Crochet summer baby beret. Crochet children's berets with patterns for girls and boys. Crochet beret for a girl for summer, spring, autumn: diagram, pattern and description

The presented summer crochet beret for a child is suitable for a girl 2-6 months old. If you want to knit such a beret for a teenager 9 - 12 years old, then take thicker yarn and hook number 2.

Required:

Thread “Iris” - 60 g;
hook;
scissors.

Let's start knitting:

1. Start knitting.
We dial 7 v. loops and connect them. Next, we knit all the rows in a spiral. We knit 15 single crochets. (Photo 1) Insert a hook into each loop and alternately knit a stitch with 1 stitch. and 2 ch (Photo 2) We perform the next row in each loop of the column with simple single crochets. Next we perform five vp. through 5 loops. It turns out 8 arches. (Photo 3)

2. We knit rays.
To do this, you need to knit 3 vp. and an even number of double crochets, namely 8 pieces, in each arch. We finish the row (photo 4, photo 5).

Next, we knit 6 loops, first chain and then double crochet. (Photo 6)

Row 7: 4 columns with n., and twice 6 v.p. So until the end. (Photo 7)

Row 8: 2 double stitches, three in. item 2 columns. with nak., six air. p, two pillars. with nak. three air p., and so all the actions from the beginning. (Photos 8 and 9)

9th: 4 columns with n., 6 in. p., then 9 single crochets, and so we finish the row. (Photos 10 and 11)

Row 10: three sts. with inc., 3 air. n, three treble dc, 6 vp, 7 dc without dc, 6 dc. let's continue the same way.
Row 11: three sts. s n., three v.p., 1 tbsp. with nac., three vp, 1 tbsp. with nak., three air items, 3 tbsp. with nac., six vp, 5 tbsp. without nak., six vp and all from the beginning.
Row 12: knit three sts. with nak., then 5 arches, like the previous row, three tbsp. with nak., six vp, three tbsp. without pressure, six air p., repeat. (Photos 12 and 13)

13th: everything is the same, only we knit 7 arches, and we pick the ray into 1 single crochet column.

3. Knitting the side part.
Note! In order for a summer crochet beret for a child to turn out with a smooth side part, it is necessary to correctly perform the decreases. If you decrease the loops too sharply, the beret will turn out angular and not deep. Well, if this part of the beret is knitted too long, it will turn out to be deep and sloping, which does not correspond to the name “beret”, rather a “hat”.
We continue knitting with double crochets, in each loop, for the entire next row. (Photo 14)

Row 15 is knitted in a herringbone pattern, i.e., one at a time. There should be exactly 9 Christmas trees, each drawing has an arch. (Photo 15)

We knit the next row in the same way, only in the same way. should be knitted already 2. (Photos 16 and 17)

17th: Air. We knit three loops in a herringbone pattern.
We knit the next three rows in a herringbone pattern consisting of two columns with a single stitch and 1 ch. We place the drawing on top of each other. (Photo 18)

We knit the 21st, 22nd and 23rd rows with a single herringbone pattern. (Photos 19 and 20)

We perform the next four rows with simple stitches, i.e. single crochet, shifting each row by one stitch.

4. We finish the summer beret with a crochet hook for the child.
We knit the last four rows in single crochets. We cut the thread and tie a strong knot, burying the ends. (Photo 21,22,23,24)

So our wonderful beret “Red Sun” is ready. This beret will go with a variety of your child's outfits, and the gorgeous openwork pattern will make your little one stand out from the crowd. (After all, every mother wants this.) Knit and try new things. Improve yourself!

Children's beret hand tied mothers are the most best decoration for the little fashionista. Such a headdress not only looks beautiful, but also performs an extremely important function - it protects the head from overheating and sunstroke. In this article we will tell you how to crochet a beret for a girl with your own hands with diagrams and descriptions. The master classes presented below will be divided by age, but this does not mean that this product will not be suitable for your child, you will just need to recalculate the size and amount of material.

Openwork for baby

In this master class we want to tell you how to knit openwork beret ik for the little beauty. The lesson is simple, suitable for beginners in needlework.

The size here is designed for a 2 year old child, if you want to make it for an older child, use more loops.

You will need:

Cotton threads with a density of 200 g/50 m;
Hook No. 2;
Hook No. 2.5.

First, we put 90 loops on the hook (if you are making it for a child over two years old, you will need more loops, but their number should be a multiple of six).

Using the fan pattern, we knit 5 tbsp. s/n., rapport is equal to six loops. We knit a circle of the required diameter, in this case we will need repeat pattern three times. Next, we make decreases according to the scheme:

Using a needle and a thread threaded through it, we go through the loops of the outermost row and tighten the crown. Our beret is ready.

Another variant

Now we will tell you how to knit an equally cute beret that is suitable for the summer, like the previous one, but with a different pattern.

First, we’ll tell you how to correctly calculate the size of your future headdress. The most important thing is to take the measurements correctly: the measuring tape should be drawn 2 centimeters above the eyebrow line, behind the ear, in a circle through the most protruding area of the back of the head.

When you measure the head volume, you need to divide it by 2. For example, if you are knitting a beret for a 3-year-old child whose head circumference is 51, your formula will look like this: 50/2 = 25.5. Or use this table (the numbers are approximate, you need to proceed from the size of a particular person).

To work you will need:

Thin acrylic yarn(50 grams);
Hook.

Carefully inspect the pattern, check whether the yarn you have chosen is suitable in thickness.

Cast on 4 chain stitches and close them into a circle.

Now we knit as indicated in the pattern, you should get it as in the photo.

Tie the circle with three rows of double crochets. The diameter of the resulting circle should be 24 centimeters.

Now gradually increase the number of columns, to do this, link every second column with the previous one, do this with a double crochet. Thus, the volume will decrease gradually.

Now we knit the mesh. To do this, cast on a double crochet and chain stitch and connect it with a double crochet and chain stitch from the previous row. Knit five rows like this (if necessary, from 4 to 7 rows).

Below is a mesh knitting pattern:

The beret is ready, you can decorate it with flowers, beads, and embroidery.

Mischievous "Sailor"

Sometimes you want to do something unusual for your daughter, all these ruffles, flowers and butterflies are already boring, in this case such a playful “Sailor” beret would be an excellent choice.

This particular instruction and description is designed for a 4-year-old girl, but it can be made smaller or larger.

You will need:

Cotton beach 400 m/100 g (50 g white, the rest is blue and red);
Hook No. 2.

Work process. Cast on 6 chain stitches with white thread and close them in a circle. Next, we knit according to pattern 1 until your circle becomes 30 centimeters in diameter.

Then we knit a single crochet with blue threads, making decreases (5 loops, 7 loops, 10 loops) in a circle to the required head circumference. Next, we knit with a blue thread of 1.5-2 cm in a single crochet and without decreases.

Tie the edges of the beret in one row with a single crochet. The diameter of the beret is approximately 31-32 centimeters. Now link Lifebuoy white and red yarn according to pattern 2. Sew it to the beret; you can also decorate the beret with a blue pompom, so it will turn out even more interesting.

The result is a very unusual and cute headdress that your child will definitely like. Here are some other interesting options for berets in this style:

Video on the topic of the article

These are, of course, all the options for berets for girls that can be crocheted, don’t be afraid to experiment, stores sell very beautiful hats, but none compare to those made by caring people with my mother's hands, it’s more pleasant to wear this way, and you can make it taking into account individual characteristics and your child's wishes. Perhaps watching the video materials with which we conclude our article will help you get inspired.

Beret is a stylish headdress. You can knit it yourself using a knitting tool such as a crochet hook. This article offers many interesting schemes knitting a beret using different techniques.

Crochet allows you to create products of incredible beauty. The hook is a tool of “fine work” and therefore every loop connected with it is very skillful and neat. Crochet beret Even novice craftsmen can do it. All you need is yarn and knitting.

Video master classes from experienced craftsmen, of whom there are many on the Internet, will help you master the art of crocheting.

Beret - very feminine headdress, which will not only warm, but also decorate the head of its owner. The beret can be worn at any time of the year, even in summer, hiding your head from sun rays.

Simple scheme

Crochet summer beret for a woman: diagram

Scheme simple knitting № 2

Simple knitting pattern No. 3

Beret with crochet visor: diagram and description

Beret with visor- this is a stylish headdress that can complement the look modern woman. You can knit a beret like this from light or heavy yarn, decorate with various patterns and decorative elements(flowers, ribbons, brooch).

Scheme No. 1

Scheme No. 2

Scheme No. 3

Crochet a snowball: diagram and description

Takes a “snowball” - this is voluminous headdress, which will warm you up in the cold season. It is not difficult to knit, and the result is a “lush” product that can fit well on the head of any woman.

You can decorate the “snowball” beret using a bubo or any other decorative element.

Example of a finished product

Detailed diagram

Crochet winter berets: diagram and description

Beret - warm headdress, if worn correctly, it will cover the ears, back of the head and temples. Moreover, he is so looks impressive on the head, which always successfully complements a woman’s image, adding elegance and sophistication to it.

A winter beret should be knitted from coarse yarn, which contains wool thread.

Scheme No. 1

Scheme No. 2

Scheme No. 3

Crochet from thick yarn: diagram and description

A beret knitted from thick yarn will help keep your head warm during the cold season. This product looks very voluminous on the head. It is easy to knit; knitting does not take much time due to the creation of large loops.

Warm crochet beret: diagram and description

Warm beret can be knitted from large or wool yarn. Its knitting is distinguished by a fairly dense arrangement of loops. You can also decorate a warm beret with curly knitting: braids, cones, columns.

Scheme No. 1

Scheme No. 2

Scheme No. 3

Crochet from sectional yarn: diagram and description

Sectional yarn is different in that one thread can have several color shades , radically different from each other. As a result, the product is bright, colorful and very effective.

Scheme No. 1

Scheme No. 2

Takes with embossed crochet posts: diagram and description

Knitting in a column will help create a product that will sit tightly on the head and look very voluminous. Stitch knitting is basic and not difficult for a beginner to master.

Knitting in a column

How to knit a stitch?

Relief column, beret

White crochet beret: diagram

White takes skillfully decorates a woman's head. A white headdress can be combined with almost any wardrobe. You can knit a white beret from any thread for spring or winter.

Simple circuits

More complex openwork pattern

Crochet with cones: diagram and description

Knitting with cones allows you to create a headdress that will look very voluminous and impressive. Mastering the knitting technique is not difficult, relying on detailed diagrams.

Scheme No. 1

Scheme No. 2

Simple classic crochet beret: pattern

The classic beret has magical property making a woman a sophisticated person. This beret goes perfectly with a coat, short coat, raincoat and jacket. It can be worn at any time of the year, combined with stoles or scarves around the neck.

Classic scheme

Volumetric crochet beret: diagram and description

A voluminous beret will definitely attract the attention of others, as it can, without crimping the styling, sit tightly on your head and keep warm. You can knit a voluminous beret from large yarn and even from ordinary threads.

Volumetric bret, diagram

Crochet star pattern: diagram and description

Star pattern- one of the most beautiful, with which you can also knit a beret. Such a product will not only be beautiful, but also original.

How to knit a star pattern?

Beret with a star pattern

Crochet beret and snood: diagram and description

Snood - modern scarf sitting like a collar on his head. It matches perfectly with the beret, creating a wonderful, sophisticated look.

Beret pattern with snood

The beret is a universal headdress that is little subject to the whims of fashion. It can make the whole image sound new, which is why fashion designers willingly use this detail in their collections. However, it is not at all necessary to buy a couture headdress: even those who are just learning the basics of needlework can knit an original piece.

And crocheted berets, the patterns of which are clear even to a beginner, will be a wonderful addition to your wardrobe.

Features of beret knitting technology

The birthplace of berets is France. Moreover, initially it was a headdress for male citizens, and then a mandatory part of the military uniform. Over time, women picked up the tradition of wearing berets, appreciating their convenience: in the cold season they warm their heads, and in the summer heat they protect them from the sun's rays. In addition, such headdresses look great on little girls, making them look like dolls. Thus, there are many reasons to master the technology of knitting this wardrobe item.

If you want to know all the features of knitting berets, then first you should take into account some of the nuances of choosing yarn:

for berets, as a rule, synthetic threads are used: they hold their shape well and do not stretch;
on average, a beret takes about 200 g of yarn;
depending on the pattern of the model, the thickness of the yarn is selected: the more voluminous the pattern, the thicker the threads should be;
openwork patterns on berets look better if the yarn is not too thin;
it is better to make a double band from thin threads (the part that holds the headdress on the head);
For a baby beret, you can use cotton threads.

Before you begin to scrutinize how to crochet a beret, you need to choose not only the model, but also the hook itself. Its thickness depends on the thickness of the yarn, but hook No. 4 is considered optimal - it is convenient to knit with both thin threads and denser ones.

Things knitted with openwork are always at the height of fashion, and berets are no exception in this sense. Such airy, light patterns look especially good on hats. In addition, they are very functional: in autumn and spring bad weather it is already hot in a warm hat, but a beret is quite appropriate. The most universal model is the “track” pattern. If such a model is knitted from thin threads, then the product will turn out to be “in a hole”, but on denser threads it looks quite dense and convex. In order to knit such a beret, we need:

50 g wool threads;
hook number 4.

We start working with 16 double crochets closed in a circle.
We knit the second row with connecting loops.
Add 4 air loops evenly. We knit 2 more rows. We close each row connecting post.
We start the next row with two connecting stitches, then yarn over the second of these stitches and add 2 stitches. We also knit all the loops of the row. Next we follow the diagram.
In the next rows, we knit not 2, but 3 loops with a connecting post, so that the connection points are not visible in the figure.
After knitting 14 rows, we begin to lower the loops.
When finishing knitting, we make 3 single crochets - this is our band.
We close the last loop and hide its end on the wrong side of the product. The beret is ready.

Read also: We make a chain of 6 air loops. We close them in a ring.

We knit 3 lifting loops, then 19 double crochets.

Again we make a lift of 3 air loops. Then 3 chain stitches, 2 double crochets. We alternate the 3+2 scheme.

We knit a yarn over into each previous stitch. And we complete the row with a connecting column.

Next we knit according to the pattern up to row 30.

Let's start decreasing. 3 rows, decreasing every 5 stitches, but keeping yarn overs in the stitches.

The next row is the same decreases, we do not save the yarn overs.

The last row of the pattern is single crochet and dec.

We finish with 3 rows of band. In our case, this is 5 single crochets. The beret is ready.

Other crochet beret models

Openwork drawings are good because they practically do not limit your imagination. The only thing you should not forget about is scrupulous stitch counting. Don't rely on the extra stitch being hidden in the next row. This will make the drawing “float”. Therefore there is universal model a beret for those who do not like to work with numbers, which negates the likelihood of extra loops appearing. The pattern consists of alternating stitches with and without double crochets (1X1). We need to prepare:

80 g yarn;
hook No. 3.5.

We close 16 loops into a ring, knit them with single crochets.
We start the next row with 3 lifting loops. Subsequent rows will also begin with lifting loops.
We alternate double crochet and single crochet. We get a mesh.
On the 25th row we begin to decrease the loops. 5 in every other row for 10 rows.
We knit 3 cm of the band with single crochets. The beret is ready.

This model can be decorated with embroidery or a brooch, which will add elegance and elegance to the headdress.

One of the most popular hats for girls is the summer beret. It is most convenient to crochet it, as it takes round shape. And circular crochet is easy. Crocheting berets for girls is a fascinating activity. In just a couple of evenings you can knit a beautiful beret for either spring or summer.

Summer berets are lighter, openwork. Berets for spring are knitted more dense pattern and warmer threads. The beginning and middle of spring are often cool, which means you can sew a lining for such a beret.

Before you start knitting a beret, you need to learn the basics and features of knitting this headdress. As we have already said, the base of the beret is a circle. It is called the bottom. In the table you can see approximate dimensions for the beret.

But before crocheting a beret, be sure to check the head size of the child for whom you will crochet it. To check the diameter of the beret, you need to place it on a flat surface. Knitting in the round is achieved by uniformly adding stitches throughout the knitting pattern. Then the product naturally will expand.

The next part of the beret is called the walls. They are knitted without adding stitches and usually reach a height of 3-10 cm.

After the walls, part of the decreases begins. It is smaller than the walls - from two to four centimeters.

And the last part is the band. Its height is from 1 to 10 cm. This part of the beret must correspond to the size of the head and thanks to it the beret will fit well. If your band turned out to be too wide, then you can knit it with a crochet hook of a smaller number and, conversely, if it turned out to be too narrow, then use a crochet hook of a larger number.

You need to take measurements correctly. To do this, the measuring tape should pass 2 cm above the eyebrows, just above the ear and through the most protruding point of the back of the head.

Beretik for a girl for the summer, diagram with description

For the summer you can crochet a very beautiful openwork beret. It is knitted according to the pattern. Even for beginner knitters, there will be no questions. This summer beret in the photo is designed for a 2-year-old girl. To knit a larger summer beret for the summer, you need to cast on a larger number of loops.

You will need:

Holly threads or any other, preferably cotton (200 g/50 m);
hook No. 2.5 and No. 2.

Size: head volume 45-47.

Description

We start knitting with a set of loops - 90 pcs or another number, but a multiple of 6. You can cast on with an elastic set. The diagram is below.

Then one row of double crochets. We knit the next four rows in a circle with relief stitches, alternating knit and purl stitches.

To do this, you need to knit the pattern according to the pattern about 3 times. Then we reduce according to the scheme.

We thread the needle, go through the loops of the last row and tighten the crown. A beautiful summer beret for a girl is ready!

Beret for a girl for the summer with a floral pattern

The knitting pattern for such a light beret is very simple and will suit even a beginner knitter. For knitting summer berets, it is better to use natural threads, such as cotton.

You will need:

cotton yarn;
hook.

Description

We start knitting with a set of air loops in multiples of 6. This is necessary for knitting rapport. If you knit according to the pattern, then you only need to knit one row with a single crochet. If you want a taller band, knit a little more. After you have tied the band, you need to knit the next row with arches of 3 VPs. That is, there are 2 arches for 6 loops. The next row is RLS and arches of 3 VPs (diagram).

Openwork summer beret for girls

Such an openwork summer beret will come in handy for any little girl and even her mother)

You will need:

cotton yarn (400 m, 100 g);
hook No. 1,3.

Description

You need to start knitting from the bottom. To do this, we collect 6 VP. 1st row - we tie a chain chain of 16 dc and knit according to the pattern, taking into account what diameter of the bottom is required. The diagrams are shown below.

Openwork beret – video master class

Beret and scarf for spring or autumn for a girl

In cool spring weather, a warm beret will come in handy. In addition to it, you can knit a scarf to make a beautiful set. When you read the diagram, this kit is knitted very simply.

You will need:

Vita Brilliant yarn (380m/100g);
hook No. 1.75.

Description

We begin to knit the bottom. To do this, focusing on the diagram, we knit a circle of the required diameter. If the head circumference is 50 centimeters, then the diameter is 25 centimeters (50/2).

We collect a chain of 12 VPs and close it in a circle.

1st r. – 3 VP lifting + 11 SSN.

2nd r. – 3 VP lifting + 22 CCH (2 in 1 CCH of the previous row).

We continue according to the scheme.

Having reached the desired diameter, we knit two rows without increases or decreases. Then we begin to decrease - in each wedge we knit two double crochets together once. After approximately 3-4 rows of decreases, the size will become equal to the circumference of the head. Then we begin to knit the band. We knit, alternating convex and concave DCs, like an elastic band. Knit as much as you think is necessary - 3-7 cm. The beret is ready for spring!

The scarf is knitted according to the pattern.

Beret for a girl for spring or autumn

A beautiful and easy-to-make beret for a girl. It is knitted according to the pattern and can be decorated with a knitted flower.

You will need:

yarn “Semenovskaya” (392m/100g);
hook No. 2.

Size: for head circumference 48 cm.

Description

We knit the bottom according to the pattern - diameter 24 cm (about 16 rows). We knit the next 4 rows without any additions (these are the walls). We begin to decrease - we knit 2 dcs together in each wedge once. Reduce to the desired head circumference. We knit the next row with dc. We knit the next few rows with sc to the desired height. The edge can be tied.

Initially, headdresses shaped like berets were worn by tribes living in Central and Western Europe. Until the 17th century, berets were actively used to create an image that was fashionable at that time. Women decorated them with feathers, rhinestones and embroidery. For men, the beret has become part of military attire. Nowadays, this headdress can be sewn or knitted. It is appropriate to wear it at any time of the year. In summer, a beret knitted with thin threads will protect from the sun. In spring and autumn it will protect from the cold. How to crochet a beret? The diagram and description of the sequence of actions are given below.

How to determine the size of the future beret?

Just as with any thing, before starting to make a beret, it is necessary to clearly determine its initial dimensions. If for sewing clothes you need to find out the circumference of the waist, chest, hips and other things, then here you need to measure:

Head circumference;

Using a polymer centimeter, measure the widest part of the head. To do this, the tape is wrapped from a point on the forehead (on the bridge of the nose) to the most protruding bone on the back of the head and back.

depth of the headdress;

It is measured across the top of the head from the lobe of one ear to the lobe of the other. The measured value is divided in half.

Preliminary preparation for knitting

Beginning needlewomen are always eager to get to work quickly in the hope that the result will surprise you from the first minutes. Will surprise. Not with the best side. All the work will go down the drain if you don’t first determine the degree of stretch and shrinkage of the yarn. The threads that will be used for knitting may have different properties. If you do not take them into account, the finished headdress may be two sizes too large. Therefore, before crocheting a beret, you need to make a sample. Sample photos of what they look like are below:

The sample should be a small copy of the knitting pattern for the beret itself. With its help, the needlewoman will understand how many loops are needed to adjust the width and diameter of the product. The size of the resulting piece should be 10x10 cm or larger. After knitting, the sample is washed, dried and ironed. With such processing, it will become clear how a product knitted from such yarn will behave. When the sample takes its final shape, you need to calculate from it how many loops fit into a piece measuring 1x1 cm. By multiplying the resulting number by the value of the head circumference and the depth of the headdress, you get the estimated number of loops for knitting.

Patterns that are used when knitting berets can be found in any thematic magazines or catalogs. Here are some of them:

How to crochet a beret?

As soon as you have it in your hands suitable scheme and all measurements are taken, it’s time to start knitting. The beret is knitted in four stages:

knitting the bottom (the part that will cover the back of the head and crown). All the work will consist of tying the base ring in a circle with gradually adding loops and increasing the diameter of the product;
knitting a flat part that will smooth out the bend of the beret;
decreasing the loops to the size of the head circumference. Now everything happens in the reverse order, the number of loops is reduced at the same points where they were added while knitting the bottom;
knitting elastic bands. As soon as the lower edge of the beret begins to fit the head and forehead, an elastic band is knitted, thanks to which the headdress will not slip off.

The resulting product can be decorated to your taste. Beads, buttons, ribbons, knitted “donuts” and so on can be used as decoration. But even without additional decoration, a beret can look very elegant.

Is it possible to knit a beret for a child?

On girls, berets look very neat and interesting. Many mothers knit on their own beautiful dresses, in which the child will be comfortable. Crocheting a beret for a girl is no more difficult than for adult woman. All stages of knitting are followed in the same sequence as described above. The result may be something like this:

Usually mothers use soft yarn for knitting, which will not irritate the baby’s skin. Children, especially small ones, are very particular about their comfort. If the head and ears itch from the hard thread, it will be impossible to force the child to wear even the most colorful and fashionable of all berets. The feminine “I’ll die, but I’ll still wear it” doesn’t work yet. If possible, you need to pay attention to the composition of the yarn, which indicates wrapping paper.

If half of the contents are wool and the other half are acrylic, you can safely take the yarn. Products made from it are warm, do not stretch and look great in any pattern.

By the way, it is not necessary to crochet a baby beret. For those with the right skills, there are knitting patterns available. The result in this case is no worse.

Video on the topic of the article

Summer has come! This means that we will face a huge number of hot days, with scorching sun and cool, sometimes rainy nights. But no weather should be an obstacle to looking stylish.

In the summer, you want to not only look beautiful, but also feel comfortable in your clothes, and especially in hats. Designers from many countries use berets in their collections. Now women's summer berets are very popular. In fashion boutiques you can find a huge number of summer berets different styles and colors. But nothing beats something made with your own hands. With the help of yarn and your limitless imagination, it is possible to create your own individual and incomparable summer beret.

Knitting an original summer beret is very simple. Due to the variety of materials, knitting and patterns, a women's summer beret will complement your look with a bright and matching component of your wardrobe. A crocheted beret is a beautiful element of the image that makes the outfit whole and complete. It will draw attention to you and emphasize your individual style.

Crochet summer beret, models from our website

The classic, black and white version of a large beret and a small shawl will allow you to use the beret both as protection from the sun and as a detail of an evening dress. The shawl can be used to cover your shoulders from the sun or the evening cool, or use it as a pareo

To make the dress and beret, 400 g of black cotton thread “Kable” 400m/100g, a skein of braid with glued beads, and a 2.0 hook were used. For a product according to this description, you can use any yarn, thin and thick, cotton and synthetic,

Hello, dear craftswomen! What a drug this is - knitting! I wanted to take a little break from knitting and direct my energy in a different direction, but I couldn’t switch. I saw the beret and couldn’t do anything, again

I think that this white beret is known to almost everyone who crochets. It was published in Fashion Magazine. So I didn’t pass by. Crocheted number 1 from thin threads, so it turned out to be slightly smaller in diameter than

Hello, dear needlewomen! Ah, summer, summer...... it's time to show off your work on your body! New job mine is a summer beret in the style of Irish lace. Idea by Zoya Leporskaya from Fashion Magazine No. 541. Knitted from leftover yarn. Flowers,

Hello, dear needlewomen! I tied the beret. He waited a long time for his time. I have had a series of such berets. I took the idea from Fashion Magazine No. 535. Author Tatyana Prokhorenko. Yarn: 100% mercerized cotton 280 m in 50 grams, hook 1.0

Summer beret "Lily", 100% cotton. Knitted according to the attached pattern. The work begins from a chain of 6 chain stitches and is tied with 16 double crochets, then according to the pattern. Hook No. 2, Yarn Art Violet thread. Beret knitting pattern:

Summer beret made of thin cotton for a girl. The beret is made according to the presented scheme, last rows in the diagram you can adjust it yourself (knit or not depending on the desired circle). I didn’t make the border according to the pattern - I liked it that way.

For knitting, use 100 g of Yarn Art cotton yarn, hook No. 1. I knit the bottom of the beret according to the pattern up to a diameter of 30 cm, then without adding arches from 6 vp. 4 cm, then decrease to the required size - head circumference.

Good afternoon I present to your attention light openwork beret. Summer is coming, and such a beret will protect your head from the burning rays of the sun. Knitted from Turkish yarn "Violet" - 282 m / 50 g, hook No. 1.75. I used 1 skein -

Warm beret knitted using the Irish lace technique. The threads used were Alize (gold batik), Linete (angora). Motifs were knitted according to the following patterns: leaf, caterpillar, flower: 1st stitch: 7 ch. in the ring, 2p. 1 v.p. rise, 17 st.b.n. knit into a ring, 3 r. 4 inch rise, *

Beret made using Irish lace technique. Made from "Iris" threads using crocheted size 1.0. It took 50.0 grams. Before this item, I had never knitted Irish lace, so I decided to start with a small item. Then curiosity got the better of me. And after that, I

The summer beret is crocheted from mercerized cotton "Pelican" with crochet size 1.25. A white hat elastic band is tied into the headband for better fixation on the head. Artwork by Nina Kolotilo. Crochet beret pattern:

All berets are knitted using the Irish lace technique. The yarn used is mainly "Diamond" 50% wool + 50% acrylic - 380m/100g, and "Alize" 100% microfiber - 300m/50g, hooks - "Clover" - 0.75; 0.9; 1.0. All elements can be found in the Journals

Crochet beret - the work of Nina Kolotilo. Takes colors dusty rose knitted with Irish lace. Size 56 - 58. Yarn for the elements - Anna-twist 500m/100g, for the mesh - also Anna-twist, but untwisted and the resulting thickness is 1000m/100g.

The author of the work is Elena Nikolaevna Trofimova, place of residence Perm region, Berezovsky district, village of Zaborye. I work as a teacher additional education- I lead the association “Magic Ball” - this is knitting and crocheting. Beret knitting pattern:

I am Kartoeva Milana Amirkhanovna, I study at school No. 12 in the 7th grade, I learned to knit in a club. I have been knitting for 8 months and have gained a lot of experience on this site. I live in the village of Inarki. I'm now

Due to numerous requests, Reseda sent a diagram for the beret. She knitted the beret to the end of the pineapple pattern, reduced the number of loops, and knitted the headband around the circumference of the head with a single crochet. I used hook number 2. Beret knitting pattern: See the handbag knitting pattern at
Good afternoon My name is Guzel Fattakhova, I have been crocheting for myself and to order for a little over 2 years. Once I already sent my work - a sexy tunic with a spider web. This time I decided to show my

My name is Trunova Irina. I live in the city of Michurinsk Tambov Region. I am 21 years old. I am a student at Michurinsky Agrarian University. I have been interested in knitting since childhood, as my grandmother was a dressmaker and knitter. Also

Takes from floral motifs - the work of Marina Milokumova. The non-trivial beret model is very relevant for the upcoming cold weather. Schemes from a Japanese magazine. Marina writes that connecting motifs takes some time and requires care. But she liked the result

This beret is crocheted based on the pattern from Mod magazine No. 470. Please note that the main motif is repeated twice by Tatyana. Yarn - iris, hook 1.25. The diagram is given for head size - 56. You will need about 100

Knitted berets are suitable for any age, be it a little girl, a girl or a woman. The beret is considered a classic in the world of hats and an element of French style.

A knitted beret looks very elegant on a little girl, especially if it is knitted from a thin thread. Such a take not only does not deliver discomfort child, but also perfectly protects against overheating and hypothermia. Also, by decorating the beret with beads, ribbons or other jewelry, you can combine it with different outfits and accessories.

Winter, summer, autumn. . . You can crochet a beret for any season. It will not be difficult for you to knit a beret from fluffy and thick yarn for the winter or thin and soft for the summer. Our product will help you vary the knitting density, patterns, size and color detailed description and diagrams. Even a beginner can cope with this task. You just have to be patient and be confident in your results. You can turn a skein of yarn into a work of art. We will make every effort to help you with this!

Crochet summer beret, models from the Internet

Summer openwork beret Ripe strawberries

Work by Irina Kachukova. Hook No. 1.75. Front side beret. Beret diameter = 28 cm. The diameter of the beret should be approximately equal to 1/2 of the head circumference, i.e. for size 56 (56 cm), the diameter of the pancake should be somewhere around 27-28 cm.

Beret pattern:

Summer Beret Rainbow

Work by Irina Kachukova. The beret is crocheted No. 1.5. Threads are mercerized cotton.

Summer beret Surf

Summer beret with daisies

Beret size: 56.

You will need: 100 g of white yarn (100% cotton, 530 m/100 g), 10 g of yellow yarn for the centers of flowers (100% cotton, 565 m/100 g), 15 g of light green yarn (80% polyamide, 20% metallic , 340m/90g) hook No. 1.2 for flowers and No. 0.9 for mesh; polystyrene foam (4 cm wide) covered with tape; pins with a bead at the end, 7th grade “Brother” knitting machine.

Crochet summer beret, job description

Before starting work, make a beret pattern; the outer circle (bottom) with a diameter of 28-30 cm and the inner circle with a diameter of the outer circle of 28-30 cm, the inner circle - 16-18 cm. The diameter of the inner circle is calculated as follows: the circumference of your head minus 2 cm for a tight fit, divided by 3, 14. If this is a standard head circumference (56-2): 3.14 = 17.2 cm.

So, the diameter of the small circle is about 16-18 cm. Tie together the elements: flowers (diagram 24, 24 a), leaves (diagram 24 b), leaves on branches (diagram 24 c). Ready elements lay out on the pattern with the wrong side up, making bouquet compositions (for an option, see diagram 24 g), secure with pins. Use polystyrene foam as a backing. Connect the bouquets together with an irregular grid in a circle (this is important), especially along the edge of the circle. Try to ensure that the mesh along the edges does not stretch into a line, but is in the form of rounded arches. Inside the circle, the knitting direction can be arbitrary. Thread the ends of the threads into the elements. Similarly, assemble the inner circle part.

Fold the two finished parts with the right sides facing each other and connect them together as follows: RLS with loop grip (under the arch), both parts, 5VP.
The seam should be movable and not tighten the fabric.

Knit the headband on a machine (“Braer” 7th grade on density 4) 20 loops stockinette stitch 230-240 rows from “Iris”. It can be knitted on thin knitting needles by calculating the density yourself.

Tie the headband in the same way as you connected the beret parts. Sew the ends of the headband knitted seam. The rim itself will curl beautifully into a roll. You can fix it at the place where the ends are sewn together.

Beret pattern:

Summer crochet video

Summer openwork beret for beginners part 1

Size: 56-58.
Yarn: baby cotton gazzal (225m/100g).
Hook No. 2.5.

Summer openwork beret for beginners part 2

A very simple crochet beret pattern

Beret size: 56-58. Yarn Pekhorka Pearl (425m/100g), 50% cotton, 50% viscose. Hook No. 1.5-2.

Crochet berets are a must-have for any woman or girl's wardrobe. Moreover, not only in the cold season: in the summer they will protect our hair from ultraviolet rays, and in the fall and winter this headdress will warm us from the frost.

Crochet beret – very exciting work, especially if you choose beautiful yarn. Of course, it may take more time to complete it if you are new to this matter. But thanks clear diagrams and a detailed description, any beginner can knit the simplest beret in a couple of hours! Below you will find crochet berets for women with descriptions and patterns for free.

Crochet beret - description and diagram

On the street already autumn, but it’s not yet so cold to wear beautiful winter headdress, so we invite you to consider new models of knitted berets for this cool time of year. You don't even need to take off and measure your head circumference - crocheting allows you to try on products while working.

So, first you need to decide which one you want and from what material.. Can choose cotton or acrylic for this season. In general - the most best material– cotton, because it warms but allows your head to breathe. And this is an excellent choice for a child. In addition, you can choose the color of the future product ( blue, red, black, yellow), model ( with pompom, regular, with mesh, original Rastafarian), yarn ( from thick, thin). For beginners, we suggest doing without decoration; ours will help them with this. step by step description knitting sag.

We offer little master– class on knitting a beret from a thin white thread (cotton 100%). This white beret (made from snowball yarn) will not leave anyone indifferent! It is very airy, easy to knit, you can finish the work within an hour if you read and understand the diagram with the description correctly.

Beret: how to crochet?

Crocheting a beret for beginners has a detailed description. The knitting should be voluminous, and try on the size step by step. Take 100 grams of yarn in two colors: pink and gray. Next, select two hooks: No. 3.5 and No. 3. You can print out the diagram in advance if you are not comfortable reading it from the website. This way, the needlework can be marked on the sheet: which row you are knitting, how many cm are left, where and when to change the color of the thread. Crochet: diagram and description for beginners:

Summer, spring and autumn crochet berets

If you want to do women's berets: spring, classic summer and light autumn - you won’t have to look long, there are such products in our article! Be fashionable and beautiful all year round! The master class below will help you with this.

Crochet for spring for women: 250 grams of angora, hook No. 4.5 - 5.

A new summer trend - a pink openwork beret for real fashionistas and their children! It is somewhat reminiscent of the “mesh” pattern from the descriptions above. The diagram will tell you in detail how to correctly knit such a work of art! The pattern of this model is very reminiscent of a star or a flower.
Crochet summer beret for a woman: diagram:

A long-awaited option for autumn made from warmer yarn and denser knitting, because... we will perform it with a double thread and big hook at number 4.

How to crochet a beret for beginners: video

Crocheted women's berets with patterns and descriptions: photo 2018

Below they are waiting for you crochet berets for women- the best and fashion photo selection 2018. Buy or knit the most fashion models hats this season!

Crocheted berets with patterns and descriptions: new warm models

Will need melange yarn for such a cute hat(the diagram can be downloaded for free) and hook No. 3.5.
Dial chain 5 V.P. close in a ring. Knit S.S.N. along the agricultural sector in a circle to a diameter of 22 cm. To do this, make additions until this goal is achieved. Next - 19 cm in straight knit. Last 6 R. – S.S.N. , and 7 R. - “crawly step”.

Crochet hats and berets for beginners master class: video

Master class from Lilia Ulyanova - classic beret and header:

Crochet beret for autumn 2018: diagram and description

In this MC the thread will alternate gray And fuchsia colors. The beret fits to the size of the head - 56 centimeters.
We don’t knit like a regular beret - With bottom edge – elastic bands gray tint. We perform a chain of 60 V.P. into the ring S.S. The serial number corresponds to the number of the circular row of the product.

1 V.P. lifting, 1 S.B.N. = 60 P.
60 P.
1 V.P., 1 S.B.N. in every S.T. to the end of R., finish S.S. = 60 P.
1 V.P., 1 S.B.N. in every S.T. to the end of R., finish S.S. = 60 P.
1 V.P., 1 S.B.N. in every S.T. to the end of R., finish S.S. = 60 P.
Hook No. 10 – fuchsia thread. 2 V.P., 1 semi S.S.N. – skip, half S.S.N to the end of R., close S.S. in 2 P. lifting.
Grey colour: repeat 6 R.
Fuchsia color: 2 V.P. lifting, 1 1 floor S.S.N. skip, semi S.S.N. (P.S.S.N.) in the next 12 S.T., (2 half S.T. with 1 vertex, 1 half S.S.N. in the next 13 S.T.) *2, 2 semi S.S.N. with a common top, S.S. in 2 P. rise.
Grey: 2 V.P., 1 semi S.S.N. skip, 11 semi S.S.N., (2 semi S.S.N. with a common top, 12 semi S.S.N.)*2. 2 semi S.S.N. with a common vertex, S.S. on the second P. rise = 52 P.
Fuchsia: 2 V.P. lifting, 1st floor S.S.N. skip, 1st half S.S.N. in every S.T. to the end R., S.S. in the second P. lifting.
Grey: 2 V.P., 1 semi S.S.N. skip, 10 half S.S.N., (2 half S.S.N. from the common top, 1 half S.S.N. in the next 11 S.T.)*2. 2 semi S.S.N. with a common vertex, S.S. in the second P. lifting.
Fuchsia: 2 V.P., 1 P.S.S.N. skip, 5 semi S.S.N., (2 P.S.S.N. with a common top, 6 P.S.S.N.)*4. 2 P.S.S.N. with a common vertex, S.S. in the 2nd P. rise.
Grey colour: 2 V.P., 1 P.S.S.N. skip, 4 P.S.S.N., (2 P.S.S.N. with a common top, 5 P.S.S.N.)*4. 2 P.S.S.N. with a common vertex, S.S. in the 2nd P. rise. = 36 P.
Fuchsia: 2 V.P., 1 P.S.S.N. skip, 3 P.S.S.N., (2 P.S.S.N. with a common top, 4 P.S.S.N.)*4. 2 P.S.S.N. with a common vertex, S.S. in the 2nd P. rise. = 30 P.
Grey colour: 2 V.P., 1 P.S.S.N. skip, 2 P.S.S.N., (2 P.S.S.N. with a common top, 3 P.S.S.N.)*4. 2 P.S.S.N. with a common vertex, S.S. in the 2nd P. rise. = 24 P.
Fuchsia: 2 V.P., 1 P.S.S.N. skip, 1 half S.S.N., (2 half S.S.N. with a common top, 2 half S.S.N.)*4. 2 semi S.S.N. with a common vertex, S.S. in the 2nd P. rise. = 18 P.
Grey colour: 2 V.P., 1 P.S.S.N. skip, (2 P.S.S.N. with a common top, 1 P.S.S.N.)*4. 2 semi S.S.N. with a common vertex, S.S. in the 2nd P. rise. = 12 P.
Fuchsia: 2 V.P., 1 P.S.S.N. skip, 11 P.S.S.N., 5 times 2 P.S.S.N. with a common top, skip 2 V.P. at the beginning of the circular R., S.S. to the first P.S.S.N. = 6 P.

The first thing you need to do before starting knitting is to choose a model. If the mother does this for small children, then teenage girls are already actively participating in such a pleasant event.

Yarn selection

Yarn for the beret is selected taking into account what time of year it is intended to be worn. For a warm winter beret for a girl, natural wool, mohair, or angora are suitable. IN autumn options It’s a good idea to use wool blend or synthetic yarn. For summer, you can take cotton or linen threads.

If you purchase moderately stiff threads, the product will hold its shape better. At the same time, the yarn should not be prickly, otherwise the young fashionista may refuse to wear a beret. For summer, you can buy soft, silky yarn, then the product will gently fall over your head.

Many mothers choose baby series threads, which are available from almost every manufacturer. Products knitted from such yarn do not cause unpleasant sensations when in contact with the skin. As for the color, it is usually matched to the tone or contrast of the jacket or coat.

Knitting needle selection

Typically, the recommended knitting needle number can be found on the knitting threads, as well as in the description of the model. There is another principle for choosing knitting needles: for any yarn, the thread in two folds should be equal to the thickness of the knitting needle. In this case, the result is a moderately dense fabric. But it’s still better to knit a small sample before starting work to visually see how the knitting will look. Each craftswoman has her own way of working: some knit more loosely, while others knit tighter.

How to link?

The beret of any model consists of three parts:

a rim that prevents the product from sliding over the eyes, but at the same time, it should not tightly squeeze the head;
main part;
bottom.

You can knit each part separately, but usually berets are knitted as one piece. The most important thing is to follow the order given in the description of the selected model while working.

For a beret for a girl, you can choose any pattern. You can knit a headdress with relief knitting, using braids or jacquard pattern, openwork or simple garter stitch. It can be decorated with applique, beads, etc.

Knitting beret for a girl

Over the years of the existence of our site, we have accumulated many types of berets for girls, both original and knitted from magazines. Introducing our selection!

interesting selection to the website Large selection openwork models

Children's set “Rainbow” - blouse and beret. Size 30. Made from sectional yarn openwork pattern“zigzags”, the edges are crocheted. The beret is collected on a ribbon, which allows you to adjust the size. Pattern diagram for the set: Explanations for the diagram: vertical line - faces. Work by Svetlana Shevchenko.

Knitted scarf and beret for a girl

My name is Elena. This is my first time on the site.. I knit only when absolutely necessary, as I had to do yesterday. My mom taught me to knit when I was 6 years old. After that, I knitted for dolls, then I started trying on myself (but not a lot, mostly hats and blouses like turtlenecks), later, when my daughter was born, I occasionally knitted for her.
The beret and scarf were tied to a coat purchased for my daughter.

In the departments with hats, it turned out to be extremely difficult to find something that matched the tone or was very close. There was only one way out: sit down and tie him up. On the Internet I found a stunningly simple description of knitting a beret for a girl. This is my first job. For the first time in my life I knitted a beret.

The beret for a girl is knitted on needles No. 3 from Novita yarn (Finland). Scarf on a Silver Red LK150 knitting machine. In total, approximately 3 hours were spent on the work.

Description of knitting a beret for a girl

Size: 52.
Yarn consumption: slightly less than 100 g.

Knitting needles: No. 3.

Cast on 88 stitches on circular needles No. 3 and knit with an elastic band 1 x 1. After 4 cm, knit

Knit row 1, purl the reverse row, then rib 4 cm.
This will be the edging of the beret.

Next, make additions in the first row after the elastic: * Knit 2, yarn over*. Repeat ** across the entire row and knit only = 132 stitches. Next, knit without any additions using face knitting. Make cuts 40 rows after the elastic.
1 reduction: * 10 knit stitches, 2 knit stitches together*. Repeat until the end of the row. Then 1 row without decreasing.
2nd reduction: * 9 knit stitches, 2 knit stitches together*. Repeat until the end of the row. 1 row without decreasing.
3 reduction: * 8 knit stitches, 2 knit stitches together *. Repeat until the end of the row. 1 row without decreasing.
Decrease every other row until there are 12 stitches left on the needle. Pull them together with thread. Do back seam.

Head circumference: 48-50 cm. Mittens size 3. You will need: for a hat 100 g and for mittens 50 g of colored yarn sectional dyeing (75% sheep wool, 25% polyamide, 125 m/50 g); set of 5 double needles No. 3.5.

This beret for a girl is tied in circular rows. For knitting striped children's beret You can take multi-colored leftover threads. Children's beret sizes: 5 (6-7, 8-9) years. Patterns for a children's beret: 1×1 rib, stockinette stitch (knit stitch), garter stitch (plate stitch). Platonism

Knitted striped beret for a girl or boy

A flirty beret will protect your baby from the wind and make him very fashionable. For knitting you will need: 20g yarn of blue color, 20 grams of white yarn, knitting needles No. 3, 1 button. Technique: Knit striped beret in the round. Begin

Berets for girls are designed for head circumference: 52-54 cm.

The models are made with knitting needles. The decor is made using dry and wet felting and nuno - felling.

Knitted beret for a girl with decor description

You will need: 100% fine merino wool (146o yd x 100 g); set of double needles No. 2.5 -3; natural wool of selected color for felting; needles for felting; foam backing.

Knit a regular classic beret for a girl in the round. Start knitting with an elastic band 1 x 1 thread in 3 folds, then go to 2 threads and continue working with stockinette stitch, making an increase in the 1st row for expansion as follows, knit additionally facial loops after every 2nd loop, elastic bands crossed from the broach. Knit straight 4-7 cm, and then start decreasing, dividing the number of loops into 8-10 wedges. Decrease by knitting 2 stitches together in every 6th row, then in every 4th row, until there are 4-6 stitches left on the needles. Knit another 2 cm on these loops, pull off the remaining loops. You can knit beads, thread with payeps, etc. into the beret itself. Now start finishing.

Decoration in the form of flowers can be done by wet or dry felting and felted to the shore with a felting needle, or you can use the idea of nuno felting, i.e. roll pieces of chiffon, silk, and lace into the wool. The center of the flowers can be decorated with pieces of veil, beads, etc. Next, you can make appliqués from dolls: draw the outline of the figure on a piece of felt and lay clothes on it. Place your legs and arms directly on the beret.

To save time you can also use ready felt and use it to make jewelry in the form of appliqué. For example, if the felt is made of 100% wool without any synthetic admixture, then you can hold it over steam, stretch it and give it any desired shape. But keep in mind that such decorations will be heavy and will have to be sewn to the hat. Be sure to sew the lining according to the size of the beret, thanks to which it will better retain its shape and make the inside neat.

You will need: For children's scarf and hats 350 g of red Boston yarn (70% polyacrylic, 30% sheep wool. 55 m/50 g), 150 cm of hat elastic, 25 different decorative buttons; a set of double needles and hook No. 7-8.

Elastic band: the number of loops is a multiple of 3. Circular rows: alternately purl 2, knit 1. cross.
Direct and reverse r.: each r. start and end 2 chrome. 1st r. (wrong side): remove 2 edges. as purl., thread in front of loops, alternately knit 2, purl 1. cross., complete 2 persons. and knit 2 chrome. purl 2nd r. (personal row): remove 2 chromes. how to purl.. thread behind the loops, alternately purl 2.. knit 1. cross.. finish 2 p. and knit 2 chrome. persons Repeat 1st and 2nd rows.
Knitting density: 16 p. and 18 r / circular r. = 10 x 10 cm.

Knitted children's beret for girls, description

Head circumference: 50-52 cm.
Depending on the number of loops, knit on stocking or circular knitting needles.
Description of work: cast on 64 sts with red thread and knit alternately for a 3.5 cm placket. cross, purl 1 Then after each purl. p. knit 1 purl from the transverse thread. cross. = 96 p. and knit with an elastic band alternately 1 persons. cross, purl 2 For a total height of 17 cm (24 circular elastic bands), subtract 64 sts. To do this, remove each face with a cross. p. from the previous p. as knits., knit the next p. knit. and stretch it through both removed loops = 32 sts. Then knit 4 circular r. knits., then knit 16 x 2 stitches together. = 16 p. and in the next 2nd p. knit 8 x 2 stitches together. Pull off the remaining 8 sts working thread. Sew buttons onto the placket, as in the photo. Pull into every 2nd circular r. hat rubber films.

Children's scarf for girls knitted

Description of work: cast on 30 stitches with red thread (width 18 cm) and knit with an elastic band, starting with 2 edges. at both sides. After 120 cm, close all loops. Tie 10 tassels of fringe into the cast-on and closed edges. To do this, fold 4 threads 20 cm long in the middle, pull them through the scarf in a loop, pull the loose ends through the loop and tighten. Fringe tassel length in finished form= 8 cm.

Beret and scarf with beads, knitted for a girl

Hello, my name is Irina, I am sending my work for the first time. I live in the Novosibirsk region, I also work in free time I knit to order for friends and family. I knitted this beret and scarf for my daughter, using “BABY” yarn and regular knitting needles for knitting socks No. 2. Instead of large beads, I preferred beads, which I first put on a thread, placed along the entire length, and then started working!

How to knit a beret for a girl with knitting needles

Takes knitting needles for a girl, models from the Internet

Since not all models of berets for girls that can be knitted are presented on the site, we have selected several beautiful models from the Internet.

The size of the beret is 50-52 cm for the OG. The beret stretches, so this the description is fine and for a larger head volume. The beret is knitted in the round!

The size of the beret is 54 cm for the OG. The beret is knitted in the round. And although this description is presented for woolen threads, you can take cotton and knit a summer beret for a girl.

Knitting a beret for a girl

Takes with knitting needles for a girl 6-9 months old.

The white openwork beret is knitted from 100% cotton yarn (50 g) using circular knitting needles No. 3.5. You will also need a hook number 3.5 and 50 cm of hat elastic.

Description of the knitted beret for girls:

Cast on 100 loops on the knitting needles and knit in a circle with an elastic band of 1*1 - 2 cm. Then evenly add 80 stitches, knit 1 row with an elastic band, then knit according to the pattern from rows 1-23. After this, knit 5 rows facial loops and bind off the loops by knitting 2 stitches each. persons together. Tie the edge of the beret with a crochet hook so that the beret does not stretch, “grabbing” the hat elastic.

Knitting beret pattern

AVA knitting for girls, from designer Sarah Grieve

Beret sizes: 4/6 years – 8/10 12 years.
Materials:

Cocoon threads (50 g / 70 m) (70% acrylic, 25% mohair, 5% alpaca) 2-2-2 balls of SAFARI color
Id?al thread (50 g / 125 m) (40% worsted wool, 30% acrylic, 30% polyamide) 1-1-1 ball of Truffe color
Knitting needles No. 5.5 and 6.5.

Types of knitting:

Elastic band 1 x 1, knitting needles No. 5.5: *knit 1. p., 1 p. p. *, repeat from * to *.
Persons satin stitch, knitting needles No. 6.5: *knit 1. R., 1 R. purl *, repeat from * to *.
Fantasy pattern, knitting needles No. 6.5. Divisible number p. 4 + 3:
1st r. (knit side of work) and 3rd row: knit knit.
2nd row: 2 p. p., *3 p. together purl, without releasing the p. from the left knitting needle, make 1 yarn over, knit 1 more time 3 p. together purl. and release the st from the knitting needle, purl 1. p. *, repeat from * to *, finish 2 p. p. instead of 1 p.
4th row: 4 p. p., *3 p. together purl., knit as in the 2nd row, 1 p. n. *, repeat from * to *, finish 4 p. p. instead of 1 p.

Square 10 cm with a fancy pattern, knitting needles No. 6.5 = 17.5 sts and 18 r.

Cast on 67-73-79 sts in color SAFARI on needles size 5.5. Knit 4 cm high (8 rows) with 1 x 1 rib, distributing 39-40-41 increments in the last row. On
received 107-113-121 sts, knit with a fancy pattern using knitting needles No. 6.5:
4/6 years: finish 2nd year. 1 purl. p. and 4th r. 3 p. P.
8/10 years and 12 years: start and finish 2nd r. 1 purl. p. instead of 2 and 4th p. 3 p. p. instead of 4.

At a height of 13-14-15 cm (24-26-28 r.) from the beginning, knit 2-1-2. p., *2 p. together knit., 5 knit. p. *, repeat from * to *. Knit 1 p. fantasy pattern, on the remaining 92-97-104 sts.
In the next row, knit 2-1-2. p., * 2 p. together knit., 4 p. knit. *, repeat from * to *. Knit 1 p. fantasy pattern on the remaining 77-81-
87 sts. Repeat these decreases one above the other, knitting 1 st less each time between them 4 more times in each 2 r. Knit 1 p. with a fancy pattern on the remaining 17-17-19 sts.

In the next row, knit:
4/6 years and 8/10 years: 1 person. p., then all p. together, 2 persons each.
12 years: 1 time, 3 stitches together, then all stitches together, 2 stitches.
Knit 4 p. persons satin stitch on the remaining 9 sts, then thread the thread through the sts, pull off and stop.
In the last r. elastic bands 1 x 1, embroider a line with Id?al threads in Truffe color (double thread) with a back stitch, needle 1 p. and under 1 p. Make beret seams.
Thread elastic thread on the inside side of the elastic 1 x 1.

Takes knitting needles for a schoolgirl

The volume of the head is 53 cm. (132 stitches). I cast on needles No. 2.5 and knitted approximately 5 cm with a 2x2 elastic band.
I developed a diagram for the beret.
knit purl rows. P.