Knitted slippers with knitting needles step by step. Secrets from the masters. A wonderful product according to the Japanese method with a photo

Cute house slippers with knitting needles can be knitted from any yarn. In winter, it is better to take a woolen thread, and for the summer you can make slippers on two knitting needles from cotton Lilac. Many wear shoes with heels - make a gift to your favorite legs - knit the footprints with knitting needles. We have prepared for you 4 different options, simple and complex, so you can choose the best for yourself.

Lovely pink slippers are knitted from a thick wool yarn. Schemes are given for three sizes: 22 cm foot length - size 35/37 (a), 24 cm foot length - size 38/39 (b), 26 cm - 40/42 (c). We knit on two knitting needles, the third - additional - is needed for the “braid” pattern. The main knitting is garter (facial).

For work you will need:

Thick wool blend yarn (50% wool, 50% synthetics) 100 gr./100 m. - 1 skein.
Knitting needles 5 mm thick.
Additional knitting needle for a pattern.
Circular needles for convenience (optional).
2 pins.

Knitting density: 10/10 cm. = 13 p. / 26 rows. Knitting patterns for the pattern for the left slipper - pattern A 1, for the right slipper - pattern A 2. The pattern depends on the size.

Left sneaker

We start knitting slippers on two knitting needles from the left slipper. We collect on the knitting needles 6 mm - 36/38/40 loops - for a / b / c sizes of the product. Having distributed the loops on the knitting needle, we knit 4 cm in garter stitch. Next, we will knit only on the first 11/13/13 loops, while the rest of the 25/25/27 sts are removed for additional. knitting needle. While we do not touch this part of the knitting, we work with the first loops. Further, we knit these separate first loops (the top of a slipper with a pattern) as follows:

1st row: 11/13/13 p. Facial.
2nd p: we add 2 loops, it turns out 13/15/15 p. facial.
3rd p: add 2 more loops, we get 15/17/17 p. persons.
4th p: knit according to pattern A1 with edge loops, that is, 1 chrome. p., drawing A1, 1 chrome. P.

Thus, according to the scheme, we knit until we reach a height of 6.5 / 9 / 9.5 cm. We knit the last row in such a way as to make 4 decreases. We should get 11/13/13 p.

Now is the hardest part. We have loops for extra. spoke, and upper part products. Then we raise the loops of the sides of the top of the slipper, on the one hand - 12/14/16 p., And on the other side of the top another 12/14/16 p. Together with loops with additional. knitting needles should turn out 60/66/72 p. It is most convenient to knit further on circular knitting needles, for lack of knitting on ordinary extra. cn.

Next, we take measurements. We take 1 pin, and mark the mark of the toes with it, mark the middle of the heel with the second pin. Knit 2 cm, and start decreasing one loop on both sides of each pin (knitting two stitches together faces.). That is, in each we decrease 4 p. We make decreases until we reach the height. 5/5/6 cm. We close the loops.

We knit the second, right slipper in the same way as the left one, only knit the top of the slipper according to scheme A 2. We sew the seams on the foot of both slippers. That's all.

Knit slippers from squares - good idea. Knitting is exciting, you can make home slippers with knitting needles in one evening, sitting in front of the TV, or listening to good music. Cute closed slippers connected simple pattern"grain", and "rice" will warm the legs, and add comfort. Slippers on 2 knitting needles, crocheted details. At the end of the work, the parts are sewn together, as in the diagram. Size 36-39.

For work you will need:

Thick yarn Pingouin (50 g / 34 m.) 30% wool, 70% acrylic - 2 balls of black and orange.
Knitting needles 4 mm thick.
Hook 4 mm thick.

We knit strips with a garter stitch: 2 rows of black yarn, 2 p. orange We knit the main details with a “rice” pattern and a “grain” pattern. Pattern density: square 10/10 cm = 15 p. / 15 p.

1st p.: 1 cr., 1 person., 1 out., 1 l., 1 out., etc.
2nd and 4th p.: how the mating looks.
3rd row: 1 cr., 1 out., 1 l., 1 out., 1 l., etc.

The second name of this pattern is pearl, here faces simply alternate. and out. loops.

Cast on 15 sts on the needles and knit 10 cm. 2 squares A with a “grain” pattern with orange yarn. We thread the thread into the loops, do not close the loops. This is necessary for the flexibility of the seam.
Cast on 15 sts on needle and work 1 square B in rice pattern with orange yarn. We knit 10 cm. We also thread the thread in the stitch, and do not close the knitting.
Dial. 15 sts and knit 1 square C pattern "rice", color black. We knit 10 cm, not closed. knitting - we thread the thread.
Cast on 2 times 15 sts and knit 2 times 10 cm 2 squares in D in black garter stitch. Do not close the knitting - thread the thread.
We knit 2 square. E in garter stitch stripes in two colors. (We collect 15 points each, we knit 10 cm each). Not closed knitting - we thread the thread.

We collect squares, following the scheme. For the top of the slipper, we sew side C with side D. After the slippers are sewn, on the sides of the squares E, crochet with a crochet step with black yarn. Rachey step: we do RLS, but from left to right, and not vice versa. We knit the second slippers, like the first. Knitted slippers with knitting needles are ready. Both one and the other slippers are suture, that is, sewn from squares.

Knitted home slippers are a convenient and necessary thing. Such beautiful slippers Knitted knitting can be washed in the machine, they are comfortable and beautiful. Good for a gift, and for yourself, your beloved. A simple version of slippers with knitting needles for beginners. Slippers are decorated with flowers, crocheted, and embroidery woolen threads. There is embellishment with beads. Product size - from 36 to 40.

Beginning of work

For work you will need:

Yarn of medium thickness (For example, "Violet" - in 3 threads).
Remains of wool for embroidered flowers.
Beads of various sizes.
Knitting needles 4 mm thick.
Hook for flowers 2 mm.

We begin to knit the base of the slipper. Cast on 34 stitches.

1st p: 1 chrome, 32 persons, 1 chrome.
2nd p.: 1 chrome., 10 persons., 1 out., 10 persons., 1 out., 10 persons., 1 chrome.
3rd - 34th rows:

Odd rows - like the 1st p.

Even. rows - like the 2nd p.

35th p.: 1 chrome., 11 persons., 1 add (knit from 1 p. - 2), 8 persons., 1 add, 11 persons., 1 chrome.

How to make from one loop - 2 loops - adding 1 person. tilted to the left.

36th p.: 1 chrome, 10 persons., 1 out., 12 persons., 1 out., 10 persons., 1 chrome.

37th p.: 1 chrome, 34 persons, 1 chrome.

38th - 63rd:

Even. rows - like 36 p.

Odd R. - like 37 p.

64th - 72nd - gum 1 person / 1 out.

We do not close the loops, leave the tail. Where there was a series of increases - the place where the foot expands.

We start with socks. Pull the remaining tail through the loops in last row. Pull the thread and secure it by tying a knot (Photos 2 and 3). Then sew the part that is knitted with an elastic band + 8-9 more rows (Photo 4 and 5).

You can make the tracks deeper, or smaller - it all depends on the number of basic loops cast on. Focus on the width of your feet.

Then we proceed to the heel. We pass a thread through the middle of the beginning of our knitting (side A), and tighten this middle part. And 2 parts side by side (B and B) are sewn with a neat seam (Photo 7, 8, 9).

Thus, it turns out such a sneaker-sledok.

Close a chain of 4 VP half-column into a ring. From the same loop, knit a trace. chain from 4 VP, closing the half-column in the ring (Hook in the 1st p. Chain.). Thus, make 4 petals. As a result, Comm. 4th and 1st petal conn. pillar.

You can decorate your slippers in any way, it all depends on your imagination.
For warmth, felt or leather insoles are sewn on.

Beautiful, cozy slippers with knitting needles with a pompom can be knitted on 5 knitting needles, without a seam. The tracks are knitted quickly, they do not need to be sewn at the end of knitting. A very simple master class: "Slippers with knitting needles with a description" - attached. It is especially relevant for beginner knitters.

For work you will need:

5 knitting needles 4 mm thick.
Yarn of medium thickness (Troitskaya - in 2 threads).

Knitting density: 10/10 cm. = 20 p. / 24 p.

We will make such footprints in the same way as knitting a sock.

Cast on 32 stitches.
1st row: all facial.
2nd p.: 10 facial, 1 out., 10 l., 1 out., 10 persons.
3rd row: how the knitting looks.
4th row: as 2nd.

For those who have never knitted socks on 5 knitting needles, here is a description of how to make a heel. Or maybe they knew how before, but forgot the details - let's refresh our memory. We start forming the heel from the 16th row. For beautiful heel you need to connect 10 persons. (This is the side), 1 out., 10 persons., 2 together out. (This is the central part). In the 16th row, we attach 1 p. of the side. We turn the work around.

Starting from 17 p. We continue to knit only the center of the heel (the central part - 12 points), attaching 2 side parts to it in the course of work.

So, 17 p.: Remove 1 p., 10 persons., 12th p. Center. h. remove, 1st p. side h. knitted. persons., we throw the removed one onto the knitted one. Then repeat the 16th and 17th rivers, gradually attaching 2 side parts. It turns out that in izn. rows last p. center. parts + first p. side part - knit 2 together out. But in faces. rows - the last p. Center. h. remove, without knitting, the 1st p. lateral h. knit persons., and transfer the removed p.

Now there are 12 stitches left on the needle. Center. h. Next - dial 10 p. along the edge of the side h. (Look at the photo).

Flip the item over to the other side. We knit all the sts of the side part, the central part, then we collect 10 sts along the edge of the other side ch. We should have 32 sts on the knitting needles (Look at the photo).

We continue to knit facial. Purl r. - 10 persons., 1 out., 10 persons., 1 out., 10 persons. Facial r. - facial. We knit to the bone on the leg, on the sole we get beautiful faces. pigtails. They tied it to the bone, at the end of the faces. row we collect 8 loops on the knitting needle, we close the knitting in a circle.

We distribute all the loops on 4 knitting needles, we knit in a circle in a garter stitch. before our little finger closes.

1st knitting needle: 1 person., 1 remove person., 1 person.
2nd knitting needle: all sts of persons until 3 sts are left on the needle - we knit (two persons together, 1 persons).
3rd needle: same as 1st.
4th: like 2nd.

We knit a spout, reducing the item through a row., Then in each row, until it remains on each. knitting needle 2 loops. We connect all the stitches. Fold the knitting needles in parallel, and remove 2 together. Stretch the last p. inward, and strengthen with a knot.

We decorate slippers with pompoms.

Video on how to knit simple slippers, very fast.

You have learned how to knit simple loops: knit and purl, why don't you try to knit slippers with knitting needles? Slippers are essential footwear for every day at home. Even if you are warm and comfortable at home, in slippers, knitted with your hands you will feel much more comfortable.

Slippers with knitting needles can be knitted from thick yarn of the same color, or you can choose fun colors and spend the rest of different threads. Multi-colored slippers are knitted using lazy jacquard or patchwork technique. Both of these techniques are interesting and unusual. Worth trying them out simple things, like slippers, and then use in large products. interesting selection to the website Selection for knitting on 2 knitting needles

Sole for knitted slippers

Most weakness at knitted slippers- outsole. It wears out quickly, so to strengthen the sole in ordinary threads you can add a thick nylon thread. Alternatively, you can buy a ready-made sole for slippers, tie a double sole, sew to knitted sole leather insoles or buy special yarn for knitting socks. It is pre-treated and resistant to abrasion and does not peel.

Yarn for knitting slippers with knitting needles:

Alize Superwash - 75% superwash wool, 25% polyamide; 420 m/100 gr. (Türkiye)
Yarn Opal (Germany). This yarn has many colors and patterns, but it is expensive.
Yarn Trinity sock Waterfall - 70% wool, 30% capron; 400 m/100 gr. The most affordable. Suitable for plain slippers. (Russia)
Yarn ZitronTREKKINGXXL - 75% virgin wool, 25% polyamide; 420 m / 100 gr); (Germany).
Yarn Pekhorka Nosochnaya - 50% wool, 50% PAN; 200m/100gr (Russia). This yarn has the smallest amount of wool in the composition.
Schachenmayr Regia yarn for socks is of high quality and beautiful, composed of 75% wool and 25% polyamide. She has one minus - the price. Yarn from Germany.

What knitting needles to choose for knitting slippers

The choice of knitting needles depends on the model of slippers. Some slippers are knitted on 5 stocking needles, and some on two knitting needles. A crochet hook is often used to knit soles. And yet, do not forget to purchase markers, they are needed for complex patterns.

But for starters, it’s still worth choosing the model you like and buying yarn for it, choosing knitting needles. We have already talked about yarn, and now we offer you a selection of more than 30 models of slippers with knitting needles. Knit for your pleasure.

Slippers with knitting needles. Models from the Internet

Rectangular knitting slippers: a step-by-step master class!

The basis of these wonderful knitted slippers is the most ordinary rectangle, knitted on two knitting needles, and then sewn along the sole. Brilliant solution, right? Here are two options for rectangular slippers, green and red-brown. See detailed master class with a pattern from Elena Gotlib and please yourself with a new thing!

Slippers knitting from T. Brazhnikova

Scandinavian slippers knitting

Let's knit slippers for the house, soft, beautiful and comfortable. They will be pleasant to walk around the apartment, easily and silently.

They are knitted from Vintage yarn (200 m/100 g), in two colors - Oats and Promenade. We take one skein of each color. The thread of yarn includes fibers of wool (40%), acrylic (52%) and nylon (8%). It is durable, soft and good preservation appearance.

We will knit with 4.5 mm knitting needles and 4 mm crochet. You will need a stitch marker (pt).

Knitted slippers knitted garter stitch

Yarn: two skeins of thin sock yarn(each yarn needs about 35g/160yd/150m). Since these two yarns will be joined together, you can choose the appropriate thickness of yarn for knitting in one thread.
Yarn contrasting color for seam and edge binding (thin for knitting in 2 strands or thicker yarn).
Size: female large (EUR41). The size can be easily adjusted by changing the number of loops and the length of the sock.
Gauge/Needle: Gauge: 19 sts / 10 cm (4 inches) in garter st.
Needles: 3.5 mm (circular or stocking). One additional knitting needle for closing loops using the 3-needle method. Hook 3.5 mm. Darning needle for stitching.

Knitted slippers knitted with lazy jacquard

Size 37-38.
Yarn “Krokha” Troitsk Worsted Mill, 20% wool, 80% acrylic, 135 m / 50 g.
Consumption of light gray yarn 30 g, brown 40 g.
Set of 5 knitting needles No. 3.

Knitted slippers from designer Ashley Knowlton

Slipper final measurements: foot circumference: 16.5(19.5, 22) cm.
Length to joint: 10(11.5,12.5) cm.
The overall length can be changed.
Yarn: about 92 (110, 146) m of thick yarn. The total footage depends on the final length.
Sample used yarn Quince and Co. Puffin (100% wool, 102m per 100g skein), color Parsley (parsley).
Knitting needles and tools: circular needles US 10.5 (6.5mm), for magic loop knitting, two cr. knitting needles, or a set of toe knitting needles.
Needle for braids; tapestry needle; latex glue for soles (preferably).

Slippers - knitting boots

Slippers - knitting slippers

Slippers - footprints with knitting needles

Slippers with knitting needles. Works of our readers

Knitting slippers with knitting needles. Master classes of our readers

Slippers - traces with knitting needles. Master class from Farida

Knitted footprints with a star pattern. I will describe how I knitted these footprints. The biggest snag here is the correct connection of the heel. Once you do it, it will seem to you that nothing is easier.

Slippers - traces with knitting needles. Master class from Oksana Usmanova

The tracks are made of ALIZE DIVA yarn 100gr-350 m (100% microfiber-acrylic), it took less than half a skein, 4 stocking knitting needles are required, a hook 1.3 for tying.

Slippers with knitting needles. Video lessons

Multi-colored slippers with knitting needles:

Simple and comfortable slippers with knitting needles

We knit simple, but very comfortable and warm slippers. The size is given for size 38-39.

The video should load here, please wait or refresh the page.

Beautiful and cute house slippers will decorate any home. In the meantime, you can make such a charm yourself. Everything you need to create your own little masterpiece, - these are threads and a hook (well, or knitting needles). In addition, a person should know the rules of crochet for beginners. To do it yourself, very dense threads are used.

Some stores even have an indication on the skeins that they are used for knitting slippers. For a beginner needlewoman, puzzled by the question of how, it is best to get used to a specific example.

Beautiful and interesting slippers will sit perfectly on the leg and please the eye. However, initially the leg is measured in height and width, and according to the measurements, a pattern is made. To understand how to calculate the pattern and make it, pay attention to the photo below.

slippers pattern

Let's say a person makes slippers as a gift, and he cannot try on the donee's leg, then the plate will help.

size table

Crocheting slippers on your own is easy, even inexperienced craftswomen can usually handle it. When all the necessary blanks are made, selected, we proceed to the implementation of the sneaker.

First we make the heel. We collect loops in the amount that is needed.
We look at the patterns to clarify their number and density.
After that, we crochet single crochets.
We add one loop on each side until we finish the heel.
Next, we will make the canvas to the middle of the foot and again add one loop from the beginning, and then at the end of the row.
We knit our fabric to the end of the little finger.
After we do this, we decrease on both sides in a uniform way, somewhere in 3 or four loops.

Now we step by step create the upper part of the slippers.

We make it from the bottom up, making reductions.
We collect as many loops as necessary.
We knit columns without a crochet, and in the middle we decrease every 3 rows.
We continue our knitting until we make the height we need.
It remains to collect the product. We connect the sole and the upper part.
And at the edges we knit connecting posts.
When we made slippers, we knit the second one.
If this is your first time crocheting slippers with your own hands, then you can first use one color. But then you can make multi-colored ones - from two or 3 tones.
At the end of knitting, we decorate our slippers with pompoms either.

Here are some cute slippers you should get:

Slipper squares are used as part of the motif. You can make other things with the same squares - for example, and also a scarf, and more. Now let's move on to the example for slippers.

DIY square slippers

Do not forget about the pattern for slippers - it must be done. Then we knit motifs, while choosing simple patterns for knitting slippers for beginners, or you can use the one below.

Slipper knitting pattern

Such a knitting square is called grandmother's. To create it, create a chain of 4 loops, make a circle. The beginning of the row consists of three lifting loops, and at the end there must be a connecting column. Further, at the beginning it is knitted less than in the next arc.

Perhaps you did not quite understand how to crochet slippers with such squares. Experienced knitters advise trying to make 1 sample square. Then it will be easier for you to navigate.

The first row consists of 11 double crochets, which are tied into a ring.
In the second row, two double crochets are knitted into each previous column. These two columns are connected to the following air loops (one piece).
The third row is done in this way. In the previous row there were air loops. Of these, 3 columns with a crochet are made, which are connected to the next three columns with air loops - once 3 pieces, and 2 times one at a time.
We make 4 rows. Our guide will help you. We knit 3 air arcs from the third row as follows: two double crochets, then 1 air loop, then one double crochet, again one air loop, and finish with two double crochets. These arcs are connected by 1 air loop. An arc was made from one air loop. From it we knit three columns and connect with the next 1 air loop.
The fifth row will be our last. In an arc consisting of two air loops, it is necessary to knit 3 columns with a crochet, connect 1 time with 3 air loops. The second time we connect one air loop with the column that comes next. In an arc consisting of one air loop, we knit 3 columns with a crochet. We connect with the next 1 air loops.

Such a crochet slipper pattern for beginners helps to create a solid square or multi-colored ones. Combine slippers as follows: connecting posts. Combine 4 squares, you get one big square, which I unfold in the shape of a rhombus. To the edge bottom corner another one of the same is applied, sewn together, the heel is sewn to the sole.

Then the side triangle and heels are divided into three parts. We sew all adjacent parts. When our slippers are ready, we tie them on top with half-columns in the amount of 1 row.

To sew such slippers without a single seam, first we knit the sole according to the pattern, which can be seen below. And our master class and tailoring will come to your aid.

Seamless slippers

We collect 23 air loops, in each row 3 air loops at the beginning. They are needed in order to raise the row, so they are left.

Knitting pattern without seam slippers for beginners:

Knitting pattern for seamless slippers

1 row. We knit two double crochets, then one st.s / n. Having reached the end of the chain, we knit 4 columns in the last loop. We knit a circle on the other side of the chain - 1 half-column in each loop, then you need to knit three columns with a crochet into the very first loop.
2 row. 3 lifting loop - to create 3 columns with a crochet. Then in a circle we knit 15 columns with a crochet in each loop, another 20 half-columns, then 14 columns with a crochet, and between the loops two columns with a crochet.

Now we need to fabricate up. From the half-column of the heel we draw 3 air loops. We break the thread. We knit the first row with double crochets in the amount of 56 pieces. The second row is this way: first there are three columns with a crochet and two columns made from one loop, 5 columns and 2 more also from one loop. Next 12 columns.

We skip one loop, make a rapport: two columns with a crochet of 2 knitted together, two loops together with a crochet 2 times, we knit two loops together, we make a column with a crochet from them. Then we make 2 loops together with one column and two more columns, make a report, and knit 10 columns with a crochet.

The third column consists of 26 double crochets, with two columns from one loop, then one double crochet. repeat 5 times and end with 10 double crochets.

The fourth row is almost like 3, only there are 25 columns. Similarly, 2 columns from one loop and two columns with a crochet. Continue 6 times, then make 8 double crochets.

And finally, the fifth row, consisting of double crochet columns, with which slippers are tied.

We hope you understand how to crochet slippers without a seam with your own hands. Used to decorate the edge of the sole step step, and then create a second slipper. Our beautiful slippers for beginners can be further embellished with embroidery or beads.

So many various models, which you can do yourself with a hook and thread: flip flops, shoes, sneakers, in the form of some toys. To make one yourself a pleasant surprise, all you need is patience, imagination and a little free time. You can also additionally watch video instructions for children's slippers and products on the sole:

Knitted slippers, knitted according to a wide variety of patterns (including those on two knitting needles), are a great alternative to home shoes for children and adults, as well as a touching, sincere, warm handmade gift for loved ones.

Even the most inexperienced craftswomen who are familiar only with the basics of knitting can make this useful element of a home wardrobe, for this you just need to pick up suitable model with a job description and strictly follow the recommendations.

Yarn for slippers

Knitted slippers must be not only beautiful and warm, but comfortable to wear, otherwise they will not be able to fully please their owner.

Comfort knitted product largely depends on the yarn, so when choosing it, you need to take into account some important nuances:

To make the product as warm as possible, it is important to pay attention to yarn composition. Experienced knitters recommend choosing natural woolen and half-woolen threads for socks and slippers. Products from them are very warm, breathable, and also the most durable.
Second important parameter – yarn thickness. If you choose a thin thread, then the slippers will not be warm, if the yarn is too thick, then the product may not be very comfortable to wear. The best option is threads of medium thickness: 200-300 m / 100 g. You can also take more fine yarn, but knit the product in this case in 2-3 thread additions.
If slippers will be knitted for a child, you should give preference to a special baby yarn, because it is hypoallergenic, has a safe composition and is very pleasant to the touch.
Choice product colors always remains with the craftswoman, but if slippers are knitted from various leftover yarns, it is very important that they not only match color scheme, but were about the same thickness and texture. If this is not observed simple rule knitted fabric can turn out uneven and sloppy.

What sole to choose (make) for slippers

The sole for slippers can be made of various materials. The simplest and most common option is the sole, knitted from the same or denser yarn as the slippers.

For strength, many needlewomen add one more thread to the main thread while knitting it.

If a more wear-resistant option is required, then the sole can be made of felt or tight skin. Its shape is easiest to cut out according to a suitable insole. The sole can be made separately and then tied or sewn to the finished product.

Knitting needles

For knitting socks and slippers, craftswomen use special knitting needles, which are sold as a set of 5 pieces. They differ in the material of manufacture (metal, wood, plastic) and diameter (marked with numbers).

The material from which the spokes are made does not matter, it is a matter of personal preference.

The number of knitting needles is selected depending on the nature of the product and the thickness of the selected threads. For knitting slippers and socks, it is recommended that the diameter of the knitting needles approximately coincide with the thickness of the thread, in this case it will be most convenient to knit, and the fabric will turn out to be dense, even and beautiful. For example, for yarn 250-300 m / 100 g, knitting needles No. 2.5-3 are optimal.

Additional accessories for knitting slippers

In addition to yarn and knitting needles, when creating knitted shoes may need:

knitting markers (special plastic hooks used to highlight loops in calculations);
hook (with its help it is convenient to hide the “tails” of the cut threads, as well as tie the edges finished products);
thick needle with a wide eye (for stitching products).

All of these knitting supplies can be purchased at craft stores along with yarn and knitting needles. Do-it-yourself women's and children's slippers can be supplemented with accessories that will make the thing more interesting, beautiful and unique in its own way.

For this purpose, use:

decorative buttons;
beads;
crochet flowers;
bows and ribbons;
pompoms, etc.

Common abbreviations

Knitting (slippers on two knitting needles): schemes, descriptions of the work presented below contain generally accepted abbreviations:

Loops - p .;
front loop- l. P.;
purl loop - i. P.;
edge loops - chrome;
row - r.

Simple slippers on two spokes

This simplest model slippers are knitted on two knitting needles in just a couple of hours, the proposed scheme is perfect option for beginner needlewomen: it will help to “fill” your hand and please you with an original appearance. Calculations are given for foot size 38-39.

Necessary materials

Scroll:

Yarn (300m / 100g) - 1 skein.
Needles number 3.
Knitting markers.
Stitching needle.
Additional accessories.

Sequence of work

Performance:

Slippers on two knitting needles from a rectangle

This original model slippers by appearance resembles oriental shoes, while knitting it on two knitting needles is very easy, because during work you will not need to perform even any increases and decreases according to the scheme. At the base is a rectangle knitted with a garter stitch (all rows are performed only with facial loops).

The most impressive look are similar traces made of sectional dyeing yarn., but you can knit them from plain threads, and from multi-colored residues.

For work you will need:

Yarn (250 m / 100g) - 1 skein.
Needles number 3.
Needle.
Hook.

Sequence of work

Performance:

First of all, they perform calculations so as not to be mistaken with the size of slippers. Measure the length of the foot, multiply by 2 - this is the required width of the rectangle. A test sample of 10 sts is knitted from the yarn you like, it is measured and the required number of loops is calculated for the resulting width.
Based on the resulting calculations, loops are cast on the knitting needles, a rectangle 12 cm high is made with a garter stitch. The loops are closed, with the help of a hook they process the top with any convenient way- columns, pico or "shells".
Fold the rectangle in half, form a toe, folding the edges of the product in the shape of a cone. Sew along the line of the sole.

Men's knitted moccasin slippers

Men's slippers, reminiscent of moccasins, are knitted on two knitting needles according to the above pattern quite easily and quickly, but at the same time they look very original. The given calculations correspond to the size 40-41. The entire product is made in a simple garter stitch, that is, in all rows, the loops are always knitted only with facial ones.

To make them you will need:

Yarn of medium thickness -80 g.
Needles number 3.
Hook for decorative processing.

Sequence of work

Performance:

Slippers-footprints on two knitting needles without a seam

The most comfortable for adults and children are socks and slippers knitted on two knitting needles according to a seamless pattern: they fit snugly to the leg, without causing inconvenience when worn. Seamless slippers are also beneficial because they can be worn not only at home, but also worn under shoes in cold weather.

The master class presents calculations for foot size 36-38.

Prepare materials:

Yarn (250 m / 100g) - 1 skein of the main color, 50 g of finishing yarn in a contrasting color;
Needles number 3.

Sequence of work

Performance:

With the main yarn, 47 sts are typed on the knitting needles. Rows 1-6 are performed with a standard elastic band (chrome, 1 ip, 1 hp).
Find and mark the center with a knitting marker (24th p.). Continue to work with a finishing thread: chrome, * 1 ip, 1 l.p., 1 ip, 1 p. transferred to the knitting needle, (do not knit, thread at work) * - then repeat from * to * to the center. Before the marked loop, a yarn is made, the central one is removed, another yarn is made, and a row is knitted by analogy with the first half. Wrong side you need to knit the way the picture looks, the removed loops are also transferred (not knitted), the thread is left before work. Before the central loop and after it, yarn overs are also performed, while the yarn overs from the previous front row are knitted with a crossed front one.
Again they switch to the main yarn: chrome., * 1 ip, 1 l.p. transfer (thread at work), 1 and. p., 1 l. n. * - repeat from * to * to the center. The central loop is knitted with the front one, crochets are also performed before and after it. Knit to the end of the row in the same pattern. The purl row is performed by analogy with the previous one.
According to the described principle, 14 subsequent rows are repeated, alternating the main and finishing threads.
They proceed to knitting the sole: count the average 15 points, mark with markers. They are knitted with the main yarn with an elastic band according to the pattern up to the central 15 p. They are also knitted with an elastic band, the extreme loop and the first from the side row are knitted at the same time. The work is being expanded. Knit 14 sts according to the drawing, knit the last loop simultaneously with the first from the side row, then the work needs to be turned around again. They continue to knit according to this principle, as a result, only 15 sts should remain on the knitting needles.
Heel. On both sides of the central 15 sts, 16 sts are collected from the hem. The heel is formed according to the same principle as the sole, i.e. you need to knit two loops at the same time from each edge, until only 15 loops remain on the knitting needles again. Close the loops. Using a hook, hide the tails of the cut threads, decorate as desired.

Children's slippers on two spokes

In winter and autumn, it is especially important to make sure that the feet of the kids are always warm - both at home and on the street. Track slippers will ideally cope with this task, besides, you can knit them according to the above pattern on two knitting needles in just one evening. Calculations are given for slippers for a child up to a year.

For knitting you will need:

Children's wool or acrylic yarn- 60 g of the main color, 30 g of another color for finishing.
Needles number 3.
Hook.

Sequence of work

Performance:

Any of the above knitting patterns for slippers on two knitting needles can be taken as the basis of your work, and the size can be varied depending on your needs, adding or subtracting the number of loops and rows.

The same can be said about the design of knitted slippers: color solutions, variations on the theme of patterns and decor have no limits. Knitting is creative process, which brings not only practical benefits, but also pleasure.

Video: knitting, slippers on two knitting needles

How to knit slippers without seams, video tutorial:

Traces on two knitting needles, see the video clip:

Indoor slippers will be especially warm and cozy for you and your family. hand knitted. Agree that a thing that is done by one's own hands is saturated positive energy and the warmth of the craftswoman. Each novice needlewoman in the field of knitting will be able to make slippers for the whole family with her own hands without any problems.

To help knitters, this article was created, in which you can find free high-quality knitting patterns for warm and cozy slippers using knitting needles for beginners and experienced craftswomen, descriptions for them, as well as training video tutorials. Look through all the options presented, choose the one you like, and you can start to “conjure” over the knitting needles and the ball.

A lazy version of knitting slippers with knitting needles with patterns

The photo shows a model made with two knitting needles, which can be knitted not just by beginner knitters, but even by those who just picked up knitting needles today and mastered the technology of knitting facial loops. To perform this version of home shoes, you don’t need to know anything else, which is why they are called “lazy”, since for their implementation special efforts and knowledge is not required. Watch the following tutorial and see for yourself. At first glance, these house slippers do not look very attractive, but on the leg they look pretty.

Step-by-step master class with description and photo

The entire piece is garter st (all sts in all rows are knit). Cast on 14 sts and knit 14 rows. Then pick up another 14 sts on the needle (= 28 sts).

Product assembly: to assemble the lazy slippers, see the following step by step photos.

You can change the size of the product in the way of a larger or smaller set of loops.

Model created quickly and easily on two needles

Knitting slippers on 2 knitting needles is a fast and interesting process. Especially if the model of indoor shoes is original and unusual. Look at the next photo.

How do you like these "dwarf slippers"? They can't help but like it. And working on their creation is a real pleasure. They knit in the same breath. In the evening, you can definitely complete a couple of such slippers, or maybe two. This model will look very bright and fun if you knit it from multi-colored threads, at the same time there is a use for the remnants of yarn. You can decorate slippers with pompoms, tassels or knitted appliqués.

In a similar way, and are created, try to knit them with your own hands!

Introductory information for everyone

Product size: 35-37. Foot length: 22 cm. For knitting, you will need 100% wool yarn (36 m / 100 g) - 100 g, knitting needles No. 10.

Gauge: 8 sts of pearl pattern = 10 cm wide.

Pearl pattern:

1 row: * 1 person., 1 out. *, repeat from * - *.

Row 2: Knit on purl stitches and purl on facial loops.

3rd and all subsequent rows knit as the 2nd row.

Additions: perform additions on faces. side of the work, making 1 yarn over. In the next row, knit a crochet behind the back wall.

Step-by-step instructions with a description of the work

Knit in straight and reverse rows, starting from the toe. While casting on, leave the end of the thread for sewing slippers about 30 cm long.

On the knitting needles, dial 8 p. 4 persons., 1 yarn. 2 persons. (= 10 p.). Knit 1 row in purl. side of the front p. Next, perform additions in the next row in this way: 4 persons., 1 yarn over. 2 persons., 1 yarn, 4 persons. (= 12 p.). Link 1 out. a row of facial sts. Continue working on all loops pearl pattern.

Knit the product to a height of 9 cm. Then dial 9 new sts at the end of the next 2 p. (= 30 p.). Continue knitting on all loops with a pearl pattern. Knit at a height of 21 cm next persons. a row in this way: 9 persons., turn the work, knit a reverse row. Next, cast off the 1st 21 sts (= 9 sts on needle). Knit 2 rows on these loops and finish knitting.

Having mastered this simple knitting technique, you can move on to something more complex. For example, try linking .

How can you assemble the finished product yourself

Assembling the product: stretch the thread through 8 p. of the typesetting row, pull off the sock and sew the product edge to edge along the central upper part of the leg, leaving an open section 6 cm long from the top. Next, sew together the edges of the slippers in the center of the back edge to edge.

A wonderful product according to the Japanese method with a photo

Looking at the next photo, it is unlikely that any of you will remain indifferent to these wonderful slippers.

This model is connected by Japanese technology. Read the description and look at the step by step photos. Everything is quite simple and clear. Knitting such a model of indoor shoes is a fascinating process, and the result is obvious.

Description of knitting for needlework beginners

Dial 40 sts on the needles with a thread in 2 additions and knit with an elastic band 2x2 18 cm.

Then knit straight for 20 rows. Close loops.

From the other edge of the gum, pick up 40 sts on the knitting needles and knit a garter stitch with decreases in the same way as on the opposite side. Get this detail.

Fold the finished knitted piece in half and sew on the sides (where the elastic band is 2x2).

Final result:

If you do not know what gift to give to children, read - you will definitely like it!

We create children's slippers according to an interesting lesson for everyone

Knitting baby slippers can be turned into real magic that will take place in front of your beloved child. Not just a knitted fabric will come out from under the knitting needles, but a cute and beautiful mouse or hare, or maybe even a pig. "How?" - you ask. And it's very simple. next master the class will tell you how to knit such shoes in the form of animals.

The description is given for such “mouse slippers”, but you can decorate them as you wish under any other animal. Believe me, your child will wear such house shoes with great desire and pleasure.

Product size: 25-26. For work, you will need wool / acrylic yarn - 100 g, leftover yarn for decoration, knitting needles No. 3, hook No. 3.

Detailed MK for beginners in knitting

Cast on 28 sts on needles and work rib 1x1 (*knit 1, purl 1 *) 4 cm (= 12 rows).
Next, knit the product. satin stitch.
To form the heel, divide the work into 3 knitting needles (on the extreme knitting needles, 10 sts each, on the central knitting needle, 8 sts).
Next, perform only the middle part, knitting at the end of each row on each side the last loop together with the 1st st of the extreme knitting needle, thereby gradually reducing the number of loops from the extreme knitting needles.
When turning the work, the 1st p. of the middle part does not need to be knitted, remove it like an edge. Thus, knit until there are no loops left on the extreme knitting needles.
Next, knit in a circle: there are 8 sts on one knitting needle, on the 2nd knitting needle from the side of the gum, lift 10 sts, on the 3rd knitting needle, type 10 additional sts, on the 4th - 8 sts on the side rubber bands.
Continue knitting circular rows persons. loops 6 cm. After 6-7 cm, perform 2 sts together at the beginning of each knitting needle.
When 1 stitch remains on the needles, knit them together. Cut the thread and fasten to the inside. side of work.
Crochet the eyes and nose with matching threads.
For knitting ears, dial 3 air. n. and knit as follows:
1 row: 2 tbsp. b / n.,
2nd row: 3 tbsp. b / n.,
3rd row: 4 tbsp. b/n.
Sew the ears to the slippers.

Small "mouse slippers" are ready not only to warm the baby's leg, but also to play with him.

Video lesson with diagrams

Here are such simple and affordable models of home slippers that can appear on your shoe shelf. And if your household will have a choice about which slippers to give preference to - factory-made or knitted by your hands, then the answer to this question is obvious. So hurry up to please your most dear and beloved people with a beautiful, comfortable and a warm gift- watch our video tutorial and start working miracles!

Easy implementation of "knitted" ideas for you!