Make a small beautiful Christmas tree with your own hands. How to make a Christmas tree with your own hands from plastic bottles and how to decorate it. Photo-instruction for self-gluing a Christmas tree from improvised materials

Today in stores you can see a large number of various trees. However Christmas tree it is not at all necessary to buy, it can be made with your own hands from almost any improvised means. Of course, you simply cannot do without a live Christmas tree at home during the New Year holidays, and a hand-made Christmas tree will perfectly decorate the house or be suitable as a gift to friends and relatives.

Craft: DIY Christmas tree

Christmas tree from magazine pages

To make a pretty Christmas tree out of magazine pages you will need:

old magazine;
PVA glue;
cardboard;
pen or pencil.

First of all, you need to make a cone out of cardboard and fasten it with glue. Neat circles or flowers of the same diameter should be cut out from the pages of an old magazine.

The resulting circles need to wrap the pencil. Thus, they will turn out a little twisted. Then you can start gluing the circles to the cone, starting from the bottom. The mugs should be glued by pressing them tightly against each other so that the cone itself is not visible. From one circle, you can make a small cone and glue it instead of the top. The tree is ready.

Christmas tree from old magazines.

Video: do-it-yourself Christmas tree craft

Christmas tree from wrapping paper

It is very easy to make a Christmas tree from wrapping paper.

For this you will need:

wrapping;
cardboard;
scotch;
scissors;
decorations.

As with most Christmas trees, the first step is to make a cone out of cardboard or thick paper. If the wrapping paper you are going to use is thick enough, you can make a cone out of it.

The resulting cone can be fixed with adhesive tape. Then you need to cover the cone with wrapping paper. To do this, lay the paper on a flat surface with the beautiful side down. Then tape the end of the paper to the cone, and slowly turn the cone to completely wrap it with wrapping paper.

Cut off excess paper with scissors. It remains only to decorate the Christmas tree out of paper. To do this, you can cut out the stars and decorate them with sparkles, you can stick buttons, beads, tinsel, stickers or lace on the Christmas tree.

DIY Christmas tree from wrapping paper

Crafts with children: a luminous Christmas tree for the new year

A luminous Christmas tree looks very original and beautiful. In order to make such a Christmas tree with your own hands you will need:

floristic mesh;
floral wire;
cardboard;
scissors;
cellophane;
PVA glue;
pins;
decorations.

First, make a cone out of cardboard. Wrap the finished cone with cellophane. Then cut the floral mesh into small pieces and coat with glue. Glue the resulting pieces of mesh onto cellophane. Secure the resulting design with pins and wait until the glue is completely dry. After the cone dries, repeat everything done again. After complete drying glue, remove the cellophane from the cone. Secure the garland inside the cellophane with pins. You can decorate the Christmas tree as you wish.

The process of making a luminous Christmas tree

Do-it-yourself glowing Christmas trees

Original Christmas tree made of pasta

In order to make an original Christmas tree from pasta you will need:

foam cone;
gouache, acrylic paints or spray paint;
pasta various sizes and forms;
PVA glue;
tassel.

First, paint the Styrofoam cone any color you like and let it dry. Then carefully glue the pasta to the cone. Design can be absolutely anything. Then paint over the pasta, carefully coloring all the details. It is better to cover the pasta with paint in two layers. Let your tree dry thoroughly.

The process of making a Christmas tree from pasta

Fluffy Christmas tree made of colored paper

A Christmas tree made of ribbons of colored paper turns out to be very elegant. To make one yourself New Year's beauty you will need:

cone of thick cardboard;
colored paper;
PVA glue;
double sided tape.

First you need to make the base for the Christmas tree, for this we take a thick sheet of cardboard, fold it into a cone shape, fixing it with glue. Then we make thin strips of colored paper, the same in length and width. Christmas trees made of green, red, silver and gold paper look very impressive. Using glue, glue the strips along the edges, getting loops out of them. We attach the resulting loops to one side of the adhesive tape, and fasten the other side to the cone in the direction from the bottom up. Thus, a funny fluffy Christmas tree is obtained.

The process of making a Christmas tree from strips of colored paper

Fluffy Christmas tree do it yourself

Craft Christmas tree: 40 photos and workshops

Elegant homemade Christmas trees from tinsel and balls

Children's craft: green Christmas tree made of cardboard or paper

New Year's crafts with children: a Christmas tree made of cones and balls made of fabric or yarn

Multi-colored Christmas trees made of yarn with your own hands

Children's craft: Christmas tree made of felt and buttons

Flat Christmas trees from dishes - an unusual idea

How to sew an elegant Christmas tree - an idea for the New Year

How to weave a Christmas tree from beads with your own hands

Flat Christmas tree made of twigs for wall decoration

Beautiful Christmas tree made of lace with your own hands

Master Class: voluminous tree paper quilling

Stylish tree made of jute and beads

Craft tree from plastic forks and other utensils

Miniature Christmas trees made of beads

Beautiful Christmas trees from ribbons

How to make a Christmas tree from yarn and buttons with your own hands - master class

Little lace Christmas trees

Crafts - Christmas trees from burlap and spices

Christmas tree made of coffee, beads and satin ribbons

Two Christmas trees from pine cones

Knitted Christmas tree - photo

How to sew a Christmas tree from scraps of fabric

Unusual Christmas tree made of plastic spoons

Gift Idea: Candy and Tinsel Christmas Tree

Christmas tree made of beads - a beautiful craft

Decor of a bottle of champagne in the form of a festive tree

Christmas tree made of satin ribbons for the new year

Flat Christmas trees made of twine and lace

Bright Christmas trees made of colorful balls

Homemade tree from wrapping paper

Fluffy Christmas trees made of yarn with your own hands

Small Christmas trees made of fabric and buttons

Christmas tree crafts from natural material: cones and feathers

Simple Christmas trees made of yarn, beads and buttons

Transparent Christmas trees from Christmas balls suspended in the air

Christmas tree from wine corks do it yourself

Hello dear readers! Here I was decorating an apartment before the New Year and realized: a Christmas tree with my own hands could help in decorating the room. And not one. And not alone :)

Of course, I had several ideas that I want to implement in the near future. But when I tried to find on the Internet master classes on creating these wonderful creations. Oh, with the help of which they are just not made :) I would not have thought of using some materials at all. So together with you today I will admire the masterpieces of human fantasy in the field of Christmas tree handmade!

To make it easier to search, I offer a small content:

DIY Christmas (and not only) Christmas trees: master classes

Almost all the Christmas trees presented today are made using different materials. Some are very unusual, artsy, rich. I would even say elite. And others, on the contrary, are as simple and minimalistic in design as possible. A la Ikea, so to speak.

DIY paper tree

The largest group today. You will see many representatives of a beautiful spruce species. Each one is different, so take your pick :)

Origami

The simplest version of a paper Christmas tree is using a square. Fold the square in half (diagonally), bend the opposite sides to the center (like in an airplane) and that's it :)

Tip: Use this simple technique to decorate a greeting card or fold napkins beautifully.

Angular

First things first, fold the square of paper as shown in the photo. Then:

Fold the structure so that the side corners are inside. This will result in a square, four times smaller than the original.
Fold the right corner towards the center
And the left one.
Fold the right corner to the right.
Fold this corner under.
Do the same with the second one.

Now turn the design over and repeat steps 2-6 only for this side. It remains only to cut off the sharp lower tip and make a few cuts on both sides. Then bend each incised tip and put the Christmas tree on the table)

Circles

To create this spruce, take paper and draw a circle on it, drawing it in the necessary way, as under number 1. Next, cut out the circle and cut each section to a small circle. Now wrap each of these small sections on both sides with the tips inward, glue. Do the whole circle in this way.

Spruce will need several rows. In the photo, for example, you see a beauty of 15 layers with a cone top. Layers, by the way, are assembled on a wire, piercing the centers of the parts.

Panel in kindergarten

IN kindergarten given the task to make a spruce together with the child? Then this option is the easiest. Take thick cardboard and colored paper. Cut out triangles from cardboard, cut the paper into strips and glue them with an overlap. Even a child can handle it :) Cut off the excess. At the bottom, you can glue a skewer and stick it into the synthetic winterizer.

Tip: the resulting product can be used as bookmarks for books.

We make using improvised materials

To create this kind of fluffy coniferous creature, you will need a long metal pin on a stand and lots and lots of waste paper. Feel free to use newspapers, old magazines, etc.

Tip: additional decoration of the Christmas tree can be done with spray paint, which can be sprayed on the leaves. This will make them stronger and more durable.

big tree knowledge

The next beauty will be a spruce that carries knowledge. For her, you just need to put all the available books in a pyramid. I highly do not recommend hanging an electric garland, as in the photo: fires in New Year occur very often, do not neglect it. It is better to put ordinary tinsel and balls on the ledges.

From tubules

Incredible simple technology. Suitable for decorating postcards and walls. Prepare several tubes folded from paper rectangles. Glue each in the intended location. The tubes can be made gradually decreasing or with a “brush” (sometimes overlay longer elements higher than necessary).

Glue embellishments from buttons or sequins on top.

fluffy

You will need a lot for it. paper strips, which will need to be glued in layers to a paper cone. And put on a cute cone hat on top. An excellent craft that you can do with children :)

For those who love quilling

Love to spin paper spirals? Then prepare several strips of paper of the same thickness. Roll 17 pieces into spirals and pinch one end of each. For the trunk, simply roll 4 tubes, put on a skewer. Glue all parts, according to the photo. The tips of the "branches" can be decorated with cylinders of a different color, similar to Christmas decorations.

Vytynanki

I remember that my sister once mentioned that she liked the so-called vytynanki - one of the types of Slavic folk art in which paper is cut out amazing beauty things. Often they are glued to glass for reinforcement. festive atmosphere.

And they are made like this: the desired pattern is drawn in advance on paper. IN this case- ate, folded in half. And then, with the help of a well-sharpened clerical knife, all unnecessary parts are cut out. For spruce, you will need two parts folded in half, which can later be sewn in the center on sewing machine or manually.

From corrugated paper

Continuing paper theme, I want to show you three simple Christmas trees. First, with blue roses, which are made from tissue paper (like corrugated, but much thinner). Each rose is created with a strip that is twisted heavily at the center and slightly looser towards the end. Thanks to the properties of paper, roses are easily straightened and become lush.

The base is again a cone.

The next spruce is very similar to the previous one, but here the strips used to create flowers are cut along the edge, due to which they are very fluffy. They are again twisted into a flower, but they do not seek to give the appearance of a rose, but simply grind them as far as possible.

From cupcake molds

Well, that's an interesting idea. I have just a bunch of these molds, which, it seems, will never be useful to me (I'd rather buy silicone ones). From each cut off the bottom and cut from one edge. And stick on a paper cone.

By the way, you can make a flat Christmas tree on a postcard from scraps, as in the photo in the master class.

Fabric Christmas trees

Floral

For this beauty, you will need a lot of flowers from circles. For them, cut out several circles from the fabric and burn the edges. It is better to take an organza, a veil or something similar. Then collect each flower on a thread and decorate the core.

Spruce again from a paper cone at the base :)

From felt

To create these pendants, take soft (for the base) and dense (for other elements) felt and beads. Patterns can be made directly from the photo. All that remains is to cut out the details from the felt, which then need to be sewn with a running seam and stuffed. And decorate, of course :)

You can give such a Christmas tree to a guy - it will be very touching :)

From satin ribbon

Prepare beads, satin or rep ribbon (or maybe even lace?), threads and a needle. All that is needed is to string beads and loops of ribbon alternately onto the thread. The main thing is not to forget to fix at the beginning and at the end of the product.

From balls

The essence of creating this wonderful Christmas tree is to create a huge number of fabric balls. For each of them, cut out the circles and tighten with a thread, laying a running seam. Put a little padding inside and pull it off. Each such ball must be glued to the base.

The base can be a foam cone, a paper cone, or sewn from fabric. You can also arrange a spruce in the form of a topiary, for this you will also need a pot with polymer clay and sprinkles to create the effect of an earth embankment.

Other materials or the need for inventions is cunning

Sorry, dear readers, I do not want to offend anyone in any way. Just this expression the best way describes the impossibly diverse amount of materials with which people manage to create Christmas trees :))

From beads

Pretty simple, but interesting Christmas tree. Prepare for its creation chopped beads, a couple of beads and a thin wire for working with beads. First, string the top, as in photo 1. Then make four upper paws- this will be the top.

Now prepare the branches, in each of which make several loops - smaller for the upper branches, more for the lower ones. Gather all of them into one trunk, wrapping it across with a thin wire.

From plastic bottles

I respect this master class for careful attitude to nature and recycling. Take a plastic bottle, cut off a smooth central part from it, which you cut into a fringe. The lid will go to the top, the bottom can be used as a delivery. Glue all the cut elements to the central rod.

From spools of thread

My friends, if you have a certain number of wooden spools of thread, then you should know that you are the owner of a treasure with which you can make an amazing fir tree. To do this, clean all the coils from the threads and glue the lowest row on the round dense base. Then glue row after row on the existing ones below. Simple and stylish :)

From sweets

The base will again be a paper cone. Attach a row of ordinary tinsel to it, then a row of sweets, then tinsel again, etc. On the top you can glue the most delicious candy(as a star). One minus - there will quickly be nothing left of the Christmas tree :)

From the bark

Strict Nordic Christmas trees. Which can be done if you have a paper cone and a little (okay, a little more than a little) bark on hand. Pieces need to be glued in rows so that the tree looks like a spruce.

I only ask you - do not spoil living trees for this. It is better to look for already dumped by a thunderstorm. By the way, the method with small pieces is also applicable with CDs;)

From sticks

We continue the theme of nature. This time we are decorating holiday boxes. Use sticks to lay out a semblance of a tree, which, in turn, decorate with threads, buttons and other decorative details.

From clothespins

This one definitely needs to be concocted for the New Year))) I have a dozen or two clothespins with hearts, it will be cool) In general, all you need is to build a rod with a stand. For example, a cap with a knitting needle. And already put on “branches” on the knitting needle. You can insert lollipops into the edges.

bohemian

And we will make this spruce with the help of feathers. The principle is the simplest - glue the feathers in rows from below. By the way, feathers can be purchased in woven. But what they painted in green - I don’t know: (Maybe someone will tell?

From wire

Build the frame like this: wrap three circles of wire around something round (cans, buckets, etc.), so that each next circle is smaller (or larger) than the previous one. Then take three pieces and use thin wire to tie them together at the top and in one place on each circle.

All this can be wrapped beautiful garland. If you get smart, you can even hang a few Christmas decorations.

Mesh (and sisal)

Such a Christmas tree can be built in a few minutes. To do this, take a mesh or a sheet of sisal (read what it is). Put on a paper cone and wrap in several layers. Fasten with a cord from above, wrapping it with a spiral around the spruce. Decorate Christmas decorations.

And now is the time for the most minimalistic Christmas trees, which will decorate the house and will not take up much space.

From... Christmas balls

Here is such a pun - Christmas tree from Christmas balls. Nevertheless, it looks great :) For some reason, I immediately imagined such a structure at some cool corporate party of a large company - it looks very status.

It’s not at all difficult to make this one: take a few dozen green (or whatever you want) balls and tie a thin thread or fishing line to each. The hardest part is getting the right length. Do this: Determine for yourself right amount balls for each row and, starting from this, estimate the length of the thread. The higher the ball, the shorter the thread.

Symbol

That's what you can call the next two conifers. The first is located on the wall and is made up of pieces of tinsel imitating fir branches. You can attach it with double-sided tape so that the ends do not stick out.

The second is simply skilfully assembled with the help of many paintings, badges, souvenirs, etc., which were collected in the likeness of a spruce. Pay attention to how some elements seem to imitate toys that are located on a tree. Interesting idea, by the way, for an original gift for February 14 - winter will still be in force, so the tree will be quite appropriate.

Well, dear readers, it's time for me to say goodbye to you. The spruce hit parade is over, share your impressions: what inspired you, what would you take note of, etc. Be sure to tell your friends on social. networks using the buttons below. Bye!

Sincerely, Anastasia Skoreva

Putting up a Christmas tree for the New Year is a good tradition supported by many families. But to cut live spruce to enjoy the beauty of the forest beauty just a few days, not too humane. Fortunately, in Lately people began to think more and more about this issue and make their choice in favor of artificial beauties that can brighten up the New Year holidays for more than one year.

To get the main attribute of the New Year into your home, it is not necessary to buy a Christmas tree. It will be much more interesting to do it yourself, especially if not free space for a big fluffy beauty or in the house there is active kid. Moreover, similar handmade Christmas trees – great gift to the New Year.

If you choose colorful magazine pages, you get bright Christmas tree, which can be put in the nursery.

For the manufacture of original Christmas tree from pieces of the magazine you will need:

old magazine (a book with bright pictures, glossy posters, etc.);
a thick sheet of paper or cardboard;
PVA glue (it is better to take a glue gun);
pencil;
scissors (much more convenient to take a shaped hole punch).

Step 1. From a thick sheet of paper, make a cone, fixing the edges with glue.

Step 2 Take magazine pages from bright pictures and cut out many identical circles. If there is a shaped hole punch, it will be much more beautiful if you use it.

Step 3 To make the cut out circles twirl a little, wrap them around a pencil for a while.

Step 4 It's time to start assembling your Christmas tree. Starting at the base of the cone, glue it in a circle with bright swirling circles. Try to make neat rows, glue the circles tightly so that there are no holes.

Step 5 From one of the circles make a small cone and put it on the peak.

Do-it-yourself fragrant Christmas tree from dried citrus fruits and cones

Such a Christmas tree will favorably decorate any interior, and a delicate aroma will create festive mood.

To make a fragrant Christmas tree you will need:

a sheet of thick paper or cardboard;
dried slices of lemon or orange;
cones;
puncture;
glue gun.

Step 1. Make a cone out of cardboard or thick paper. You can make several cones of different sizes at once.

Step 2 Prepare and dry citrus slices. Prepare the cones.

Step 3 Stick dried lemon or orange circles and cones on the cone. You can make a separate citrus Christmas tree, a separate Christmas tree from cones, but it’s better to combine the ingredients and you get a lemon-cone Christmas tree.

Step 4 Twist a star from the wire and attach it to the "crown" of the Christmas tree.

A wonderful fragrant Christmas tree is ready!

Christmas trees from wrapping paper

You can decorate the house with such Christmas trees, supply them to a group in kindergarten, and also present them to the teacher on the eve of the New Year holidays.

To make a Christmas tree from bright wrapping paper, you will need:

a large sheet of cardboard or thick paper;
wrapping;
double-sided tape and regular tape;
scissors;
small jewelry (beads, beads, sequins, sequins, ribbons, etc.).

Step 1. Make a cone out of cardboard. If the wrapping paper is thick enough, then the cone can be made immediately from it.

1.1. Fold the paper diagonally to make a cone.

1.2. Secure the resulting cone with tape.

1.3. Carefully cut off the excess paper at the base of your cone.

Step 2 Take a bright wrapping paper and cover the cone.

2.1. Lay the wrapping paper face down on the table. Tape the end colorful paper to the top of the cone.

2.2. While slowly turning the cone, wrap it tightly in wrapping paper.

2.3. Attach double-sided tape to the edges of the paper and connect the end to the cone. Cut off the excess at the base so that the "bottom" is even.

Step 3 Decorate the Christmas tree however you like.

Creative Christmas tree is ready!

Do-it-yourself Christmas tree made of felt

A soft and delicate Christmas tree made of fabric can be presented as a New Year's gift to a colleague, girlfriend or relative.

To make a Christmas tree from felt, you will need:

felt (it is better to take felt of two or more colors in the same range so that the Christmas tree looks prettier);
cardboard;
double-sided tape or glue;
scissors.

Step 1. Make a narrow cone out of cardboard, securing it with glue or tape.

Step 2 Now take the felt and scissors cut out circles of different diameters in ascending order. It is better to use pre-prepared cardboard circles as templates.

Step 3 Attach Christmas tinsel to the base of the cone with glue or tape.

Step 4 Make a criss-cross cut in the center of each circle of felt.

Step 5 Sequentially put the circles on the cone to the very top.

Step 6 To decorate the "top" of the Christmas tree, add tinsel, attach a star or a pre-prepared felt cone with decoration at the very peak.

A cute cozy Christmas tree is ready!

Glowing creative Christmas tree with your own hands.

Such a Christmas tree will be a wonderful night light for your baby during the New Year holidays. It can also be placed on the windowsill, which will give a special originality to the interior of your home.

For the manufacture of glowing Christmas tree You will need:

floristic (flower) mesh (it is better to take a mesh of several shades of green);
floral wire;
cardboard or thick paper;
scissors;
cellophane
PVA glue;
pins;
Christmas tree garland with small bulbs;
additional decorations (optional).

Step 1. Roll up a cardboard cone.

Step 2 From above, the cone must be wrapped with cellophane.

Step 3 In a deep container, make a solution of a small amount of water and PVA glue.

Step 4 Dip small pieces into the solution floral grid and stick them on the cone. Joints can be coated with glue additionally.

Step 5 Reinforce the structure with pins and wait until the first layer is completely dry.

Step 6 In the same way, make the second layer of the future creative Christmas tree.

Step 7 After drying, you need to remove the Christmas tree from the cone and remove the cellophane.

Step 8 Place a garland inside the Christmas tree, securing it with floral wire.

A wonderful luminous Christmas tree is ready! It remains only to decorate the Christmas tree to your taste.

Christmas tree made of pasta

You can make such an interesting Christmas tree with your child. Fascinating activity will also be useful for fine motor skills fingers.

To make a Christmas tree from pasta, you will need:

foam or plastic cone (you can make a cone from thick paper or cardboard);
pasta (various shapes and sizes);
dye;
PVA glue;
tassel.

Step 1. Prepare the cone and paint it any color you like.

Step 2 After the cone dries, you can start gluing pasta in any desired design.

Step 3 After all the pasta has been applied, they can be carefully painted, preferably in two layers.

Christmas tree of pasta is ready! Every grandmother will be happy with this soulful gift from a beloved grandson or granddaughter.

DIY colorful paper Christmas tree

A paper tree will decorate any workplace and will create a festive mood for everyone who is lucky enough to see her.

To make a Christmas tree out of paper, you will need:

long skewer;
colored colorful cardboard or design paper;
thick cardboard;
glue gun or glue moment.

Step 1. From thick cardboard, cut out a square base for the future Christmas tree.

Step 2 Use glue to secure the skewer to the base.

Step 3 From designer paper or colored cardboard, you need to cut out circles (preferably with curly edges) of different diameters, 3 circles for each diameter.

Step 4 Make small holes in the center of each circle.

Step 5 Lubricating the holes in the circles with glue, gradually assemble the Christmas tree.

Step 6 Decorate the top of the finished Christmas tree paper star or any other beautiful detail.

New Year's cozy Christmas tree made of thread

cute fluffy Christmas trees from yarn will give a lot of warm pleasant impressions.

To make a Christmas tree from a thread, you will need:

cardboard for a cone or already finished cone from foam;
pile yarn;
thick yarn;
miniature pins;
decorations.

Step 1. Prepare a pre-purchased styrofoam cone or make a cardboard cone.

Step 2 Take two threads at once and fasten the ends with pins at the very base of the cone.

Step 3 Wind the threads around the base of the cone, securing with pins about every 5 cm.

Step 4 Wind the threads towards the top of the cone, after a full circle at the base, you can no longer fasten the threads with pins.

Step 5 When you get to the top, fasten the threads and wrap the cone already in the downward direction, covering the Christmas tree with a second layer of threads.

Step 6 Cut off the ends of the threads at the base and secure them with pins.

The Christmas tree is ready! You can leave it in this form, but it is better, nevertheless, to decorate the Christmas tree with various beads, beads and other decorative elements.

Creative Christmas tree made of corrugated paper

If you want something unusual, you can make a huge Christmas tree on the wall.

To make a Christmas tree from corrugated paper, you will need:

matte cardboard or foam base;
corrugated paper;
scissors;
masking tape;
stationery knife;
PVA glue;
marker.

Step 1. Spread the cardboard on the floor and, using duct tape, connect all the sheets to get large rectangle. The photo used black tape, but it is better to take white (painting tape fit better Total).

Step 2 Draw the size of your future Christmas tree and using a clerical knife, cut out a large triangle.

Step 3 Fold the crepe paper in half and cut the fringe with scissors.

Step 4 Glue the fringe carefully, starting at the base of the tree and all the way to the top, leaving no gaps.

Step 5 Make a barrel out of a rectangle of brown paper or cardboard. You can decorate the trunk with a fringe of corrugated paper Brown.

The tree is ready! You can hang it on the wall and decorate as you wish. It turned out to be a wonderful photo zone for New Year's photos.

Click Class

Tell VK

Let's decorate our home winter holiday. We have already made various ones, hung them on windows and walls. Now we want to give the holiday symbolism. And this, of course, is the main princess of the celebration - the Christmas tree. I know that many feel sorry for the trees and replace them with artificial counterparts. But sometimes you just want to make something with your own hands in order to get satisfaction from the action and accent in the decor.

All craft ideas are easy to do with the kids. To make it easier to do the job, make the basics in advance. And try not to skimp on decor. Buy more different beads, ribbons, ribbons, beautiful buttons. Gather small toys from kinders and decorate with them. And they will go into business and will not wallow.

You can create beauty from everything that is at hand. The main thing is to attach to this a share of imagination and all your accuracy. With modern devices, such as a glue gun, you can give the product original forms and fix different textures and materials.

I know that traffic jams from wine bottles and ice cream sticks. Well, we didn’t have any traffic jams at home, and the sticks had long since sold out. different needs, so let's move on to materials that any housewife will definitely have - pasta and yarn.

Let's start with pasta. I know that various snowflakes are made from them. It turns out that they are also suitable for the Christmas tree.

We will need:

A pack of pasta (better to take feathers)
glue gun
Cardboard sheet
Dye
Decor

It is better to prefer the shape of "feathers" or "spirals". choose good manufacturer so that all the little things are even and the same length.

First of all, we glue a cone out of cardboard. I'm doing it simple twisting leaf around the arm. To prevent the workpiece from falling apart, we fasten it with a stapler.

And now we cut the base so that the tree stands straight, and not crooked.

We always start from the bottom. “Lay” the first two rows, i.e. glue them so that they lie on the surface, so the product will be more stable.

And the next rows need to be raised exactly on the previous one by an amount equal to half the “spiral”.

When you finish the top, we begin to cover the entire craft with paint.

You can take green, or you can buy gold or silver paint in a spray can. Only then you need to spray it not at home.

I really like the result. It doesn't take much time, but it looks very elegant.

Now it's the turn of yarn and cord.

To make a Christmas tree out of yarn, you need to wind the thread exactly one above the other on a paper cone. Periodically fastening it with hot glue to the base.

Decorate with decor.

This product is made even faster than pasta.

You can decorate them with buttons.

We will need:

Wire
Decor

First, we select the wire. It should be firm and not thin. From it we turn a cone-shaped spiral. We check for stability. The bottom can be wrapped twice.

We begin to string the cord on the wire.

Dry and decorate.

Glue will give the structure additional strength and will not allow the cord to slide down the frame.

Volumetric Christmas tree made of paper

Paper is always the first thing that the word "craft" is associated with. And from it you can create not one Christmas tree, but a whole spruce forest in which not a single tree will be repeated!

Let's say we want a paper tree to delight us on the kitchen table. Then you need to make it fluffy and voluminous. And also the most stable.

So, I picked up a few detailed master classes with clear description process.

Option 1

We will need:

cardboard cone
green paper different shades.

We cut out many circles of the same size from paper.

And we begin to glue their edges to the cone, observing the rows.

The first layer always goes at the base.

This craft is available in terms of difficulty, even two year old. And it looks quite rich because of the different shades of the same color.

Option 2. Terry cone herringbone

Cut out 4 half circles. Each of them is smaller than the previous one in diameter by 2 centimeters.

We glue the blanks into a cone and cut the edges around the perimeter a little to get the volume. Fold the terry edges a little.

Now glue a smaller cone on the largest workpiece. And so in the direction of decreasing.

That's the whole easy process.

Option 3. Let's make a Christmas tree from paper circles

Cut out 4 circles. Each of them is 1 centimeter smaller than the previous one.

Then we fold each circle 3-4 times in half.

We also make the base out of paper. You can wrap green paper around a pencil or a kebab stick.

We string round blanks on the barrel in descending order of size.

To give stability, you can plant the trunk in plasticine, wax or a wine cork.

Option 4

We mark 15 circles, each time reducing the diameter by 1 centimeter. Then we divide each circle into 12 equal parts, drawing lines through the center.

From the center mark half the radius and draw a circle. Now we cut the lines clearly to the drawn circle.

Glue the tips on each petal.

When you have completed all the levels, start collecting the Christmas tree from the widest row to the smallest.

How do you like the ideas, I think that you will find ideas for yourself.

Craft from cotton pads for the new year in kindergarten

The child was taken aback by the task that tomorrow you need to bring crafts to kindergarten? And outside the window, of course, it is already night. Then you can use the packaging of cotton pads. In most families, they are actively used.

We will need:

Packing of cotton pads
Cardboard for the cone base
PVA glue
Decor

We fold the cardboard frame, connect the edges with a stapler.

Take a cotton pad and fold it in half.

Then, on a harmless PVA glue, we plant two tips of a cotton semicircle.

And we glue the workpiece to the base, after smearing its fold with the same PVA glue.

So we do row by row. Better cotton pads glue closer friend to a friend, so that there is a minimum of gaps.

It remains only to decorate the delicate beauty!

Children in kindergarten will definitely like your product, and they will not be ashamed in front of other parents.

DIY craft from napkins

Another very affordable material is napkins. You can use the most inexpensive and monophonic.

We take white, red, blue and green festive shades.

We fold the napkin several times to get the shape of a square, then cut the fold points and cross-fasten the middle with a stapler.

Now we bend each layer, forming a pompom.

Lay out the first row on the frame with these balls. Then we glue balls and other Christmas tree decorations on double-sided tape.

And fill the entire surface of the frame with napkins.

Everything is pretty fast.

By the way, you can see how to make from napkins here. It also turns out very nice.

Candy Christmas tree

A craft made from sweets will be a wonderful gift: buy at grocery store box good candies in beautiful packaging.

It is made of two parts - a base for sweets and a barrel.

We glue the base with a side of 23 centimeters. Make indents when cutting bottom edge and one rib has 1 cm. We will apply glue on them.

Decorate beautiful paper or film. Glue the bottom to its base.

We make the trunk, decorate it and glue it with the frame.

Now we evenly put sweets, braid or Christmas tree beads on the hot glue.

Use the same color scheme for the base and candies.

We make a Christmas tree for the New Year from pine cones

Natural material always gives the right zest decor. It immediately smells of freshness and resin at home. Will give a symbolic meaning to this winter holiday.

Cones are also suitable for various crafts.

You can create a Christmas tree from only cones, or you can dilute them with sisal balls, decorative flowers or fir branches.
The combination of cones and dried citruses also looks unusual.

Glue the cones onto the base with hot glue. You can not think about the side that you have them. This will give a slight bewitching negligence to the product.

Alternating bumps with Christmas balls or other decor.

We cover artificial snow or white enamel spray.

Everything is quite easy, and the result is incredibly beautiful.

Light tinsel Christmas tree

We can't imagine the New Year without tinsel! There are no decorations on it now: stars with balls, and multi-colored tips. It decorates windows, curtains, walls and, of course, is used as a material for crafts: wreaths and Christmas trees.

Since most tinsel manufacturers thread it on thin wire, it can be easily different kind curves and shapes.

A spruce tree is made from it in three minutes!

We will need:

Tinsel
Cardboard sheet
Double sided tape.

From cardboard we make a base in the form of a cone and glue it with double-sided tape.

We remove the protective film from the first row and begin to glue the end of the tinsel, tightly wrapping the frame.

If you didn’t have enough tinsel, then glue the end with tape, and put the next one on top of it fluffy ribbon the same color.

Fluffy pom-pom beauty

Pompoms have also long been loved by our craftswomen. Previously, we made a dog out of them, now we will create a fluffy beauty.

The balls themselves can be made in two different ways: winding 20 layers on a fork or use two round blanks.

We will go with the second method.

We take cardboard or plastic, cut out two identical rings.

Now stepping back from the edge of the thread 5 centimeters, we begin to wind the yarn very tightly.

Then cut the outer fold between the blanks.

With the thread end left, we tie the middle of the pompom so as not to lose all the threads.

Now we are looking for a thick wire and turn it into a spiral. Leave the base wide. We string pom-poms on it.

If the wire is not found, then we use the experience of previous products and form a triangular or conical base.

Felt Christmas Tree Ideas

Felt is also popular with our craftswomen. No matter what they do, educational toys and Christmas tree decorations. Today I will give a few ideas for creating a spruce tree.

From the most simple options to complex.

Option 1. Cut out 10 Christmas trees of the same size from felt. Fold in half and glue the fold to the trunk.
We use branches, saw cuts of trees (preferably spruce or pine).

Option 2. Cut out many identical triangles from felt.

Glue them to the frame in rows. The upper triangle lies between the two lower ones!

Option 3. We prepare 5 squares of different sizes: 9 cm, 7 cm, 5 cm, 3 cm, 1 cm.

We make five of each size.

Now we string the largest squares onto the thick one, distributing them diagonally to each other so that there are no voids.

We pass all the squares like this.

New Year's beauty from fabric

And two more ideas of fabric beauties in the piggy bank. Ends can be finished decorative seam thick contrast thread. Sew buttons or beads onto symbolic branches.

Use several colors of fabrics and textures. For example, take velvet on one side and linen on the other.

You can also choose different patterns in one color scheme or vice versa to play with flowers - companions.

You can fill the Christmas tree with holofiber, synthetic winterizer or cuts, the remnants of your creativity.

If the product is small, fill it with cotton wool.

My dear, I tried to find for you the most interesting and affordable materials for creativity. I'd love to hear your opinion in the comments!

Tell VK

What kind of New Year can be imagined without the main symbol - the Christmas tree. Green beauties on the eve of the holiday are sold at every corner. However, for such a holiday it is not necessary to buy a live spruce. Try to make it yourself. Therefore, in this article we will talk about what you can make a Christmas tree from. new year holiday. It's worth saying what to create main character new year can be from completely different materials. And today we will talk about it in more detail.

Mini Christmas trees from cones.

If your children are just as fond of making crafts as you are, then they can also participate in the creation of such crafts. The next craft - a Christmas tree - consists of cones and plasticine. All your child needs is to learn how to roll small balls out of plasticine. At the same time, for this purpose, you can use the plasticine of the most bright colors. As a base for a Christmas tree, you can use ordinary thread spools. But you have to wrap them in foil. The cones are attached to the coil with super glue.

If you like the next Christmas tree, then take acrylic paints and paint the bump with it. Remember that here it is most reasonable to use green paint. In this case, the tips of the Christmas tree are painted in White color paint. Make a base for a Christmas tree from brown plasticine. Use an asterisk for decoration.

The next craft is a little more difficult to do. Here it is worth using beads. Therefore, if your child is small, then control this process yourself. Glue the beads to the cone with a glue gun.

All the above crafts from cones can not only decorate your home. It will be nice to present such Christmas trees as a gift to your loved one.

The next craft looks more voluminous. And to create it, you need a few cones. As a basis here, you should use a cardboard cone. After that, the cone is glued with cones on all sides. In this work, it is customary to use a cool gun. As soon as the glue dries, glue the Christmas tree with large beads.

Simple tinsel Christmas trees.

If you read this article, you will be able to learn how to artificial Christmas tree at home. Above, we offered you ideas for Christmas trees that were made from cones. Now we suggest using tinsel for this work. Naturally, for such a craft, you must purchase the tinsel itself. For Christmas trees, make cardboard cones. Then, glue the tinsel to them. In this case, the tinsel should be glued to the cone in a spiral. While working, arm yourself with a glue gun.

Candy Christmas tree.

The next tree may not only be beautiful decoration, but also very nice gift. To make such a craft, make a cone. Fix the candy on it with adhesive tape, and then wrap the Christmas tree with tinsel.

A simple and voluminous Christmas tree made of paper.

The next craft is also very easy to make. It can be a great decoration for a child's room. new year holidays. For manufacturing, prepare:

thick green cardboard
markers, glitter, paints,
scissors and glue
scotch.

Progress:

We bend a sheet of cardboard in half and cut along the fold with scissors.
We put the two parts that you have turned together together and bend in half again.
Opposite the fold, using a marker, draw a half of the Christmas tree.
Now cut along the drawn line. As a result, you will get 2 trees that will not differ from each other in any way.
Gently bend each tree in half. Mark the center.
Next, make an incision on one of the trees. The incision should be long from the very top to middle line. On the other tree, the cut should be from the bottom to the middle.
Now we connect the Christmas trees by inserting them into the resulting cuts.
And to make the tree more stable, use adhesive tape.
That's all, now proceed to decorate your Christmas tree. Use your imagination and handy materials here.

And here is another version of the Christmas tree, which you can do in the same way from old box from cardboard.

Elegant Christmas tree made of paper.

If you want to know how to make a Christmas tree beautifully, then the following idea was created especially for you. For such a Christmas tree, prepare:

colored paper,
scotch,
glue and scissors.

The most difficult thing is to cut strips of colored paper, which must have the same length and width. In addition, each strip must be glued with adhesive tape in order to get a loop. After that, all the loops are glued to a strip of adhesive tape.

You should wrap a cone of thick cardboard with similar garlands.

How to make a glowing Christmas tree.

If you decide to learn how to make Christmas tree with your hands, then you are on the right way. Above we have described some simple crafts. Now it's the turn of serious creativity in order to do something original.

For creative christmas tree prepare:

Flower floristic sphere. For this case, we recommend buying more than one shade of green.
Scissors, PVA glue.
Thick cardboard for the cone.
Cellophane, pins, garland, floral wire.
Various decorations.

Progress:

First, we make a cone from cardboard.
We wrap the cone with cellophane.
In a container, dilute the glue with water.
We cut the floristic mesh into pieces and lower each piece into containers with glue and water.
Now stick the segments on the cone. At the same time, the joints are glued again for reliability.
Use pins to keep your craft from coming apart at the seams.
As a result, you have the first layer of the Christmas tree. Make the second layer in the same way. Remember that after gluing the second layer, the structure should dry well.
If the glue is dry, remove your Christmas tree from the cone.
A garland is placed inside the Christmas tree.
Now just decorate the Christmas tree as you wish.

Tree of threads.

If you want to have something unusual for the New Year in your house, then in addition to standard decorations, decorate your house various crafts on New Year's theme.

The creation of the next Christmas tree is also quite easy to handle. Take a sheet of drawing paper and make a cone out of it. Coat the cone with glue and start wrapping it with green thread.

When the glue dries, separate the cone from the paper.

Decorate the finished Christmas tree various accessories. Ornaments are also glued to the Christmas tree with glue.

Finally

Spend your New Year bright! Make a variety of different Christmas trees that can make the atmosphere in your home truly magical.