DIY tabletop Christmas tree made of paper. DIY Christmas tree made of threads: video master class at home. Christmas tree made of beads: a master class on bringing the idea to life

Universal choice gift ideas for any occasion and reason. Surprise your friends and loved ones! ;)

DIY Christmas (and not only) trees: master classes

Almost all Christmas trees presented today are made using different materials. Some are very unusual, artsy, rich. I would even say elite. And others, on the contrary, are as simple and minimalistic as possible in their design. A la Ikea, so to speak.

DIY paper Christmas tree

The largest group today. You will see many representatives of the beautiful spruce species. Each one is different from the others, so choose

Origami

The simplest version of a paper Christmas tree is using a square. Fold the square in half (diagonally), bend the opposite sides to the center (like in an airplane) and that’s it.

Tip: Use this simple trick to decorate a greeting card or fold napkins beautifully.

Angular

First of all, fold a square of paper as shown in the photo. Then:

Fold the structure so that the side corners are inside. This will result in a square four times smaller than the original one.
Bend the right corner to the center,
And left.
Fold the right corner to the right.
Fold this corner under yourself.
Do the same with the second one.

Now turn the structure over and repeat steps 2-6 only for this side. All that remains is to trim the sharp lower tip and make a few cuts on both sides. Then bend each cut end and place the Christmas tree on the table)

Circles

To create this spruce, take paper and draw a circle on it, outlining it as necessary, as in number 1. Next, cut out the circle and cut each section to a small circle. Now wrap each of these small sections on both sides with the tips inward and glue them together. Process the entire circle in this manner.

For spruce you will need several rows. In the photo, for example, you see a beauty made of 15 layers with a cone top. The layers, by the way, are assembled onto wire by piercing the centers of the parts.

Panel for kindergarten

IN kindergarten Have you been given the task of making a spruce tree together with your child? Then this option is the simplest. Take thick cardboard and colored paper. Cut out triangles from cardboard, cut the paper into strips and overlap them. Even a child can handle this. Cut off the excess. You can glue a skewer at the bottom and stick it into the padding polyester.

Tip: the resulting product can be used as a bookmark.

Making crafts using available materials

To create this semblance of a fluffy-coniferous creature, you will need a long metal pin on a stand and lots and lots of scrap paper. Feel free to use newspapers, old magazines, etc.

Tip: Additional decoration of the Christmas tree can be done using paint in a can, which can be sprayed on the leaves. This will make them stronger and more durable.

Big tree of knowledge

The next beauty will be the spruce tree that brings knowledge. For it you just need to stack all the available books in a pyramid. I highly do not recommend hanging an electric garland, as in the photo: fires in New Year happen very often, do not neglect it. It’s better to put regular tinsel and balls on the ledges.

From tubes

Incredible simple technology. Suitable for decorating cards and walls. Prepare several tubes rolled from paper rectangles. Glue each one in the intended place. The tubes can be made gradually smaller or with a “brush” (sometimes placing longer elements higher than necessary).

Glue button or sequin decorations on top.

Fluffy

For this you will need a lot of paper strips, which will need to be glued in layers to a paper cone. And put on a cute cone hat on top. An excellent craft that can be done with children too.

For those who are passionate about quilling

Do you like to twirl paper spirals? Then prepare several strips of paper of the same thickness. Roll 17 pieces into a spiral and narrow one end of each. For the trunk, simply roll 4 tubes and place on a skewer. Glue all parts according to the photo. The tips of the “branches” can be decorated with cylinders of a different color, similar to Christmas decorations.

Vytynanka

I remember my sister once mentioned that she liked the so-called vytynanki - one of the types of Slavic folk art in which paper is cut out amazing beauty things. They are often glued to glass to enhance the festive atmosphere.

And they are made like this: the desired pattern is drawn on paper in advance. IN in this case- spruce, folded in half. And then, using a well-sharpened stationery knife, all unnecessary parts are cut out. For the spruce you will need two parts folded in half, which can later be sewn in the center on sewing machine or manually.

From corrugated paper

Continuing paper theme, I want to show you three simple Christmas trees. First, with blue roses, which are made from tissue paper (like corrugated paper, but much thinner). Each rose is created using a strip that is tightly curled at the center and slightly looser towards the end. Thanks to the properties of paper, roses easily straighten and become lush.

The base is again a cone.

The next spruce tree is very similar to the previous one, but here the strips used to create the flowers are cut along the edge, making them very fluffy. They are again rolled into a flower, but they do not try to give the appearance of a rose, but simply soak them as much as possible.

From cupcake tins

Well, that's an interesting idea. I have just a bunch of these molds that seem to never be useful to me (I would rather buy silicone ones). Cut the bottom off each and cut from one edge. And stick it on a paper cone.

By the way, you can use scraps to make a flat Christmas tree for a postcard, as in the photo in the master class.

Fabric Christmas trees

Floral

This beauty will require a lot of circle flowers. For them, cut out several circles of fabric and burn the edges. It is better to take organza, veil or something similar. Then collect each flower on a string and decorate the center.

Spruce is out again paper cone at the base

From felt

To create these tree pendants, use soft (for the base) and thick (for other elements) felt and beads. Patterns can be made directly from the photo. All that remains is to cut out the parts from felt, which then need to be sewn with a running stitch and stuffed. Well, decorate, of course

You can give such a Christmas tree to a guy - it will be very touching

From satin ribbon

Prepare beads, satin or grosgrain ribbon(or maybe even lace?), thread and needle. All you need to do is string beads and ribbon loops onto the thread alternately. The main thing is not to forget to secure it at the beginning and end of the product.

From balls

The essence of creating this wonderful Christmas tree is to create a huge number of fabric balls. For each of them, cut out circles and tie with thread, laying a running stitch. Put a little padding polyester inside and pull it off. Each such ball must be glued to the base.

The base can be a foam cone, a paper cone, or sewn from fabric. You can also decorate the spruce in the form of a topiary; for this you will also need a pot of polymer clay and sprinkles to create the effect of an earthen mound.

This is such a beauty nautical style I got:

Other materials or need for invention is cunning

Sorry, dear readers, I in no way want to offend anyone. It's just an expression the best way describes the impossibly diverse number of materials with which people manage to create Christmas trees :))

From beads

Quite not simple, but interesting Christmas tree. To create it, prepare chopped beads, a couple of beads and thin wire for working with beads. First, string the top, as in photo 1. Then make four upper paws- this will be the top.

Now prepare the branches, in each of which make several loops - smaller for the upper branches, larger for the lower ones. Collect them all into one trunk, wrapping it across with thin wire.

From plastic bottles

I respect this master class for careful attitude to nature and waste recycling. Take plastic bottle, cut off its smooth central part, which is cut into fringe. The lid will go on the top, the bottom can be used as a supply. Glue all the cut elements to the central rod.

From spools of thread

My friends, if you have a number of wooden thread spools, then know that you are the owner of a treasure with which you can make an amazing tree. To do this, clear all the spools of thread and glue the very bottom row onto the round dense base. Then glue row by row onto the existing ones below. Simple and stylish

From candy

The base will again be a paper cone. Attach a row of regular tinsel to it, then a row of sweets, then again tinsel, etc. On the top you can glue the most delicious candy(as a star). One minus - there will be nothing left of the tree quickly

From the bark

Strict Nordic Christmas trees. Which can be made if you have a paper cone and a little (okay, a little more than a little) bark on hand. The pieces need to be glued in rows so that the tree looks like a spruce.

I just ask that you don’t spoil living trees for this. Better look for something that has already been knocked down by a thunderstorm. By the way, the method with small pieces can also be used with CDs.

From sticks

Let's continue the theme of nature. This time we are decorating holiday boxes. Use chopsticks to lay out a semblance of a tree, which, in turn, decorate with threads, buttons and other decorative details.

From clothespins

I definitely need to make one like this for the New Year))) I have a dozen or two clothespins with hearts, it will be cool) In general, all you need is to build a rod with a stand. For example, a lid with a spoke. And put “branches” on the knitting needle. You can insert lollipops into the edges.

Bohemian

And we will make this spruce using feathers. The principle is the simplest - glue the feathers in rows from the bottom. By the way, feathers can be purchased in woven ones. But I don’t know what they used to paint it green. Maybe someone can tell me?

From wire

Build the frame like this: wrap three circles of wire around something round (cans, buckets, etc.), so that each next circle is smaller (or larger) than the previous one. Then take three pieces and use thin wire to tie them together at the top and in the same place on each circle.

All this can be turned around a beautiful garland. If you get creative, you can even hang a few Christmas tree decorations.

Made from mesh (and sisal)

Such a Christmas tree can be built in a few minutes. To do this, take a mesh or a sheet of sisal (read what it is). Place on a paper cone and wrap in several layers. Secure the top with a cord, wrapping it in a spiral around the spruce. Decorate with Christmas tree decorations.

And now is the time for the most minimalist Christmas trees, which will decorate the house and won’t take up much space.

From... Christmas balls

Here's a pun - a Christmas tree made of Christmas balls. Nevertheless, it looks great. For some reason I immediately imagined such a structure at some cool corporate event of a large company - it looks very status-worthy.

Making one is not at all difficult: take several dozen green (or whatever you want) balls and tie a thin thread or fishing line to each one. The most difficult thing is to measure the length correctly. Do this: Determine for yourself required quantity balls for each row and, based on this, estimate the length of the thread. The higher the ball, the shorter the thread.

Symbol

This is exactly what the next two coniferous trees can be called. The first is located on the wall and is made up of pieces of tinsel imitating fir branches. You can attach it with double-sided tape so that the ends do not stick out.

The second one was simply skillfully assembled with the help of many paintings, badges, souvenirs, etc., which were collected in the likeness of a spruce tree. Notice how some elements seem to imitate toys that are located on the tree. Interesting idea By the way, for an original gift on February 14, winter will still be in force, so a Christmas tree will be quite appropriate.

Well, dear readers, it’s time for me to say goodbye to you. The spruce hit parade is over, share your impressions: what inspired you, what you will take note of, etc. Be sure to tell your friends on social media. networks using the buttons below. Bye!

Sincerely, Anastasia Skoracheva

An original beautiful Christmas tree will decorate festive interior. Of course, you can’t dance around her, but such a miracle will definitely lift your spirits. This is so interesting table craft can come from the simplest things that are found in every home.

Necessary materials:

A4 sheet, cardboard;
dense threads (preferably wool mixture);
2 “yolks” from kinders;
wooden sushi sticks;
plasticine;
Styrofoam;
stationery knife;
stroke corrector;
red nail polish;
PVA glue;
fabric scraps;
little things for decoration.

Make the frame of the future Christmas tree from A4 sheet - roll it into a ball. Insert foam inside.

Apply glue to the surface of the cone in thin strips and wind a thread around it.

Secure the end of the thread with glue.

Sushi chopsticks will serve as legs for our beauty. To do this, they need to be painted with a corrector.

While they are drying, make boots from the “yolks”, as shown in the photo.

Fill them halfway with plasticine and wrap them in cloth.

Insert the stick legs into the boots, decorate the Christmas tree with various bows and ribbons. Paint stripes of legs with red varnish. ready!

You can make a hat out of cardboard, cover it with fabric and sew on a pompom.

DIY shabby chic style Christmas tree

Let's make this amazingly beautiful and original craft V fashionable style shabby chic.

Necessary materials.

For the base we take a large one Paper cup or any plastic dishes. Separately, dilute alabaster or gypsum with water to the thickness of liquid sour cream and pour it into the future pot. We secure the trunk of our tree, plant the branch in the center and fix it in this position until it hardens.

We make a cone out of cardboard using a stapler.

We make the top of the spruce from wire and foam rubber.

We connect the top to the trunk and attach the cone.

We wrap the base of the tree with white fur.

We cut off the excess from below.

Then we bend the ends of the burlap inward and attach it with hot glue.

Let's get to the fun part - decorating our Christmas tree in shabby chic style.

To create the finished composition we will need a stand.

We make a bench from a bamboo napkin.

From white fur- snowman.

We attach a bell to the top of the spruce.

We decorate the New Year tree with beads, pearls, flowers, lace, etc.

Apply transparent glue to the very top of the tree.

And sprinkle artificial snow.

We do the same with the bench.

Our composition “Winter's Tale” is ready!

Decorative Christmas tree made from napkins

We will make it from cardboard and single-layer napkins. You will also need beads for decoration.

First of all, let's build a frame for our Christmas tree. We roll a cone out of cardboard, fasten it (I stitched it with thread) and cut off the bottom of the cone exactly so that it can stand.

The base is ready, put it aside for now. Now let's move on to napkins. We will make roses from them. Single-layer plain paper napkins are suitable for us.

Take a napkin and cut it along the folds. Then we fold it in three and cut along the folds again.

We fold the resulting strips in three and cut them again. We got a square equal to 1/9 of a napkin.

We fasten this square in the center with a stapler.

Then cut a circle out of it. Mega-precision and accuracy are not required here at all; the finished rose can be slightly adjusted with scissors.

This way a rose is formed. If the finished rose seems uneven to you, then you can trim it with scissors.

The number of such flowers depends on the size of your cardboard cone. My Christmas tree was 21cm high and I needed 59 roses for it.

When all the flowers are ready, we return to the cone. Starting from the top of the head, glue the flowers onto the cone so that the base is not visible. I glued it with hot glue (it’s more convenient for me), but ordinary PVA will do.

I made a Christmas tree out of napkins of two colors. If you also decide to create your own craft from multi-colored roses, then you can safely experiment with alternating them on a cone. If the result does not suit you, you can always tear off the flower and re-glue it to another place. In this case, only the lower layer of the flower will be damaged. We simply tear it off (the bottom layer). The rosette will not lose its appearance.

So, we glued the flowers to the cone. The Christmas tree itself is ready and you can stop at this stage.

I also decorated it with beads - I glued it with the same hot glue, PVA won’t help here.

DIY decorative Christmas tree made from napkins

As you can see, even a beginner can make such beauty, so you can safely involve children in the process.

Another option for a Christmas tree made from napkins

Crafts made from cones, balls, ribbons and beads

How to make such a craft - watch the video tutorial at the end of the article.

Christmas tree made of plasticine with candies

What do we all associate with wonderful holiday New Year? With the smell of pine needles, bright lights, garlands, sweets. And children still create unusual crafts with your own hands, thereby bringing closer the pleasant moment of the onset of a fabulous night. They love creativity lessons on this topic most of all. It is in crafts that you can realize any fantasies.

We suggest making an elegant Christmas tree that can be easily decorated with candies. Make a craft from plasticine - the cheapest and most popular material. You will definitely do beautiful souvenir, if you follow our tips, they are not difficult.

To sculpt a Christmas tree with your own hands, prepare:

green plasticine for the crown;
stump in the form of a cap or an empty spool of thread;
toothpick, red and white plasticine for candy.

Select a green block of plasticine from the set. The body of the Christmas tree itself will be made from it, and in the future we will make small candies as toys. Certainly, small souvenir It doesn’t have to be green; any other color you choose will do. If you manage to find a set on sale that contains a gold bar, then this option will look rich.

Knead the entire prepared block thoroughly in your hands and prepare for further work. It is necessary to form a cone-shaped crown, and not quite the usual flat one, but a curved one, similar to the cap of a fairy-tale gnome. Because the we're talking about O magical holiday, then it is not forbidden to fantasize and create something incredible.

Pull all the soft plasticine into a long cone. Make the upper part as sharp as possible, press the lower part around the circumference with your fingers, showing the skirt. Then take and bend the entire structure to the side. Sometimes the Christmas trees do not stretch up perfectly straight, but lean to the side like this.

To model Christmas tree decorations - small candies - use white and red plasticine. Form red round tablets (the inner part of the candy), as well as white triangles (the twisted part of the candy wrappers).

Glue delicious candies together. Stick on each red round white dot and press in the center with a toothpick. Glue the triangular pieces on the sides.

Make enough decorative details to fill the entire surface of the Christmas tree, evenly distributing the candies around the circumference at some distance.

Glue all the resulting blanks to the crown. Beautiful New Year's craft it's almost ready. Press down a small lid - a stump - from below (or mold it from plasticine).

And the top is still missing. She just begs to be added to the resulting fairytale Christmas tree. Come up with some option, for example the same spruce branches in combination with red berries. All this looks festive and bright.

This is such a fantastic Christmas tree. This elegant option crafts for the New Year, which will be a great gift for your favorite holiday.

The New Year is just around the corner - you need to hurry up to get everything done.

How to make a card like this.

DIY felt Christmas tree

Let's do Christmas trees made of felt - this is excellent Christmas decoration and perfect for school or kindergarten.

Prepare for them:

Set of colored felt;
cotton wool;
glue "Moment" transparent;
any beads;
threads for knitting and sewing;
a needle;
scissors;
felt-tip pen.

Select matching colors felt. These can be different shades of green. Or you can show your imagination and make an unusual red or blue spruce. Fold a couple of sheets of felt together and draw the shape of a fir tree on the top one.

Cut a piece of felt with a pattern along its entire length and fold it in half as shown in the photo. We do this only if the felt is not very thick, otherwise it will be difficult to cut 4 layers at once.

Cut 4 blanks into shape.

To give them a bulge, put a little cotton wool, as shown in the photo.

Lubricate the edges of the workpiece with glue.

Cut a piece of knitting thread and attach it to the top of the workpiece, directly on the glue. It can be hung from it. Attach the second piece and press along the edge so that both parts stick together.

On a light Christmas tree, make stitches with threads of a darker green color. This will add originality to the craft.

Decorate the second with a border of pearl beads. To do this, make a layer of glue along the edge and place beads on it.

Now let your little one decorate them however he or she wishes. After drying, the craft is ready for use.

Such simple craft will be a great decoration for your Christmas tree. It can be given to grandparents. Older children will be able to do it completely on their own. Using this principle, you can make any felt decorations. Whatever your imagination suggests.

From natural materials DIY video tutorial with foamiran flowers

Christmas tree sachet - to create a festive aroma

A sachet is a small bag filled with dry fragrances that is used to create a fragrant background in a clothes closet or chest of drawers. If you place such fragrant bags on shelves with things, a pleasant and subtle smell will settle in your closet.

Making such a sachet with your own hands will not be difficult, and if you create it in the form of a New Year tree, then in addition to the aroma - festive composition It will also set the appropriate mood.

Materials for the master class:

Citrus peel;
orange essential oil;
threads, needle;
beads, beads, sequins;
satin ribbon;
green cotton fabric;
scissors and pencil.

Draw a spruce template on a piece of paper and cut it out.

Finely chop the citrus peel, and to add a greater aroma, you can also add a few drops of essential oil.

From thin green cotton fabric, cut out two blanks according to the template, fold them right sides inside and sweep away.

If possible, sew and finish the edge on a sewing machine; if this is not possible, process the edges by hand.

Turn out.

Make a loop from a silver thread with a voluminous knot at the end, using a needle or hook, thread the loop into the top of the spruce.

Tie a satin ribbon into a bow and secure it at the top with a couple of stitches.

We fill the craft with aromatic citrus peels and sew up the edge.

If desired, you can decorate the sachet tree with your own hands with various beads and sequins.

Our affordable and easy-to-make sachet is ready, now its aroma will delight and beautiful appearance will give you extraordinary and festive energy.

Photo of Christmas tree sachet with orange scent

Christmas tree toy made from pasta

Good afternoon Dear friends. We continue to prepare for the New Year and prepare crafts for this holiday that can easily be turned into gifts. In the last article we looked at it in general, and today we will create Christmas trees in a narrow manner. Link previous article.

Today's crafts will be made exclusively from paper. And there are so many instructions that with a normal approach, even a child can handle creating a Christmas tree. And if you don’t think it’s enough, you can try to make or create it yourself.

Well, for now we will begin to create beautiful forest beauties that will decorate your home throughout the holidays. And if you make a few pieces, you can assemble a whole fairy-tale forest on the window.

Take a regular sheet of paper. Of course, ideally it is better to take green, but white will do. We bend the sheet in two along the long side and draw the diagram shown in the photo below.

After applying the design, cut along the lines and bend as shown below. We make three blanks, and then glue them together. It turns out very beautiful and stylish. I am sure you will not see such Christmas trees anywhere else.

The following set of templates for making will allow you to create a Christmas tree in 3D format. You need to save and print the templates. We draw the diagram on a sheet of paper folded in two along the long side. And then we cut it out.

We cut along the main contour, and where the lines go inside we only make cuts. We bend the cuts at the end. Here, too, it is necessary to make two identical blanks in order to glue them together at the end and get volume.

If you wish, you can cut out more than just a Christmas tree. And a Christmas tree together with a fawn or a small Christmas tree standing next to it.

If desired, any craft can be painted to make it stand out from the rest of the Christmas trees. You can also use paints that glow in the dark.

And here is proof that children really love to do their own handicrafts.

Our beauties are ready. It turned out simply gorgeous. How do you like this idea?

For the next Christmas tree, it’s better to immediately take colored paper and immediately make a green Christmas tree. The tree is created from loops and curls.

On that score, if there was something you didn’t understand from the photo, I’ll leave a video on how to create such a masterpiece.

Christmas tree using origami technique (simple diagram for children with description)

Many people have been able to fold various figures from a sheet of paper since childhood. Well, remember airplanes or boats did all this simple technique origami. And I simply cannot help but talk about the fact that you can make a Christmas tree using the origami technique.

In order to fold the Christmas tree, you need to find an old book without a thick cover or a notebook with writing on it. Found it? Now let's continue, we wrap all the pages from the left corner to the middle. And so on every one. Therefore, a book that is too thick will not work.

Then we bend all the pages into a bag again.

The lower ponytail will need to be trimmed using scissors. Try to do everything slowly and carefully.

The product is completely ready. All that remains is to straighten out all the pages and sprinkle them with glitter.

How about this idea? The Christmas tree is a little more complicated to make, but it turns out more beautiful. First, train on a white sheet, and then when you understand the whole process, you can do it on a green one.

The following beauty can be offered to the children to make at a labor lesson in primary school. All instructions are provided below.

How to make a three-dimensional Christmas tree from corrugated paper for the New Year 2019

As promised above, today there will be various options making forest green beauties. And for the next craft you will need special corrugated paper or crepe paper. You will get a very beautiful Christmas tree.

You will need to find:

cardboard or thick paper
corrugated green staple paper
scissors
red paper
various bows
beads

Production stages:

We make a beautiful tall cone out of cardboard and cover it with green paper.

Make the strips about 10 cm long. We wrap each strip on a thin wooden stick or on a small brush to make a bud like this.

Fluff each bud and glue it to a paper cone. For a cone about 10-15 cm high, you will need to make over a hundred of these curls. To decorate the Christmas tree, you can use both ready-made and homemade bows. Christmas balls can be made from cotton balls sprinkled with glitter.

If the first option is too difficult for you, I suggest another option for making a Christmas tree from corrugated paper. It is less labor intensive.

We make the base of the Christmas tree from cardboard. You will need green paper, 18 cm wide and 2 meters long. We fold it in two along the entire length. Apply glue to the edge, leaving a free strip of 2 cm.

Glue and pull together to make a small skirt.

Next, we decorate our cone in a spiral with this blank. Don't forget to glue the strip to the cone. Finally, we decorate with improvised toys.

Or here’s another option for making a New Year’s beauty. We cut multi-colored strips 2-3 cm wide and wrap each strip around a cardboard cone to the very top.

Or you can do it like this.

New Year's beauty made of colored paper and cardboard

To make such a Christmas tree you need to make some blanks, three semicircles of different diameters. On each semicircle we make small cuts to create a fringe.

Then use scissors to twist the fringe. And we glue cones from the blanks. Well, then, on the large cone we put less on the middle cone and the smallest one. At the end we will make a beautiful star.

Here is a similar option, but in the video there is a small life hack on how to quickly and beautifully cut these circles.

But such Christmas trees will look very organic on the holiday table. All are made from the same paper circles various shapes. By the way, if the question of preparing salads is still open to you, here are some tips.

Or this option for making Christmas trees from simple wrapping paper.

Well, if you want to make something big, beautiful and warm, you can make a big beautiful New Year's beauty. What to do big Christmas tree you need to glue several sheets of cardboard together. Roll them into a cone.

Wrap the resulting cone in beautiful wrapping paper.

After removing everything unnecessary, decorate the Christmas tree with improvised toys and a star.

You can also make a Christmas tree from cardboard, but we won’t make cones.

You will need to print this stencil.

Next, cut out the resulting stencil, apply it to sheets of cardboard, trace it and cut it out. Fold in the middle. We make 8 identical blanks.

We'll go through the edges with a hole punch. If you have a figured hole punch, you can use it. We glue the middles together using double-sided tape.

Then we sew with white thread along the holes made. And we also cut out the star.

Finally, it is advisable to decorate with artificial snow and white sparkles.

Try making a colorful Christmas tree like this from paper circles and a wooden stick.

Or try making the same Christmas tree from candy wrappers and magazine clippings. Finally, coat the tree with glue and sprinkle with flour or sugar.

You can glue a Christmas tree from paper handprints. Preschoolers will really like this work.

And here is another master class on creating a Christmas tree from a glossy magazine.

And with such a Christmas tree you can decorate your workplace. You will need a green piece of A4 paper. We cut out a triangle and make a hole in the middle with a standard hole punch. We unfold the accordion and put it on the improvised trunk. Which can be made from the same sheet of paper rolled into a tight tube.

You can find these tips on the Internet. By the way individual elements You can use the space around you as decoration.

A Christmas tree made from loops is something new; I really wanted to make something like this myself.

Another option for making crafts from loops.

Here's another idea on how to make a Christmas tree from improvised materials.

Let's return a little to decorating the office table. The next tree will be made from reminder leaves.

And even a preschooler can cope with this task.

Maybe you haven't tried making a Christmas tree using the quilling technique? So here's a good idea for you.

Master class on making a New Year tree from napkins

Yes, you can even make a beautiful New Year's beauty from napkins.

In order for you to get such beauty. You need several layers of napkins. Draw circles on a napkin, cut them out, and staple each circle in the center. Afterwards, crumple each layer to form a circle. Here are photo tips to help you.

You can decorate such a Christmas tree in the style of topiary.

Christmas tree stencils for cutting and printing

If you prefer the vytynanka style and you like painstaking work. I suggest making a Christmas tree to decorate the windows. Using this template you can make a Christmas tree in 3D.

We will make slits on one piece from the top and on the other from the bottom. And let's connect them together.

The stencil is printed.

Folds in two and is gradually cut out.

One craft is assembled from two blanks.

And here are your templates that will help you create this stunning beauty.

Do-it-yourself voluminous Christmas tree for a New Year's card

Each of our friends or acquaintances will certainly be waiting for gifts and congratulations on New Year's Eve. And for every gift or congratulation you can make an original card. And I will help you with my tips on how you can make a beautiful paper card with your own hands.

To make the most simple postcard you will need to print out a small blank. Make cuts along the lines and fold and glue to the main background.

If you don’t understand something, here’s help in the form of a video clip.

Or try making a card like this.

Paper Christmas tree on the wall

Who said that a craft should be small and remote. I propose to make a large Christmas tree that will be mounted on the wall. There are immediately finished options, and there is an option in the form of a coloring book that you can color as you wish.

The first Christmas tree will be like this. We will make it from cut strips.

The second option will need to be downloaded and printed. Then collect it on a large sheet of Whatman paper.

Of course, these are not all the options for Christmas trees that you can make for the New Year holidays and decorate your home, office or room with them. But these options seemed to me the most beautiful and more New Year's. Happy new year to you.

We will send the material to you by e-mail

Not everyone was born great creators, and sometimes people are simply afraid to try their hand at handicrafts, and in vain. If you follow the advice and instructions from the editors of the site, it will not be at all difficult to make beautiful and elegant Christmas trees from paper and cardboard (voluminous) for the New Year!

Paper is always in demand, and especially on New Year's Eve, because it is such a wonderful material for applied creativity! Paper products with careful handling and storage they can last more than one holiday, but modern material– bright and colorful, which allows you to fully use such decorative crafts in the interior.

We invite you to learn how paper Christmas trees are made and make the same beauty yourself.

Creating a three-dimensional Christmas tree

For those who don’t remember how to work with paper, we will remind you of a few simple rules:

We do not allow any errors in paper sizes. If you need a square, it will be a figure with equal sides; if you need a rectangle, let it be a rectangle, even and beautiful;
all fold lines are usually carefully smoothed with a fingernail - the accuracy of the folds allows you to assemble full-fledged high-quality products;
the paper should not be of poor quality and tear at the slightest attempt to bend or cut it.

To assemble a voluminous fluffy Christmas tree you need scissors, colored paper and a little glue.

Illustration	Description of action
	We use green paper. We turn the sheet into a square by bending one corner so that the edges coincide with each other. We cut off the remaining strip and remove it.
	We need fold lines, so we fold the sheet and iron the resulting folds, first along one diagonal of the square, then along the other. Then fold the paper in half.
	Unfold the product partially, leaving one corner folded.
	We bend the free corner to the folded part, as in the photo.
	Now the resulting trapezoid needs to be turned into a square by pulling it by the middle of the base and bending it to the right corner.
	It turns out to be such a figure in a spread.
	We bend each of the corners sequentially towards the center. Turn the product over and do the same on the other side. Let's unfold one corner and bend it inward.
	We do this with every corner.
	Cut off the bottom part of the resulting tie.
	It is necessary to make slits on the sides of the product.
	Bend down each side of the tree top part from the cut to the base.
	Straightening the branches of this fluffy beauty!

Funny spiky Christmas tree made of paper tubes

Everyone has heard about weaving from newspapers, but not everyone is ready to master it. But trying to make paper tubes and gluing them to the base of the Christmas tree is a simple and interesting activity.

Those who want to master weaving from newspaper tubes should be patient: first you need to prepare a considerable number of tubes. To do this, the newspaper is cut into strips 5 cm wide. Each strip is wound onto thin knitting needle under acute angle, gluing the free tip with a PVA tube at the end. Then they decide how the product will be painted: straight tubes or ready-made craft. Coloring can be done using any in a convenient way. Someone dips the workpieces in paint, stain, someone paints them with a brush on a grid. The finished Christmas tree can be painted with a spray bottle.

Video: beautiful wicker Christmas tree

Cute fluffy Christmas tree for opening cards

A child can make paper Christmas trees for the New Year under the guidance of an adult. Needed for crafts colored paper, card base, PVA glue, simple pencil and scissors.

How to make a box Christmas tree from cardboard or thick paper: excellent packaging for a gift

Sometimes you wonder what to pack New Year's souvenir or delicious gift. Handmade packaging will always touch the heart of the recipient, so let’s spend a little time in creative work.

Advice! It is better to decorate the box with beads, snowflakes, and sparkles.

Let's make a three-dimensional Christmas tree from paper and cardboard with our own hands and decorate the interior

There are many simple and chic ideas for using a DIY paper Christmas tree for decoration. New Year's interior rooms. A voluminous beauty, even if it was not brought from a store and did not grow in the forest, will wonderfully serve to lift the mood for the holiday.

Volumetric Christmas trees: conical base

First of all, let’s figure out how best to make a cone for a Christmas tree out of cardboard. A dense, durable cone is a guarantee that the product will last forever new year holidays without deformation.

For the cone, cardboard, thick paper and leftover wallpaper are suitable.

How to beautifully decorate a cone base

A cardboard cone is easy to use different decorations turn into a fairytale Christmas tree. The simplest solution available to everyone is braiding a cone with paper fringe. It is better to make fringe from corrugated paper. But if it is missing, then regular colored paper will do: cut strips of the required width, glue them into one long strip. If you carefully fold them several times without creasing the edges, you can immediately cut a beautiful fringe along the entire length.

Christmas trees made of cardboard from blades

Following the principle of creating a product from blades, it is not difficult to make a Christmas tree of any size. The essence of the work is to prepare two, three or four identical templates of the silhouette of a New Year's tree with slits at the top and bottom. No glue is needed for assembly, the craft will stand without any problems.

From two templates you get a four-blade Christmas tree.

Volumetric Christmas trees: carved art of vytynanka

Many people are familiar with the paper cutting technique called vytynanka. We suggest creating a Christmas tree magical beauty using paper, a pencil (or a printed template), scissors and a cutter.

Christmas tree paper templates

It’s worth taking a look at the idea of a New Year’s tree using this wonderful technique:

Article

With the onset of November, Christmas trees take their places on the windowsills, desks and in shop windows, forest beauties proudly demonstrate to others the festive illumination and Christmas tree decorations in city squares. Making a small semblance of a New Year's tree is not at all difficult. We have collected some interesting ideas for you.

When it's not a problem. And the Christmas tree!

Making Christmas trees from paper straws- enough exciting activity which children will like. The main thing is to pre-prepare tubes of colored paper. The tubes must be different lengths, but of the same thickness. Glued onto a flat surface in the shape of a Christmas tree, they will become a cute and unusual gift.

Christmas trees from the forest? No, from a cone!

The easiest way to create a New Year's craft with your own hands is to make a Christmas tree from a paper cone. The materials and procedure are so simple that they are accessible to both employees and employees with a busy work schedule.

It doesn’t matter what will serve as the basis for making cones: white, colored, craft or crepe paper. It doesn’t matter what serves as decor: rhinestones, beads, push pins or circles of colored paper. The main thing is that the result will always be the same: cute hand-made things that will easily become the basis of the most stylish New Year's composition.

Making master class:

Cut a circle out of paper and cut it in half.
Roll the paper semicircle into a cone and fasten it with glue, a stapler, tape or a regular paper clip.
Attach to the surface of the cone decorative elements. Glue rhinestones; in rows, starting from the bottom, stick white or colored paper mugs; insert curly pushpins.

Using circles of different sizes or colored paper different shades you can create several crafts in the same style.

Curvy shapes are beautiful!

They will help you decorate your workplace or give a small souvenir to your colleagues. volumetric Christmas trees from paper. Schemes for creating New Year's ones offer several options for the paper embodiment of the evergreen beauty. Such a voluminous tree, complemented decorative stars, will certainly look not like a modest souvenir from colleagues, but rather like an unusual designer item.

New Year's quilling

Creation Masters paper masterpieces Those using the quilling technique will also be able to delight others with holiday crafts. Even when creating gifts for a large family, you can be smart and give everyone original surprise, never repeating itself. Using the quilling technique you can create a variety of crafts:

big volumetric panels from many elements;
small decorative figures that will perfectly complement gift wrapping or become an element ;
unusual New Year's pendants;
tabletop 3d figurines;
Christmas decorations;

Fir trees, dense forest...

New Year 2019 will be remembered by both adults and children if you complement the table setting festive table original cards with the names of the guests.

In order to make these simple paper Christmas trees you will need:

From thick paper of suitable colors, cut out an even number of triangles - future Christmas trees.
Secure a wooden toothpick or skewer to the wrong side of the triangle with tape. If you use double-sided tape and glue a small strip of it on the wrong side of the triangle, the Christmas tree will turn out double-sided. In this case, it will look beautiful not only for its owner, but also for his neighbors on the table.
Insert a stick with a paper triangle into chocolate candy in foil of a suitable color.
Write the name of the guest on the Christmas tree (or on a white strip glued to the top) and place the figurine in the middle of the plate.

COLORFUL ENVIRONMENT

For simple and interesting crafts You will need several circles of different sizes and colors. Each circle needs to be folded in the same way as paper is folded to cut out a snowflake. Afterwards, the circles can be slightly straightened and strung onto a vertically mounted skewer ( bamboo stick), fixed at the base for stability.

Made from cardboard doesn't mean ugly

Not always in order to create beautiful craft, rare and special materials are required. Packaging cardboard will be a wonderful base for colorful creations. Simple Christmas tree made from cardboard with candies pasted on can pleasantly surprise you with its beauty!

Cardboard crafts, decorated by children according to their taste, will be a wonderful New Year's gift, which can be prepared together in kindergarten.

The symbol of the New Year 2019 made from ordinary packaging cardboard will look very stylish if you make holes in it using figured hole punchers New Year theme.

Christmas trees made of corrugated paper

A Christmas tree made from special paper for scrapbooking looks original. If it was not possible to purchase such material, ordinary thick colored paper will successfully replace it.

For creating three-dimensional figurine from paper you will need:

Connect two adjacent corners of a square of corrugated paper and glue the sides of the square touching in this way. The result should be a corrugated semicircle. If special paper is not available, you can use regular paper (colored if desired) and fold the square of paper yourself into an accordion shape.
Fasten two paper semicircles together with glue.
Make circles different sizes same or different colors.
Thread the circles onto a reinforced skewer.
Decorate the top with a large bead or star.

Lesson for literati

Even in the era of electronic “readers” and audio books, most people are sensitive to books made of paper. However, not all books are worthy of taking up space in family libraries. And, if not everyone raises their hand to throw them away, then have a hand in transforming them into holiday craft Everyone is capable.

Elki-vytynanka

Perhaps there is nothing more elegant than a neatly carved paper Christmas tree. It seems to be woven from thin lace, filled with air and fragility. It is easy to make using a stencil. Such a tree will certainly become a source of admiration and pride.

Here are some of the templates. You can download other stencils.

Crafts based on templates

Prepare a variety of mini-gifts New Year's beauties without spending a lot of time, they will help ready-made templates. It is enough to print the suitable material on paper, and then cut and glue the figures according to the instructions on the diagrams.