellowing. Both components are mixed until a mushy mass appears. The mixture is distributed over all contaminated areas and left until completely dry. The fur is carefully combed out using a fine-toothed comb. If desired, you can remove the applied product with a low-power vacuum cleaner.

One more effective means are sawdust soaked in a small amount of gasoline. The resulting product is distributed over the yellowed pile, and then gently rubbed into the product and left for 2 hours. The sawdust is shaken off and the pile is carefully combed out with a comb.

Wheat bran

The fur collar can be cleaned using wheat bran heated to 60 degrees. The product is heated in a clean frying pan, and it should be stirred regularly. Hot bran is poured in an even layer onto the pile, and then gently rubbed into it using a soft brush.

The applied product should be removed only after it has completely cooled. To remove small bran particles, comb the pile with a fine-toothed comb.

Talc, chalk, combed out with a comb

White talc, which is sprinkled evenly on the product, will help clean dirt and dust from a fur coat or hat. The ingredient is gently rubbed into the pile using a brush or fingers. After 2 hours, the talc is shaken off, and its remains are combed out with a special brush.

In a similar way, chalk or potato starch can be used to clean a fur coat or hat. For processing, chalk powder is used, which you can buy or prepare yourself by grinding a block.

Wet methods for removing yellowness

In addition to dry methods of combating yellowing of fur, there are wet methods. They involve the use of products prepared on the basis of active liquid ingredients. After such cleaning, the fur product should be dried or cleaned of the applied product with a damp sponge moistened with running water.

The product only needs to be dried in a natural way, hanging it on hangers or on stands. Drying near radiators, other heat sources or ironing should be completely avoided, as such exposure can damage the fur.

Hydrogen peroxide and ammonia

Clean quickly and effectively white fur Minks can be treated against yellowness using a mixture of hydrogen peroxide and ammonia. To prepare the product, you need to make a solution of 1 teaspoon of a 3% solution of hydrogen peroxide and 1 glass of water. Add 3-5 drops of ammonia to the resulting liquid, mix everything thoroughly.

Apply the bleach liquid to the fur carefully, using cotton balls. After processing, the product is combed and dried fresh air. You can hang the product on the balcony; if it is glazed, the window should be opened slightly.

Soap solution

There are several ways to clean white fur from yellow plaque using soap solutions. Each of them has its own characteristics.

You can use pet shampoo as a cleaning agent. These products contain a blue pigment that allows you to completely neutralize yellow tint. The basin is filled warm water, a small amount of pet shampoo is dissolved in it. To enhance the effect, you can add 2 tablespoons of hydrogen peroxide to the solution. The fur product must be carefully treated with a sponge soaked in the prepared product. The sponge should be guided in the direction of the pile. After the procedure, the fur is washed with a damp cloth and dried.
If the yellow tint is unsaturated, you can deal with it using regular liquid soap. The detergent must have White color or be transparent. Add 3 drops of liquid soap to a bowl of water and thoroughly foam the water. A clean sponge is soaked in a soapy solution and wrung out. The pile is wiped several times with a damp sponge, combed and dried.

Liquid soap can be replaced with shampoo or shower gel, which does not contain a coloring pigment.

Blue

In this way, not only natural fur, but also artificial fur can be cleaned. This product must be used very carefully, as its excess can lead to the appearance of violet shade on the pile.

A small amount of blue is dissolved in a basin so that the liquid acquires a pale blue tint. The resulting composition is poured into a spray bottle. The product is sprayed even layer for all fur products. The applied solution does not require rinsing. After processing, the fur is dried and then carefully combed.

Alcohol and salt

To prepare the bleaching liquid, dissolve 1 teaspoon of fine salt in a glass of warm water. IN saline solution add 1 teaspoon of ammonia, mix everything and use for cleansing.

The sponge is moistened in alcohol solution, and then the entire yellowed surface is treated with it.
The product is dried in the fresh air so that the smell of ammonia completely disappears.
The procedure is completed by combing the lint.

When removing a weak yellow tint, you can avoid using ammonia by treating the pile with a saline solution.

Vinegar with lemon juice

This product effectively removes yellow spots on the pile. It should be used spot-on, avoiding processing the entire fur product. To prepare the product, you need to mix 1 teaspoon of vinegar and the juice of a quarter of a lemon.

A cotton swab is moistened in the prepared liquid, and then all stains that appear are wiped with it. The yellowness is gently rubbed with a brush with soft bristles, and then the fur is dried.

Any described method will quickly and effectively eliminate the yellow tint on a product made from mink fur. These products should be used very carefully, avoiding strong mechanical impact on the pile or its excessive wetting with prepared liquids. Otherwise, the fur may lose the attractiveness of its structure and lose its shine. If during the cleaning process the housewife did not calculate the amount necessary means, and the fur product lost its attractive appearance, you can restore the shine of the pile by wiping it with a 10% glycerin solution.

Fur collars – fashion detail, used in the design of outerwear: jackets, down jackets, coats, parkas. Regardless of whether it is made from natural or artificial material they are completed fur collars Perfectly decorate and complement any wardrobe items.

Unfortunately, fur gets dirty quite quickly, so maintaining the attractiveness and presentation of a collar can be difficult. There are several ways to clean a fur collar at home. Let's look at popular recipes for cleaning faux and natural fur.

Natural fur is very easy to spoil and render unusable, so it cannot be cleaned with aggressive and potent agents. For cleaning natural collar Only gentle methods are used.

Cleaning fur from yellowness - video:

Starch

Clean fox, sable, mink collar light shades starch will help.

Take a small amount of starch in your hands and rub it into the pile.
Wait until the starch darkens, shake it out and repeat the procedure until the abrasive substance no longer becomes dirty.
Clean the product by shaking and ventilate in fresh air.

Starch can be replaced with semolina, talc powder, or crushed chalk.

You can clean fur trim with a short undercoat and long pile, like that of a beaver, otter and nutria, using river sand.

Heat the sand and rub it into the pile using gentle circular movements.
Let the sand cool and collect the dirt from the undercoat.
Clean the product from sand and let it air.

Do not heat the sand too much to avoid damaging the fur.

Fur items can be washed in a soap solution prepared using baby shampoo. This is a gentle and gentle method of getting rid of fat stains.

Mix 1 tablespoon of shampoo with a liter of warm water. Shake the solution until foamy.
Apply foam to the pile using a soft sponge and wait 15 minutes.
Wash the product and then rinse thoroughly in cold water.

The washed collar must be dried naturally: without squeezing, on moisture-absorbing fabric, away from radiators and heaters, with periodic shaking and combing.

Pharmacy hydrogen peroxide will help get rid of yellowness on furs of cold shades.

Dilute 1 tablespoon of peroxide in 200 ml of warm water.
Moisten cotton pad in the solution, wipe the pile with it.
Rinse the product, dry it in the sun, combing it periodically.

Instead of peroxide, you can use “blue” - a mineral blue dye used to turn clothes blue. It is diluted in water until translucent blue color, and then used to wipe the collar with a cotton pad.

Table vinegar

Silver fox, mink and sable trim dark colors can be cleaned and refreshed with aqueous solution table vinegar.

Mix 100 ml of 9% table vinegar with 80 ml of warm water.
Soak a cotton pad in the solution and apply in the direction of the nap.
Repeat until the cotton pad stops getting dirty.

In addition to removing dirt, this method will add shine and well-groomed appearance fur product.

How to clean an artificial collar?

Faux fur is cheaper and easier to handle, so more aggressive methods can be used to clean it: ammonia, gasoline, detergents for dishes, carpets and furniture. Here are 5 of the most effective recipes with their use.

Restoring artificial fur- video:

Salt and ammonia

This recipe will give you the opportunity to get rid of grease and dirt stains.

Mix 3 tablespoons of salt, 1 tablespoon of ammonia and 200 ml of water.
Soak a cotton pad in the solution and rub the fur item with it.
Shake, Wipe wet wipes and dry the item.

Ammonia can also be used to clean natural fur.

Dry clean with dishwashing detergent, washing powder and potato starch eliminates contaminants of any origin.

Mix 30 g of starch, AOS and powder. Mix thoroughly until you have a mushy consistency.
Apply to stains and leave for 3-4 hours until completely dry.
Clean with a stiff brush, removing any dried mixture residue. Rinse the item and dry it in fresh air.

Don't overdo it with friction: too much pressure on the faux fur can damage it.

Petrol

Delete greasy spots And heavy pollution gasoline will help. The way to use it is as follows:

Soak in gasoline cloth napkin or a rag.
Check in an inconspicuous area to see if gasoline is corroding the paint.
Rub the stain or dirt until clean.

Do not forget to wash the item after using gasoline: it has a pungent and difficult to remove odor, which can be dealt with by soaking it in a gentle conditioner.

You can clean a faux fur collar at home using household household cleaners. Suitable products for cleaning carpets, upholstered furniture, and curtains.

Select suitable remedy, dilute according to the instructions.
Apply to the pile, wait the required time.
Remove any remaining product with napkins or paper towels.

In order to exclude harmful effects chemicals on the product, wash it after cleaning.

Gentle wash

If the artificial collar does not detach from the down jacket or jacket, if it gets dirty, it can be washed together with outerwear. This is done like this:

Buy neutral detergent, pour it into the washing machine.
Start the gentle wash program and turn off the spin cycle.
Wring out the item on your hands, without twisting or applying pressure.
Place on the dryer and dry naturally.

During drying, you should shake the clothes and comb the pile every 2-3 hours.

Now you know how to properly clean fur collars from different types materials. These methods are faster, easier and more effective than going to the dry cleaner, where no one can guarantee the safety and pristine appearance your product.

Products made from blue mink are not cheap, and caring for them is quite painstaking, why then do they attract girls and women so much? The answer is simple: usually such fur is used to make elegant clothes that look incredibly beautiful, and every woman can choose the right fur coat for herself and feel her best in it! In addition, when proper care the product can serve you for more than one season. In this article you will learn several methods on how to clean blue mink without damaging or spoiling it.

Using alcohol

Surely every housewife has a jar of this somewhere in her medicine cabinet. useful remedy, and if not, then you can easily buy it at the pharmacy. For this method, you will need ammonia or rubbing alcohol and water. How to use this method:

Take these ingredients and mix in proportions of 1 tablespoon of alcohol ingredient and 2 tablespoons of water (if the contaminated area is small).
After this, soak a cotton pad in the resulting mixture and squeeze it out.
Gently rub the stain.
Take a dry, clean towel and use it to blot all the areas you cleaned.
Finally, fluff up the fur and leave it until completely dry.
Repeat the above steps if necessary.

Medical alcohol very well removes not only yellowness, but also stains from lipstick and foundation, which almost every girl encounters quite often. It is very important to follow all instructions, otherwise the structure of the fur may be damaged and not restored.

Advice: if your mink product has a long pile, then you need to rub it in the direction of the hairs, and if the mink is shorn, rub “against the grain.”

Using potato starch

Almost every owner of an amazing blue fur outfit has encountered the problem of yellowness. It appears as a result of wear and tear on a piece of clothing, and many people solve this issue by hanging the item as far as possible in the closet with the hope that the stain will disappear on its own, or simply throw the item away. There is no need to rush to take such drastic measures; there is a simple method to get rid of this kind of stains at home:

Find or buy potato starch.
Sprinkle a small amount onto the yellowed stain.
After this, use your hands to gently rub the fur.
Use a soft brush (can be used for clothes or an old toothbrush) to remove any excess starch.
Carefully shake out the fur coat. It is advisable to do this in the fresh air.

Just like that, using ordinary potato starch, you can save a product from old age and wear and tear at home in a few minutes. Thanks to this, you can delight yourself with your favorite blue mink outfit for many years to come, and those around you will tirelessly compliment you.

Advice: before using one or another method, be sure to first test it on an inconspicuous piece of the product and find out how exactly your item will react to the cleaning method you have chosen, and then, if all is well, apply it to the contaminated area or to the entire surface.

Using hydrogen peroxide

And again, a home first aid kit will help you out; there are many useful medications that can successfully serve other than their intended purpose. You probably also have a bottle of peroxide in it. Use it to solve the staining problem of any fur clothing. So:

You will need 3-5% peroxide and ammonia, which must be mixed in equal proportions.
Using a spray bottle, you need to spray the problem area with the resulting mixture.
After this, use a cotton swab slightly moistened with water to wipe the area to be cleaned.
Remove moisture with a clean, dry towel.

This way you will get rid of the yellowed stain and will continue to enjoy your reflection in the mirror before going out every time you put on an elegant blue mink coat.

Using glycerin

This is another remedy that is used in medicine, and in our case, thanks to it, you can renew the color of a fur coat (get rid of yellowed spots of old age) and add shine to the fur. To do this, follow these steps:

First, soak a cotton pad in glycerin.
After this, you need to walk it over the entire mink surface from top to bottom.

This way you can refresh bright color favorite fur coat, and every season it will delight you with its presentable appearance, and people around will think that it is new thing and give you nice compliments.

Advice: this type of cleaning should be carried out no more than twice a season to maintain the good appearance of the product.

Using semolina

If you are not a fan of semolina porridge and you don’t have this cereal at home, ask a friend or neighbor, or buy it in bulk, because you only need a little of it. Use this method to remove unwanted stains from mink fur. Here's what you need to do to do this:

First you need to cook the porridge: take 2 glasses of milk and 2 tablespoons of cereal.
Cool the resulting mixture and apply to the required areas of the product.
Leave it like this until the morning.
After this, use a soft brush to clean the mink surface.
Use a blunt-toothed comb to comb out the grain and shake it out.

Before throwing away or putting away a damaged item, and even such an expensive one, in your wardrobe, first try to clean and renew it using the methods described above. After all, they are very simple and affordable, you can use them both at home and at work, and the result will be no worse than after dry cleaning. Having done this, you will put on your favorite fur coat, vest or any other blue mink product with the same feelings and emotions as the first time, and for this it is worth spending several hours of your time.