Crocheted snowman: photo, description, diagram. How to knit a snowman - a New Year's toy

Toys self made Can't compare with store bought ones. We put so much care and warmth into them!

IN winter period time, I want to do something that will be associated with winter and snow. Therefore, today we will tell you how to crochet a snowman, the diagram is provided.

Making a medium snowman No. 1

Crocheted snowman pattern:

1. Very soft white yarn, which is called YarnArt Dolce.
2. The yarn is regular blue, black and orange.
3. Beads for eyes.
4. Hook III mm and II mm.
5. Filler.
6. Needle.

Step-by-step production

How to crochet a snowman, knitting pattern:

1. Take soft white yarn and a III mm hook. We start our knitting with an amigurumi ring. And we knit the first row of 6 single crochets. We tighten it. Now we will make an increase. To begin with, to complete the amigurumi ring, we do connecting post.
2. Now in each loop we make an increase in the form of II single crochet columns. As a result, we get 12 loops.
3. Third row. We make an increase again, starting with the first column without a crochet, then the second, then again one - and so on until the end of the row. This makes 18 loops.
4. The next row is 2nd double yo, and in the next stitch, increase. We do this again 6 times until the end of the row. And it turns out 24 loops in a circle.
5. Now it’s already the third single crochet, and in the next column we make an increase. There are 30 loops in the circle.
6. Next - by analogy, already IV single crochet, then increase. Result - 36 loops.
7. In the next row we knit a V sc, then increase. Makes 42 loops.
8. Our next action is that we simply (without increases) knit V rows of 42 stitches. In total we get 210 loops. That is, we knit 210 sc in a row.
9. The next step is decreases.
10. Five - sc and I decrease. The output is 36 loops instead of 42.
11. Four - sc and I decrease. Yield: 30 loops.
12. Three - sc and I decrease. Output - 24 loops.
13. Two - sc and I decrease. Exit - 18.
14. Next, we make one connecting loop and cut off the thread. The lower part of our snowman's body is ready.

Now let's make the handles

Crocheted snowman - manufacturing diagram:

1. Take a thick needle and thick black thread.
2. We thread a thread and a needle into the fifth row from the inside. We go down three rows and thread the needle and thread back.
3. Now we bring the thread out again (two rows below the previous stitch and at a slant towards the center). And we make a second stitch, threading the thread inside (through the end of the first stitch). The handle itself, consisting of two parts, is ready.
4. Now let's make the fingers. Doing three small stitches from the handle in the same way.
5. We make the second handle in exactly the same way as the first. We fasten the thread from the inside into a knot.

Let's start with the snowman's head

How to crochet a snowman? The knitting pattern is as follows:

1. We start knitting the head, like the body, from an amigurumi ring. Next 6 loops. They delayed it. Connecting post.
2. Then a row with increases.
3. III row - 1sc, 1 increase. Exit - 18.
4. IV row -2sc, increase. Exit - 24.
5. V row - 3sc, increase. Exit - 30.
6. VI row - 4 sc, increase. Exit - 36.
7. Next we knit 4 rows of 36 single crochets.
8. This makes 144 loops.
9. Now we are going downhill.
10. XI row - 4sc, decrease. Yield: 30 loops.
11. XII row - 3sc, decrease. Output - 24 loops.
12. XIII row - 2 sc, decrease. The output is 18 loops.
13. We make a connecting loop. We leave a piece of thread long enough to then use it to attach the snowman’s head to the body.

Let's start with the snowman's face

How to crochet a snowman? Scheme for beginners:

1. Using black beads we make eyes. To do this you just need to sew them on.
2. Next, again, we take a thick black thread and a needle and “sew” the eyebrows and mouth of our snowman.
3. To make a carrot nose, take orange yarn and hook No. 2.
4. Making an amigurumi ring. 5 sc will go into it. We tighten it.
5. We knit a connecting post.
6. Now row 2 - 1 sc, increase. Exit - 7.
7. III row - 7 sc.
8. We are going down.
9. Row IX - 1 sc, decrease.
10. V row - 5sc.
11. Row VI - decrease, 1 sc, decrease.
12. We make a connecting column.
13. Cut the thread longer. Let's pull it out. Now we sew the nose to the snowman. To do this, take a needle and thread the remaining “tail” from the spout into it. We pass the needle and thread along the entire spout and bring it out through the amigurumi ring. Then, using the same thread, we sew the carrot nose to the face of our snowman.
14. The face is ready.
15. We fill the body and head of the snowman with filler.
16. To attach the head to the body, take the thread remaining after knitting the head, thread it into a needle and pass it through a loop in the body. And so in a circle you sew the head to the body.

Knitting a scarf for a snowman

Crocheted snowman, diagram and description:

1. Take blue yarn and hook No. 2. Cast on 80 chain stitches. It looks like a braid.
2. Now from the second loop we begin to knit a single crochet stitch. When knitted to the end, we make the second column using the same principle.
3. The scarf is ready. We wrap it around the snowman's neck. Can be secured with a small brooch.
4. The snowman is ready.

Making a little snowman No. 2

How to crochet a snowman? Diagram and description - present detailed diagram crochet a little snowman. In order to connect it, we need:

1. The yarn is white.
2. Hook.
3. Super glue.
4. Beady eyes.
5. Needle.
6. Scissors.
7. Kinder surprise capsule.

We do everything the same as in the previous example.

Detailed diagram of how to crochet a snowman:

1. We make a medium-sized amigurumi ring and 1 row of 6 sc.
2. Row II - increase for each stitch. Exit - 12.
3. III row - 1 increase, 1 sc. The output is 18 loops.
4. IV row - 1 increase, 2 sc. Output - 24 loops.
5. And so on. The number of columns depends on the thickness of the yarn. You simply apply a Kinder capsule and see if your circle is wide enough. The circle should be slightly larger than the size of the capsule.
6. Next you knit 24 stitches in each row. You need to knit as many such rows as required in height.
7. In order not to confuse the front and back sides, we focus on the “tail” of the amigurumi ring. That is, where the tail is, there is the wrong side.
8. Since we used Annabelle yarn, we needed to knit 11 rows.
9. Cut the thread and pull it up. We insert the thread into the needle and bring it to the wrong side. We make a securing knot, draw a needle under the posts and cut the thread at the root. Everything is described here - how to crochet a snowman, step-by-step diagram.
10. We also attach the tail from the amigurumi ring.
11. We have created a kind of case for a Kinder Surprise capsule. It covers a little more than half.
12. In the same way we knit a cover for bottom part capsules. It consists of 9 rows. You look at your yarn. The main thing is that there is no distance left at the junction.
13. Now let's start decorating the face. Using beads or black rhinestones and glue, we make eyes. If desired, you can embroider the eyes with thread.
14. For a smile we take black yarn and a needle. We make a few stitches and the mouth is ready. From the wrong side we make a securing knot.
15. You can use blush to decorate your cheeks.

Let's make a hat for a snowman

How to crochet a little snowman? The knitting pattern is simple. To do this, you can take yarn of any color.

We knit it according to this pattern:

• Row 1 - middle amigurumi ring, 4 sc in it.
• Row II - 6 sc, increase after 1 sc.
• Row III - 9 sc, increase after 1 sc.
• IV row - 12 sc, increase after 2 sc.
• V row - 12 sc.
• VI row - 18 sbn, increase after 1 sbn.
• VII row - 18 sc.
• VIII row - 24 sbn, increase after 2 sbn.
• IX row - 24 sc.
• X row - 30 sc, increase after 3 sc.
• XI row - 30sc.
• XII row - 30 sc.

Step-by-step instruction

How to crochet a snowman? The knitting pattern is as follows:

1. When you finish the 12th row, which has 30 single crochets, you can add another color. For example, white. To do this, we put on a thread from the yarn white on your finger, like working thread, and the last, connecting column, we do this way: we place the hook under the loops, grab the white thread and make the last movement in white. Now comes the lifting loop - we knit 30 single crochets for back wall loops. At the end we make a connecting post and secure the thread. To do this we cut off pink thread and white, we tie them together in two knots.
2. To make the edge of the cap more voluminous, using the same white thread, without a lifting loop, we immediately make a double crochet loop and place the hook from below behind the half-loop that runs along the edge of the top color (where we attached the white color).
3. That is, we make a yarn over, draw it from the bottom up under the half loop, pick up and pull out the working thread (there are 3 elements on the hook) and knit them in pairs, making a regular double crochet stitch. Then we make a regular double crochet loop.
4. Thus, we tie the entire hat, making 30 single crochet stitches. At the end we make a connecting column. It turns out to be a very interesting harness. Of course, you can do without it, but it looks more impressive with it. If you push the edge of the cap apart with your hands, you will see that the edges are separated. To avoid this, you can simply sew them together using a thread and a needle.
5. The hat is ready.
6. To make a pompom for it, take a ruler and wrap it with white thread in a circle at one end. The more yarn you wind in this way, the fluffier your pompom will be. Carefully remove the skein from the ruler. Now we will tie this skein in the middle with a piece of white yarn. We tighten it as tightly as possible so that the pompom does not fall apart later. It will be better if you make a few turns and knots.
7. Take scissors and cut the two sides of the skein with them. We fluff the skein and sew it to the hat with the same thread that remained after tying it.
8. We make the scarf by analogy with the first example. Thus, we have a small snowman consisting of collapsible parts. If you wish, you can connect them together.

Conclusion

Today you can find a lot step-by-step schemes and descriptions of how to crochet a snowman. The knitting pattern is presented in each description, including for beginners. We, in turn, have described for you two patterns for crocheting a snowman. Have a nice time!

Such snowman can be New Year's surprise, Christmas tree toy, keychain. It consists of several parts. If the snowman is made as a keychain, then all parts must be fastened together. To create a shape, you can use padding polyester or other filler. But we will use a Kinder Surprise capsule as a base.

Materials and tools:

Yarn 100% acrylic, approximately 200 m in 100 grams. Hook number 3.5 and a thin hook for tying in the loose ends of the threads. For knitting you will need two colors of yarn: white and pink.

You can choose the second color as you wish. A capsule for creating a shape, scissors, beads or half-beads for the eyes.

Abbreviations used in the text:

VP – air loop;

runway - air lift loop;

Dc – double crochet;

DC – double column;

RLS – single crochet.

Beautiful knitted snowman. Master Class

We start knitting the product from the center. We perform the Amigurumi ring. It was invented by Japanese knitters for little ones. knitted toys amigurumi. We call it sliding or magic ring: we lay the white thread so that the end of the thread is in the palm of the hand, and wrap the working thread around index finger(from ourselves), insert the hook into the formed ring, pick up the working thread and, pulling the loop into the ring, knit a chain loop. The ring is fixed and work can begin.

1 row. We knit 6 sc on the ring.

We close the row of columns with a connecting loop in 1 single crochet. Tighten the ring by pulling the free end.

2nd row. 1 runway. We knit 2 sc into each loop of the previous row. We close the row to the first runway. There should be 12 stitches in the row.

3rd row. 1 runway. **2 sc in one loop of the previous row (that is, double stitch), 1 sc**. Repeat until the end of the row. There should be 18 stitches in the row. We close the row to the first runway.

4 row. 1 runway. We knit the entire row without any additions using single crochets. We close the row with a connecting loop.

We knit the 5th, 6th, 7th, 8th rows similarly to the fourth.

If you knit with thinner yarn, the number of loops in a row can be increased to 24. And along the height of the “head”, knit enough rows to reach the place where the capsule connects.

We cut the thread and secure it with a thinner hook or needle, if that is more convenient for you.

We knit the lower part of the snowman in the same way as the upper one, only 6 rows, not 8.

The body of the snowman is ready and you can decorate the face. At the level between the sixth and seventh rows of the “head” we will attach beady eyes. You can glue it with Moment glue, but I prefer to sew it on, because... The glue leaves marks, no matter how carefully you glue it. I marked the smile with Chamomile yarn.

Let's start knitting a hat. Using pink yarn we make an amigurumi ring and secure it with one air loop.

1 row. We knit 4 sc.

We close the row with a connecting loop, tightening the ring tightly.

2nd row. 1 runway, US, 1 sc, US, 1 sc. We close the row with a connecting loop. It turned out 6 RLS.

3rd row. 1 runway. DC, 1 sc, DC, 1 sc, DC, 1 sc. We close the row with a connecting loop. It turned out 9 RLS.

4 row. 1 runway,**US, 1 sc, 1 sc**. We closed the row with a connecting loop. There were 12 sc in the row.

Row 5. 1 runway, **US, 1 sc** repeat until the end of the row. We close the row with a connecting loop. There were 18 sc in the row.

6, 7, 8, we knit rows of 18 RLS. We cut the thread and fasten it.

9 row. Insert white thread. We knit single crochets behind the back wall of the loop.

10 row. We knit with regular single crochets on both sides of the loop.

11 row. We knit a DC using the rib from the front walls of the loops of the last pink row. We insert the hook from the bottom.

12 row. We tied the white edge of the cap.

But the edge consists of two parts: the lower part from the sc, and the upper part from the sc.

Both of these layers need to be connected. We knit a row of connecting loops, inserting the hook under both parts of the loops of the top and bottom row.

There is one more piece left to knit - the scarf. To do this, we will dial 60 VP and knit two rows of single crochets. Cut the thread and thread it with a thin hook. Connected all the details. All that remains is to assemble the snowman.

The cap can be decorated with a tassel or pompom.

New Year's souvenir is ready!

The master class was prepared by Svetlana Chalkina.

Beautiful crocheted snowman for the New Year. Master Class

Probably many people have already prepared Santa Clauses and Snow Maidens for the New Year. It's time to complement them with a festive snowman. You can knit it yourself using a hook. Crocheted snowman for the New Year will make a great gift.

• Yarn (red, white, gray, orange);
• Hook;
• Needle;
• Sintepon;
• Button.

Crocheted snowman - master class

We begin to knit the most basic part - the body. We knit six single crochets into a sliding loop. And we knit five more rows with increases. In each row we must knit six increases. And we will get thirty-six columns. We knit four rows. After this there are four more rows with four decreases in each of these rows. And next time we'll make six decreases.

Let's move on to knitting the second ball. To do this, we make six increments in three rows. We knit four rows. In the next three rows we will have four decreases. And two more have six. Next, we make decreases in each loop until the hole is closed.

Let's tie the legs. For this we take gray yarn. We knit six stitches into the amigurumi ring and add six more stitches in the next two rows. After this, we make four decreases in two rows.

First, let's decide on the middle. This point will allow you to place your hands and carrot nose symmetrically. On the 11th row we mark a small dot anywhere. We retreat 7 loops in right side and knit with blue thread: 3 loops from below - 2 loops up - 3 loops to the left - 2 loops down. The result is a miniature circle. We knit another row of single crochets and close the loops, pulling them together. Using the same principle, we make the second hand. Only from the middle we retreat to the left.

Making the nose

On the 16th row at the midpoint (just draw a straight line up from the 11th row) with an orange thread we knit, as in the case of hands, 1 loop - 1 loop up - 1 loop to the left and 1 loop down. On the second row we knit in single crochets with 4 loops in three. On the next row, from 3 loops we make one and close it off, tightening the thread and hiding it. The spout is ready.

Let's draw acrylic paints smile. Glue the eyes using hot glue. We tie a scarf. Merry is ready!

New Year's crafts. Crocheted snowman. Master class with step-by-step photos

I present to your consideration a craft - . Product purpose: toy, didactic manual, a toy for the theater, a part for decorating the interior for the holiday. Goal: make a toy with your own hands.

Necessary materials and equipment for:

• threads white and pink, yellow, red
• hook 2.5
• bead eyes
• lollipop sticks
• homemade broom made of brown threads
• scissors
• threads
• needle

Master class on crocheting a snowman.

We cast on 4 air loops, close them into a ring, and knit with a double crochet in each loop. We continue to knit 2 double crochets in each stitch. We knit 3 cm. After this we begin to decrease, knit through 1 loop 1 cm with 1 crochet.

It turns out to be a ball. We put pieces of cotton wool inside. This is the torso. We knit the head in the same way, only we cast on 3 air loops, close them in a ring, and knit with a double crochet in each loop. Next we add in each loop. We knit 2 cm - we get a head.

We embroider a smile and sew on beady eyes.

Panicle. Cotton swab wrap with brown thread, glue 3 cm threads. Crochet snowman ready.

Crocheted snowman for the New Year. Master class with step-by-step photos

Hello. In this master class I want to show you how to crochet funny snowman . It is very simple to make, even a beginner knitter can handle it. So, let's go!

Rows 6-10: no changes.
Row 11: * 3 sc, decrease *. Repeat * 6 times.
Row 12: * 2 sc, decrease *. Repeat * 6 times. Fill with filler.
Row 13: * increase, 2 sc *. Repeat * 6 times.
Row 14: *inc, 3 sc*. Repeat * 6 times.
Row 15: no changes.
Row 16: * increase, 4 sc *. Repeat * 6 times.
Row 17: no changes.
Row 18: * increase, 5 sc *. Repeat * 6 times.
Rows 19-29: no changes.
Break the thread and fasten.

Base.

1st row: cast on 2 VP and knit 6 sc in the second loop from the hook.
2nd row: * increase *. Repeat * 6 times.
3rd row: * increase, 1 sbn *. Repeat * 6 times.
4th row: * increase, 2 sc*. Repeat * 6 times.
Row 5: * increase, 3 sc *. Repeat * 6 times.
Row 6: * increase, 4 sc *. Repeat * 6 times.
Row 7: * increase, 5 sc *. Repeat * 6 times.
Leave a long thread for sewing to the body.

We knit in rows only for the back loop, not forgetting to make 1 lifting loop in each row.
First color: ch 15.
1st row: starting from the second loop from the hook we knit 14 sc (14)
2nd row: 14 sc
Second color:
3-4 rows: 14 sc
First color - rows 5-6: 14 sc
repeat this way up to row 38 inclusive. You can do a little more if it suddenly doesn’t fit on the snowman’s head.
Row 39: 14 sc, on the 40th row connect the edges of the hat, knitting only one loop. Leave long end thread, pull it through top edge and tighten.
Ribbon for hat: 30 ch

We knit only the back wall of the loop. Second color: ch 61, turn, starting from the second loop 60 sc, turn another 60

Carrot nose.

Hook No. 1, cotton (knitted from base to tip): ch 2, 6 sc, 1 row - increase 6 times (12), 2-6 - 12 sc (12), 7 row - (sc, decrease) * 4 times. Fasten the thread and hide the tail. Stuff the snowman's head and body with padding polyester and sew on the base.

This is what I got. Happy knitting!

I'm with the snowman.

You can simply make a snowman with your own hands, or you can knit such a young lady with light note glamor and shocking. Not all snowmen have a bucket and a broom.

I knitted sequins and threads and my soul rushed to heaven.

For such a snowman girl you will need:
Threads: acrylic white and blue.

A little red thread for the nose, black floss for the eyes and mouth, and a sequin ribbon for decoration. Holofiber for filling.

Tools:
Knitting needles No. 2, 1.8, needle for stitching.
Now let’s learn more about how to knit a snowman with knitting needles.

We increase from the bottom loop of the previous row.
Decrease – knit 2 stitches together.
All loops are face loops, except for the handbag.

Torso.
White thread
Row 1 – cast on 6 stitches

Funny snowmen. Height 10 cm, yarn “Children's Novelty”, hook 1.5mm, buttons (3mm) and beads for eyes were also used. The main color is white. Accessories can be made in any color.

• Introductory article to knitting amigurumi. Basic techniques and simple toys.

Description of the toy:

sc - single crochet

Head:

2р: 6 increases (12)




7-10r: knit without increases (36)
11r: 4 sc + decrease, repeat 6 times (30)
12p: 3 sc + decrease, repeat 6 times (24)
13r: 2 sc + decrease, repeat 6 times (18)
14r: 1 sc + decrease, repeat 6 times (12)
15r: 6 decreases
Fill tightly with padding polyester.
The hole that remains to be tightened with a needle.

Body:
1p: 6sc in amigurumi ring (6)
2р: 6 increases (12)
3p: 1 sc + 1 increase, repeat 6 times (18)
4p: 2 sc + 1 increase, repeat 6 times (24)
5p: 3 sc + 1 increase, repeat 6 times (30)
6p: 4 sc + 1 increase, repeat 6 times (36)
7p: 5 sc + 1 increase, repeat 6 times (42)
8p: 6 sc + 1 increase, repeat 6 times (48)
9p: 7 sc + 1 increase, repeat 6 times (54)
10-12r: knit without changes (54)
13r: 7 sc + 1 decrease, repeat 6 times
14r: 6 sc + 1 decrease, repeat 6 times
15r: 5 sc + 1 decrease, repeat 6 times
16r: 4 sc + 1 decrease, repeat 6 times
17r: 3 sc + 1 decrease, repeat 6 times
18r: 2 sc + 1 decrease, repeat 6 times
19r: 1 sc + 1 decrease, repeat 6 times
20r: 6 decreases.
Fill tightly with padding polyester.
The hole that remains to be tightened with a needle.

Hands (2 parts)
We begin to knit with colored thread.
1p: 6sc in amigurumi ring
2р: 6 increases (12)
3-5r: knit without changes (12)
Change the thread to white
Row 6: 1sc + 1 decrease, repeat 4 times (8)
7-10r: knit without changes (8)
Lightly stuff with padding polyester.

Nose
We knit with orange thread.
1p: 5 sc in amigurumi ring
2-4r: knit without changes.
No need to stuff your nose.
Leave a long thread for sewing.

Scarf
We knit with colored thread.
1p: a chain of 6 chain loops, 1 sc in the 2nd loop from the hook, and one sc in the next 4 loops. Turn knitting.
2-50r: one lifting chain loop, and one sc in each base loop.

A cap
We start knitting from the crown.
1p: 6 sc in amigurumi ring.
2р: 6 increases (12)
3p: 1 sc + 1 increase, repeat 6 times (18)
4p: 2 sc + 1 increase, repeat 6 times (24)
5p: knit without changes (24)
6p: 3 sc + 1 increase, repeat 6 times (30)
7p: knit without changes (30)
8p: 4 sc + 1 increase, repeat 6 times (36)
9-12r: knit without changes.

Pompon
I did it as in the picture.

Sew the pompom to the hat. Fasten the hat on your head. Sew on the nose.
Sew the head and arms to the body. Wrap the scarf around your neck and tie. Sew bead eyes and buttons on the body, embroider a smile with thread.
And that's it, the snowman is ready!

In that step-by-step master class you will find a photo, diagram and description of crocheting a snowman in amigurumi style.

A symbolic toy suitable for decorating an interior, Christmas tree, festive table. After all, this is one of the brightest symbols of the New Year after Father Frost and the Snow Maiden. A knitted snowman is a welcome gift not only for a child, but also for an adult. Prepare many gifts in advance for friends, colleagues, relatives, package them beautifully and put them aside until important moment. The lesson is designed for beginners.

Knitting materials

If suddenly you don’t know how to knit at all, then sew or. And be sure to do it under the Christmas tree. Little things like this create a holiday!

By the way, you don’t have to buy yarn. Take a closer look at things that have gone out of fashion; if they are in good condition, then dismantle them and put them to use.

To knit a plush amigurumi snowman, prepare:

• yarn “baby elise softy” in blue and blue colors;
• red denim yarn;
• hook No. 2;
• two black beads for eyes;
• needle and thread;
• a red bead on a stem (or without a stem);
• padding polyester or cotton wool for stuffing toys;
• scissors.

How to crochet a snowman

For reference: - this is japanese art knitting small soft toys crochet Most often these are animals and humanoid creatures. But in Lately This technique is used to knit everything possible: food, dishes and much more.

Use blue yarn to hook onto four air loops and lock them into a ring.

• 1st row - increases in each loop;
• 2 – increases every 2 loops;
• 3 – increases every 4 loops and so on.

You will get something like this, a circle slightly curved at the edges.

Continue knitting single crochets, but already no additions or decreases. So knit three rows.

Continue closing the knitting until it is completely closed.

Crochet the second snowman ball (the head) halfway in the same way as the body, only a little smaller in size.

Fill with padding polyester, but do not cover completely.

Sew the snowman's head to the body with blue or blue threads so that the seams are invisible.

Now we need to prepare small parts. To knit a hat, from red yarn, cast on four air loops, close them into a ring.

Knit the first two rows with single crochets with increases in each row; in the third row, make increases every three loops, and starting from the row, increase only twice.

This will fold the knitting around the edges, creating the shape of a hat.

To link scarf, cast on a chain of 40 chain stitches from red yarn.

Work one row of double crochet stitches. The scarf for the amigurumi snowman is ready.

To link felt boots, from the same yarn, cast on five air loops. Knit st. Single crochet on both sides of the chain, making three additions at the ends. Finish the row with a connecting post.

Make an air loop for lifting. Insert the hook into the back portion of the loop closest to it. Work a single crochet stitch. Next loop too. And so on until the end of the row.

As soon as a small hole remains, work single crochets in the round without increasing or decreasing. And so 3-4 rows. Knit a second felt boot.

Pompom for a hat crochet it according to the description of the snowman’s body, but in a much smaller size.

Mitten knit as follows: cast on four air loops, close them in a ring, knit two rows of single crochets, making additions in each loop.

Sew all the parts to the body crocheted snowman. When sewing on the eyes, try to tighten the thread tightly so that the beads are “recessed” into the plush and not on its surface. Don't forget to tie the thread in a knot.

Would you like to tell your friends how to crochet a beautiful snowman? Share the link on in social networks or send it directly.

Do you want to know how to knit? crochet snowman, and also manufactured by others no less in interesting ways, then you will like this publication.

Since ancient times, this fabulous snow character has been one of the attributes not only of winter, but also of the brightest, most cheerful and long-awaited winter holiday- New Year. Therefore, as it approaches, these become very relevant. A snowman can be an excellent decoration for a Christmas tree, complement holiday decor interior or act as New Year's gift, what use to find for it is up to you, but we want to tell you in detail, using the example of our master classes, how to crochet a snowman and not only. So, let's begin.

Crochet a snowman

Snowman applique.

Let's start from the very beginning simple option creating a fabulous snow man in the form knitted applique. Such original decor may well decorate winter sweater both a child and an adult, and it can also be used to create New Year's cards, additions carnival costume or as unusual Christmas decorations. Considering that making such a craft is not at all difficult, you can even try to knit a whole family of funny snowmen and make an unusual garland out of them.

To work we will need:

Wool blend or acrylic yarn white;

Colored yarn;

Crochet hook;

Sewing needle with a wide eye.

Crochet snowman: description

Such a figurine can consist of either two or three round parts. different sizes, this is optional, we will tell you how to create a craft based on two snowballs.

1. Take white yarn, form the first air loop from it, which we then tie in a circle with the first row of single crochets or single crochets, this is according to your desire.

2. We knit the piece in the round, making even increments in each row so that the workpiece turns out correct form and flat. The circle knitting pattern below will help you with this.

Snowman crochet pattern

3. According to the principle of the snowman’s structure, we make one part larger - this will be the torso of our hero, and the second smaller one, for the head.

4. We sew both finished parts together manually using a needle and thread of a suitable color.

5. We also manually embroider the eyes, mouth, and nose on the hero’s face with a needle.

7. As for the hands, they can be made in several ways, in the form of small lumps, knitted according to the same principle as the main parts, in a circle or like tree branches. You can also knit tiny mittens and put them on your hands.

This is how you can very quickly, easily and simply make a simple Snowman. All that remains is to find a use for the finished snow hero.

Using this knitted appliqué idea, you can make a very original sofa cushion that both adults and children will surely like, and it’s also so decorative element interior, will make everyone feel festive winter mood and can act as a manufactured .

Knitting the pillow itself is not at all difficult; to do this, you need to decide on the size of the pillowcase and first knit a chain of air loops of the appropriate size, then make a fabric of single crochets in straight and reverse rows. In this case, all rows must be the same, without any additions or decreases. The second part of the pillowcase is knitted using the same principle.

At the end, all that remains is to connect both halves of the pillowcase, insert a pillow into it and decorate it with an original snowman applique.

Openwork crocheted snowman

The next version of a knitted snowman is more of a decorative character; you are unlikely to be able to play with such a craft, but it will be an excellent decoration on or under the New Year tree. This work uses the technique fillet knitting, thanks to which the craft turns out light, delicate, almost weightless.

To work we will need:

Cotton mercerized fine yarn white;

Thin satin ribbons;

Crochet hook No. 0.9

Crochet snowman: diagram and description

1. All openwork snowman clumps consist of two parts, each of which we will knit separately. So, for the first part, we will collect a chain consisting of 6 air loops and close them into a ring using a regular connecting post.

3. Then we knit 1 double crochet into the previously formed ring and again 2 chain stitches, and also repeat knitting the entire row in a circle. There should be 6 repetitions. We end this row, like all subsequent ones, with a connecting column.

4. We knit the 2nd row, just like the first, with three chain lifting loops, after which we perform 1 double crochet in the first lifting loop and 3 chain stitches.

5. After this, we form 2 double crochets from the next column of the previous row and 3 chain loops. We knit this way in a circle 6 times.

7. All other halves for each openwork ball are made using the same principle, only in different sizes; the diagrams included with the master class will help you do this correctly.

8. We also need to separately knit a hat for our snow character. To make it, we initially have to knit a chain of 8 air loops and close them into a ring.

9. In the first row we perform 1 chain lifting loop and then tie the ring in a circle with single crochets, there should be 23 of them in total. Let's finish the row with a connecting column.

10. Now we perform 1 lifting loop and immediately 4 more of the same chain stitches, knit 1 single crochet into the second column of the bottom row and add 4 chain stitches. loops. Next we knit according to the pattern.

11. To form a figurine from the manufactured parts, we need to starch each part well. To do this, you can use a concentrated solution of ordinary starch, PVA glue or granulated sugar, preparing a thick syrup from it and water in a one-to-one ratio. Wet starched parts must be placed on a suitable round base, for example, children's plastic balls for a dry pool or balloons, and leave it like that until completely dry and hardening.

12. Then the parts of each of the balls should be sewn or glued together into separate lumps and decorated with thin satin ribbons, stretching them between the openwork holes of fillet knitting and forming small neat bows.

13. The next step is to connect all the balls into a finished figurine, put on the snowman’s hat and decorate it with ribbons.

Openwork knitted snowman crochet

We hope you found our master classes offered above accessible and understandable, but if you still have any questions about performing such work, you can always reinforce your knowledge with video tutorials that you can easily find on the Internet. To do this, you just need to enter the phrase in any search service: “Crochet snowman video” or similar to it, and all possible information, will be brought to your attention.

Snowman toy made from a sock.

How to do it crochet snowman different ways, you are already familiar, however, as we promised at the beginning of the article, this is far from the only way make a snow man with your own hands, you can also sew it on the basis of ordinary socks. At first glance, this may seem strange, to say the least, but it’s worth trying and you will see what a wonderful toy you can get.

So, for work we need:

A pair of white knitted socks;

Artificial filler or regular cotton wool;

Sewing needle and bobbin thread;

Scissors;

Colored small buttons;

Small beads;

A piece of colored fabric;

White stationery erasers.

Description of work.

1. To begin, turn one of the socks inside out and tighten the outer toe part tightly with several turns of rubber band.

2. Then turn the sock inside out front side and fill its third part with artificial filler, for example, padding polyester or ordinary cotton wool.

4. We continue to stuff the toy, this time we will need half less filler, because we are forming the head of a snowman, we also fix it on top with tight turns of rubber band. The extra part of the sock hanging over last row elastic bands, carefully cut off.

5. Using a needle and thread, sew eyes and a nose on the snowman from small beads, and bright buttons on the body.

6. Based on the second sock, we will make a hat and decorate it with a small decorative pompom, made from a piece of bright fabric, and put toys on your head.

7. We also cut out from bright shred scarf and tie it around the figurine’s neck.

That's all, the toy snowman made from socks is ready. Isn't it cute? fairy tale hero did it work out? What other options for such a toy can be made with your own hands are presented below in a small photo selection.

Snowman made of threads.

Another original version creating a funny snow man, the hero of many New Year's stories- based regular threads. Looking at such a toy for the first time, it may seem that it is extremely difficult to make and will require a lot of effort, time and materials. In fact, this is not the case, and everything is quite easy, simple and accessible; you just need to understand the technique for doing all the work and you can start creating such a craft.

To work we will need:

White cotton threads;

Tube of PVA glue;

Large sewing needle (“gypsy”);

Balloon;

Colored paper;

Scissors.

Description of work.

1. Let's start by inflating balloons; we will need 2-3 of them to work, depending on how many lumps we want our snowman to consist of. Like real lumps, all our balls should be of different sizes - larger for the body and smaller for the head.

2. As you already understand, the balloons will be the temporary basis of the parts of our toy; it is on them that we will wind many turns of cotton thread, but first it needs to be soaked in PVA glue. This can be done in several ways, but the most successful of them, allowing you to spend the least amount of time and at the same time not stain anything, is the next one. We thread the edge of the skein of thread into the eye of a large sewing needle, which we then pierce through the plastic tube of glue. Thus, the thread passing through the tube will be abundantly saturated with glue, which is what we need.

4. Then carefully pierce balloon needle and remove from each lump.

5. In the end, from the resulting lumps, all we have to do is form a snowman and decorate it using colored fabric, paper, thread, etc., and you can find what to make the snowman’s nose from.