The best Santa Claus craft. Master class with a photo of making Santa Claus from a bottle and spoons with your own hands. Santa Claus from a cork with his own hands

Each house must have its own wizard Santa Claus. Such a charming grandfather will not leave indifferent neither children nor adults. We will definitely put a good wizard under the Christmas tree and admire it, but first we need to make it. In this tutorial, I will show several options for how to make Santa Claus with your own hands with step-by-step photos.

How to make Santa Claus with your own hands

From improvised materials

Since this is a “personal” magician, we will make it from everything that is at hand, namely: from a can of tomato paste, polystyrene foam, plasticine, scraps of fabric and padding polyester, sushi sticks, “yolks” from kinder surprises .

You will also need threads with a needle, scissors, a stroke corrector, red nail polish.

We make boots from "yolks" from kinder surprises.

From a can, polystyrene, plasticine we make a torso and legs.

We cover the body with synthetic winterizer.

We make "skin" from beige knitwear.

We paint the legs with a corrector.

We sew pants.

We try on a mustache and a beard from a synthetic winterizer, we make a spout.

We sew.

We cover the boots with fabric.

We insert the legs into the boots.

Cut out the handles.

We sew button eyes, put a cap on the head.

And in order for our wizard to become truly magical, we will put a bag on his shoulder. You can put sweets in it.

Every morning the child will get a new surprise out of it.

Santa Claus from cardboard and colored paper

The basis of the future Santa Claus is cardboard. You can use a sleeve from toilet paper- then Santa Claus will turn out to be small, or the base from paper towels - then it can be made high. Or you can make a base from any cardboard right size by rolling it into a roll.

What you need:

• cardboard;
• red paper;
• White paper;
• cotton pads;
• buttons;
• glue;
• scissors.

Lubricate the selected cardboard base with glue.

Wrap with colored paper, leaving room for the face.

Then we cut out a beard from a cotton pad.

Glue it to the right place.

We are preparing a hat for Santa Claus. We make a cone out of red paper, fixing the ends with glue.

We decorate the cap with the remnants of a cotton pad. We glue cotton wool on the tip of the cap and along its edge.

Lubricate the inner edge of the cap with glue so that it holds tightly, and dress it to Santa Claus.

From white paper, cut out two mittens and glue them on the sides.

We draw a face with colored pencils or paints. Then glue the cotton mustache.

We decorate the front of Santa Claus's fur coat with buttons. They can be glued, or they can be planted on plasticine. Here is such a cute Santa Claus turned out!

For the next craft, we need red napkins.

You can take any image of Santa Claus, the main thing is that it fits in size.

Or you can download and print our version below in A4 format. Here are three different sizes, can be selected according to the size of the napkins.

Print out required amount.

Cut out.

We take red napkins.

Fold the napkin as shown in the photo.

We make an incision where Santa Claus's hat is, we put a corner of the napkin. We roll a small ball out of cotton wool and decorate the hat.

Ours is ready! She can steal a festive table and surprise her dear guests.

Shell craft

This craft is very simple, but original. It can be made together with children, then used as a decor or as a New Year's gift to friends and family.

We take a shell.

Painted with white acrylic paint.

The eyes are made of black wool, the nose is made of cotton wool.

We decorate the hat with a bead. We attach all the elements with hot glue. Our craft is ready!

What is the New Year without the main wizard? Santa Claus is an obligatory guest in every home. Therefore, today we will crochet an application in the form of Santa Claus!

For knitting we need:

• yarn of red, white and peach color;
• hook;
• scissors;
• black polymer clay or 2 black beads.

Let's start knitting with an amigurumi ring of 6 loops. To do this, we need to knit 2 ch and in the 2nd of them from the hook, perform 6 sb .. At the beginning of the new row, we form 2 lifting loops, as we will knit dc further.. Next, we knit 3 dc in the next 3 loops ..

At this stage, we change the color of the thread to peach or beige, pink. white thread do not cut, but simply lay behind the loops. And in the 3 remaining loops we knit 3 dc ..

We knit 1 sl-st in the 2nd lifting loop. Again we change the thread to white and do not cut the peach thread. We knit 2 dc only in white loops.

In the new row, we will make 1 ch and turn the knitting. Now we perform 1 sc in each loop along the peach loops. Now change the thread to red. Cut off the white thread.

Then we unfold the knitting and do 2 sts .. Then we will knit like this: skip 1 loop and knit 1 dc to the last loop. We do not knit it, but skip it. Turn around and do 2 ch, then knit 1 decrease and knit to the end, do not knit the last loop, turn around and do 1 st.

We knit a beard. To do this, we join the white loops in the corner with a white thread. Cast on 3 sts, then work 4 dc in the same st. In the next loop, we perform 1 sc. Skip the loop and knit 5 dc in a new loop. Next 2 sc, then skip the loop and again perform 5 sc. So we knit to the end of the row.

We join the cap with a red thread and make a binding of the edges of the sc. You can add a lurex thread to the main yarn. The cap will be shiny around the edges.

Now we join the top of the cap with white yarn. We form 3 pp. Next, we knit 7 untied dc. And now we grab the thread and knit only 2 loops from the hook. Then we grab the thread again and also knit only 2 loops. We knit 2 loops until we knit everything. This is a pom-pom.

Now let's make a mustache. We collect a chain of 5 ch. Then we knit 1 sl-st, 1sc, 1 prss, in the last we perform 1 prs and 1 sl-st. And again ch 6 and repeat the action.

We sew on the antennae and sculpt the eyes from polymer clay. You can take 2 small beads. Or you can embroider eyes with black yarn.

Here is such an applique Santa Claus crocheted!

On the eve of the New Year, all thoughts are busy preparing: what to cook, what to give, what to wear, and of course, how to decorate the house. Today we will talk about the main symbol of the coming 2017 - Santa Claus.

The main characteristics of Santa Claus include:

• warm earflaps
• long beard
• red coat
• staff
• gift bag

You can make Santa Claus yourself, together with the children, at the same time telling them where such a symbol came from and which children will get gifts.

Santa Claus from a bottle with his own hands

Desktop Santa Claus can even be made of plastic liter bottle which can be found in every home. You will need:

• liter empty bottle
• colored paper
• scissors
• red and white paint
• buttons
• threads

1. Mark the face and mustache on the bottle with a marker. Paint all other parts red. Use acrylic paints or gouache, adding PVA glue to it for a better overlay. Paint your face in flesh color, and make your beard white.
2. Wrap the transition to the tapering part of the bottle with a white thread - this is Santa Claus's hat.
3. Make a pom-pom out of yarn and disk and attach it to the lid.
4. From threads and buttons, make a belt for Santa Claus.
5. Eyes and mouth can be drawn or small buttons can be used.
6. To make legs and arms, fold long strips of paper several times to make an accordion and glue them to the bottle.
7. Cut out small palms or mittens and glue instead of handles.
8. As boots, you can use round bobbins, pasting them with red paper.

In the company of Santa Claus in the same technique, you can make a snow maiden and a snowman.

Santa Claus: DIY toy

To make a bright and cheerful Santa Claus toy, use one of the patterns below. Depending on your preferences, you can make Santa Claus in the style of Tilda dolls or a more traditional version.

1. You need to purchase small pieces of fabric or use existing scraps, the toy will not require much.
2. Print and cut out the patterns, lay on the fabric and circle, you will need about 0.5 cm for the allowance.
3. Cut out all the details and sew together by hand or on a typewriter, leaving a small opening. Make cuts at the folds so that the fabric does not wrinkle.
4. Turn the parts inside out and stuff with padding polyester or cotton wool, sew up to the end.
5. Gather all the details.
6. Add decorative elements.

DIY Santa Claus costume: diagrams and patterns

To please the baby Christmas gifts he can bring a "real" Santa Claus. To make everything look like in a fairy tale, sew a costume for Santa Claus. Such work will not take you much time.

1. The most time-consuming part of the work is sewing a fur coat. You can purchase a long piece of red fabric, it can be fleece, satin, velveteen, velvet. As well as white fabric for decoration.
2. The size of the fur coat depends on who it is sewn on, below is the simplest scheme. You can take measurements from the "Santa Claus" itself.
3. All parts are sewn together, finish in white. The Santa Claus hat is made according to the same principle.
4. Make a beard from a piece of synthetic winterizer, cutting out several layers and putting them on top of each other.
5. As a staff, use a mop handle wrapped in gold packing tape.
6. Sew a gift bag from scraps.

Santa Claus beard made by hand

The beard is a very important element that will add naturalness to the image, we offer you a few more ideas for creating a beard.

• Option 1: cut out the base from white felt, sew along the edges of the tie and stick cotton balls over the entire surface.

• Option 2: cut a piece of felt oval shape- this will be the basis for the future beard. Felt or thick white yarn fluff and sew to the base, imitating a mustache and beard.

• Option 3: A respirator can be used as a base for the beard, in which case the beard will hold securely. Cut holes for the mouth and glue the remaining parts with padding polyester.

Staff of Santa Claus with their own hands

If you approach the issue of making a staff more seriously, then you can try the following methods.

• Option 1: Glue a Christmas toy on top of the mop handle, which is usually used to decorate the top of a spruce, cover the docking place with tinsel, wrap the base with tape or wrapping paper.
• Option 2: Use a shovel handle, sand the base and cover with white paint, wrap the staff with thin tinsel, decorate the top christmas toy attached to the glue gun, add glitter.
• Option 3: An express way to create a staff is to use foil for decoration. Wrap the base (mop handle, gymnastic stick, etc.) with foil, then wrap with tinsel on top.

Santa Claus's sleigh do-it-yourself

As a gift for tiny and big lovers of sweets, you can lay out Santa Claus's sleigh from sweets, marmalades and cookies. And immediately an ordinary and familiar gift will look magical and festive in a New Year's way.

Christmas candies are suitable as runners, the rest of the sweets are laid on them and the whole structure is tied with a bow. To prevent the surprise from falling apart along the way, you can fasten all the parts with a glue gun or double-sided tape.

DIY Santa Claus mittens

Since Santa Claus lives in the North, it would be very uncomfortable for him without mittens, after all, the years are not the same, you need to take care of yourself. Mittens can be knitted from red yarn or sewn from the remnants of red fabric from the suit.

Santa Claus's mittens are even more like large mittens, so you can use the following pattern to sew them:

Santa Claus do-it-yourself from improvised materials

To build Santa Claus houses, it is not necessary to go to the store, use the materials that you already have at hand.

In the technique of quilling

For execution you will need:

• colored paper
• cutter
• toothpick

1. Cut the paper into thin strips of 0.5 cm and twist into a bundle with a toothpick
2. Remove from the toothpick, let it straighten out a little to make a circle and secure the end with PVA glue
3. From such elements you can assemble a whole Santa Claus.

From toilet paper rolls or rollers for cleaning clothes:

1. the roller will be the base
2. cover it with red paper or felt
3. draw a face
4. stick on a cotton beard
5. a hat can be made from a napkin

Santa Claus in origami technique

Small gifts-postcards in the form of Santa Claus are easy to fold and an ordinary piece of colored paper 10 * 10 cm in size. There are a lot of experimental schemes, they are easy to perform. Involve young children in the work, such an activity is useful for the development of motor skills.

Santa Claus from colored felt with his own hands

Felt is becoming an increasingly popular material among needlewomen because it is very easy to use, does not require edge processing, does not roll up and attaches well. From felt, you can perform various versions of Santa Claus:

• Option 1. Santa Claus is a toy for the Christmas tree: you just need to cut out all the details according to the pattern below and sew them together, add a padding polyester inside for softness.

• Option 2. Santa Claus on a Christmas wreath: More and more often you can see decoration in the form of a Christmas wreath, more characteristic of Western culture. You can decorate the wreath with Christmas balls, branches or felt Santa Claus.

• Option 3. Santa Claus-basket: you will need a thick felt, about 4-5 mm thick, cut out all the details and sew. Put a gift in a basket and hide it under the Christmas tree.

Santa Claus from cotton wool with his own hands

Toys were made from cotton wool decades ago, probably your grandmothers still own this technique and can teach all its subtleties.

The creation process is painstaking and laborious, and the toy turns out to be very fragile. To create such a masterpiece you will need:

• paints
• threads
• wire

Making Santa Claus:

• From the wire, form the frame of the future Santa Claus, all parts of the body except for the head.
• Wrap cotton wool on the frame and secure with threads.

• The next layers of cotton wool are attached with a paste or PVA, apply cotton wool thin layers so that it sticks securely.
• Engage in the manufacture of the head, first form a ball, then gradually fashion the nose, brow ridges, lips, evaluate the proportions, the head should not turn out to be too large relative to the body.
• Attach the head to the body with glue and thread.

• From the wire, form a frame for a fur coat that is attached to the waist.
• Wrap the wire with white thread.
• Close the hem of the fur coat with cotton wool and form a hat, mittens, felt boots, and a beard.

• After complete drying, proceed to coloring.

Santa Claus do-it-yourself pantyhose

Ordinary nylon tights are perfect as a basis for a toy, they stretch perfectly and allow you to form the desired shape. For work you will need:

• light-colored tights or stockings
• synthetic winterizer or cotton wool
• paints
• thread with a needle
• red fabric for clothes

1. To get started, form 3 lumps of cotton wool, one large for the head and three smaller ones for the cheeks and nose. Cut off the toe from the tights and place all three lumps there, sew up the hole.
2. Now form the nose and secure it with pins for ease of use and sew with light threads. Use the same principle to form the eyes and lips.
3. For the body, you can use the remaining tights, cut a piece about 20 cm long, sew one edge and stuff it tightly with cotton.
4. Sew the details together, now take care of the clothes. For a fur coat, use the attached pattern. Make a hat from the remnants of the fabric.
5. Do not forget to add a beard and mustache, make them from the remnants of cotton wool.
6. Now the most difficult part remains - paint the face and the toy is ready.

Santa Claus on a glass with his own hands

Decorated glasses will become an interesting decoration of the table. The trick is that the glass is no longer used as a vessel, but as a candlestick. The New Year's atmosphere of your evening is guaranteed!

You will need:

• wineglass
• decoupage napkins with Santa Claus
• tassel
• PVA glue
• scissors

1. Remove the bottom two paper layers from the napkins, you only need bright picture. Cut out the elements that you would like to transfer to the glass.
2. Dilute the glue with water or cook the paste.
3. Using a brush dipped in glue, carefully spread the napkins over the glass, keep in mind that the glass will stand upside down. Smooth out any wrinkles for a flawless finish.
4. After complete drying you can add some more decorative elements in the form of stars or snowflakes.
5. Put a candle on the leg and put it on the table.

Big Santa Claus do it yourself

Santa Claus can become a real decoration of the interior, if it is done with high quality and with love. For you a master class on making big grandfather Frost.

You will need wire, scissors, glue, a needle and thread, thick cardboard, foam rubber, sintepuh, cotton wool, wool, white and red felt.

• At the heart of the entire body and head is a cone. Its size depends on how big the toy you want to end up with. Cut out a cone and a circle from paper.

• Draw a diameter on the circle and divide it into three parts, the points equidistant from the center will be the legs.
• Wrap the circle on one side with bright felt or cloth, glue the edges with inside, thread the wire through the holes and form loops in place of the feet.
• To the middle of the wire, wind the wire thinner, its length should be greater than the height of the cone. So that the figure does not lose balance, the junction of the circle and the wire must be generously glued with a glue gun.

• From the fabric, cut out two rectangles about 4 cm wide and 10 cm longer than the length of Santa Claus's legs. Sew on the long side, turn inside out and put on the legs. Baste to the bottom of the circle.
• Cut a cone out of white felt, sew and turn inside out. front side out. Stuff it tightly with synthetic fluff and thread a thin wire through it, sew it to the circle with a blind seam.
• Cut out soles from thick cardboard or plywood, they should be larger than wire loops. Glue the soles with a glue gun. Glue foam boots on top.

• Cover the boots with red felt and pull them down.
• Sketch the eyes and mouth at the top of the cone.
• From red felt or fleece, cut out Santa Claus's fur coat, as well as pens. Handles must be sewn and filled with synteph.
• Sew the fur coat directly to the cone with a hidden seam and decorate on top with the decor of your choice.

• Cut out a white collar from white fleece and sew on.
• Sew handles to the fur coat on both sides.
• Further, from the existing wool, it is necessary to comb the beard and mustache and carefully attach them to the face of Santa Claus.
• Form a hat from the remnants of wool, its decor can repeat the decor on a fur coat.
• Santa Claus is ready to please you and your loved ones!

Santa Claus on champagne with his own hands

A bottle of wine or champagne is good gift for the holiday, there are many free days and guests ahead, this bottle will definitely not become superfluous. To make the gift still thematic, you can decorate it by dressing it up as Santa Claus.

Of course, the easiest option is to sew a tiny hat on a bottle and it will immediately look different, but you can also show even more creativity, for example, sew a cover and decorate it as Santa Claus.

1. From red satin ribbon you can also build amazing decoration per bottle
2. To make it removable, you first need to prepare the base in the shape of a bottle, and then wrap it with ribbons
3. At the end, add decor from white felt or fur

Knit a Santa Claus costume on a bottle with your own hands

A suit for a bottle can not only be sewn, but also knitted. Here are a few ideas for you, symbolic simplified versions in red colors or humorous ones with Santa Claus - Santa Claus hanging on the chimney.

Santa Claus - do-it-yourself pillow

Pillows with Santa Claus will help to change the style of the interior and make it more New Year's, it can be a decor made on a regular cover, or the pillow itself can resemble Santa Claus.

In order to sew Christmas cover you will need:

• base fabric
• felt or fleece for finishing
• threads
• needle

1. From the fabric, cut out a cover for the existing pillow and sew it by inserting a zipper to open and close
2. Cut out all parts of Santa Claus's face from fleece: beard, eyes, mustache, nose, hat, pompom
3. Sew all parts to the base one by one, you can use buttons as an eyelet
4. Make a pom-pom out of thread and sew it to the hat
5. Santa Claus's mustache can be made voluminous by stuffing it with synthetic winterizer

With a lot of patience, you can try to cross-stitch a pillow with Santa Claus.

Santa Claus from spoons with their own hands

With the help of disposable spoons, you can create unusual things, including lampshades for lamps, vases and coasters. It turns out that, by turning on the fantasy, you can even build Santa Claus.

You will need:

• plastic spoons
• cardboard
• red paint
• felt-tip pen

1. Cut out and glue a cone from cardboard, it will be the basis for Santa Claus
2. Now, with a pencil, mark the places where the mustache, beard and eyes will be, paint over everything else with red paint.
3. For plastic spoons, break off the base and glue them to the beard and along the edge of the cone
4. Cut out handles from paper and glue on each side
5. Draw eyes and your Santa Claus is ready

If you have only one plastic spoon lying around your house, and Santa Claus needs to be done, then you can go the other way:

Santa Claus from plastic cups

Continuing the theme of creativity from disposable tableware, you can try to create Santa Claus from ordinary plastic cups.

You will need:

• red plastic cups white flowers
• threads
• balloon ik
• fleece for hat
• buttons

1. Glue the cups together so as to get a shape resembling a ball. White cups will symbolize the hem of a fur coat and buttons.
2. Next, the head can be laid out from cups or made from PVA glue, threads and balloon.
3. Glue the head to the base, add eyes and a beard from cotton pads.
4. Stick cups into each other and glue them as handles.
5. Glue a Santa Claus hat out of fleece or felt.
6. From the remaining cups, glue the gift bag and tie it with a ribbon.

Santa Claus from a plastic plate

The easiest exercise for preschool children is to make Santa Claus from an ordinary plastic plate. It is better for you to prepare all the necessary details in advance so that the baby can calmly create.

You will need:

• plate
• red triangle for hat
• white rectangle for cap lapel
• black circles for eyes
• cotton balls for beard
• nose pompon

Show your child how easy it is to glue all the pieces together and put Santa Claus together.

According to the same scheme, you can easily assemble a snowman and a deer!

Do-it-yourself chocolate bar with Santa Claus

IN Lately giving just chocolate bars has become unfashionable, everyone needs unusual packaging. A chocolate box is a postcard-box, inside of which there is a cherished sweetness, and maybe even a few lines with wishes are written.

1. Cut out the base for the future box from thick red cardboard and iron all the folds, glue the pocket for the chocolate
2. Glue ribbons to make your gift look more presentable.
3. On the front side, glue or paint on the face, beard, mustache, hat, nose and eyes
4. Put your favorite chocolate bar inside and write wishes for the New Year

Santa Claus from paper, do-it-yourself scheme

One of the easiest options for creating Santa Claus, and perhaps the most technologically advanced, is to simply print it on a printer and glue it according to the attached diagram. The most advanced can even print voluminous figurine on a 3D printer and then just color it in!

Do-it-yourself voluminous Santa Claus

You can fold a three-dimensional figure of Santa Claus using the technique modular origami which has become very popular in the last ten years.

The assembly of the product is carried out from the same modules, which allow you to create any shape.

For example, for Santa Claus, we need 493 identical modules (1 red for the nose, 275 white, 198 blue, 19 flesh). Each module is assembled from a rectangular piece of paper measuring 37 * 53 mm, or 1/32 sheet.

The module creation technique is as follows:

1. Having added the required number of modules of a certain color, you can go directly to the assembly
2. At the base of 25 BM (white modules) placed on the short side in a circle
3. In the second row, put 25 BM in the same way as in 1, but on the long side and put on 1 row.
4. The third row repeats the previous one
5. In the fourth row, put 25 cm (blue pieces) on the long side
6. Fifth row: 22 cm on the long side and 3 BM on the short side, turn the ring inside out
7. In the sixth row 4 BM and 21CM, all with the long side out
8. In the seventh row 5 BM and 20 SM, located as in the previous row
9. In the eighth row 6 BM and 19 SM, located as in the previous row
10. In the ninth row 7 BM and 18 SM, located as in the previous row
11. In the tenth row 8 BM and 17 SM, located as in the previous row
12. In the eleventh row 25 BM, located as in the previous row
13. In the twelfth row 25 BM, located as in the previous row
14. In the thirteenth row 1KM and 24 BM, located as in the previous row
15. In the fourteenth row, 2 BM with the long side outward over the KM 13 rows, on both sides of them, 2 TM (body modules) with the short side, the rest 19 BM
16. In the fifteenth row 7 TM and 18 BM with the long, short and long sides outward, respectively
17. In the sixteenth row, 8 TM and 17 BM with the long, short and long sides outward, respectively
18. In the seventeenth row, reduce the number of row elements by wearing 6 modules on 3 corners, a total of 22 BM outward with the short side
19. In the eighteenth row, 20 cm outward with the short side
20. 19th 18 cm short side out
21. In the twentieth 9 BM short side forward
22. Form handles from the remaining elements, glue the eyes and nose

DIY Santa Claus doll

In order for the child to remember this holiday for a long time, sew a puppet Santa Claus for him. Print all the patterns on the printer and cut out the details.

1. Lay out the fabric and circle all the details, leave a 5 mm allowance. Cut along the contour and sew on a typewriter.
2. Gather all the details together, use a thick thread to decorate the doll's clothes, the yarn will make a great beard.

Santa Claus on the Christmas tree with his own hands

On the New Year tree, among other toys, there must be Santa Claus and the Snow Maiden. They can be made from felt or cut out of colored paper to make an appliqué.

Also interesting idea- to make Santa Claus from beads, you only need a fishing line and glass beads of white and red colors. String the beads according to the pattern, and at the end make a loop out of the remnants of the fishing line.

Santa Claus from balloons

A very convenient and compact option for later storage is Santa Claus from balloons. You will need white and red balls for the coat and hat, pink for the face, and black for the shoes.

1. Inflate 31 red and 11 white balloons of the same size and place them in the shape of a cone, so that in the first row there are 6 white balloons, in the second and third 6 red balloons, in the fourth 4 red 1 white, in the fifth 5 red, in the sixth 5 red, in the seventh 5 red, in the eighth 4 white.
2. inflate big ball beige or Pink colour, this will be the head.
3. Put a Santa Claus hat on top of your head and draw eyes with a marker.
4. Make a beard out of white felt or fleece.

Santa Claus from salt dough

Another great material for creativity is salt dough. It allows you to create amazing gizmos that will last a lifetime.

1. First, prepare the dough: mix 200 grams of salt and flour, 100 ml of water and half a teaspoon of PVA and knead the dough
2. From ready dough mold the base into a cone shape
3. Fashion the sleeves and handles and glue to the cone
4. Of the two long strips dough, form the lapel and the hem of the fur coat
5. Shape hats and noses from small balls of dough.
6. Add a beard and mustache, eyebrows
7. Send to dry in the oven for 40 minutes
8. Then color ready product acrylic paints and varnish

Santa Claus made of wool

The felting technique allows you to create real masterpieces from ordinary wool. To felt Santa Claus, take flesh and white wool, felting needles, red felt for a fur coat, wire, beads and glue.

• From flesh-colored wool, knit a shape in the form of a cone, on which a ball is put on. The cone is the torso, so add a slight roundness on one side, this is the solid belly of Santa Claus.
• Cut out a fur coat for Santa Claus from felt and sew it right on the base.

• From the remnants of the red fabric, sew a small cone-shaped hat.
• Felted flagella from white wool so that they turn out to be fluffy on one side, put them on a sponge and use a needle to drive them into the sponge. Glue the finished flagella to the fur coat with glue along the hem and collar.
• From the remaining white wool we form a beard and mustache and attach them with a needle.
• Glue eyes and nose
• From the wire, measure the required length for the handles, wrap the wire with red felt and glue it on the ends of the mittens. Insert the open end of the wire into the body.

Making toys with your own hands is very interesting activity if you haven't tried it yet, now is the time to start. Don't be discouraged if something doesn't work the first time, you can always try again. Santa Claus will bring Christmas mood and the feeling of an approaching holiday in your home! New creative ideas Happy New Year to you too!

Video: Santa Claus do it yourself step by step

Let's see how you can create unique Christmas crafts. for a competition in school or kindergarten in the form of Santa Claus. I will also show you how to decorate gifts for the New Year with the symbol of Santa Claus. Let's start with gifts...

Santa Claus on a gift

How to do it yourself.

(simple options).

Here in the photo below we see a great New Year's decorations the most common gift wrappings made of gray wrapping paper.

For the first idea you will need:

• a round shape made of white cardboard, a piece of red cardboard,
• red pompom (or plain wadding + PVA glue + red gouache)
• a piece of white foam packaging (which is often put in boots in the store, or in boxes with appliances). Or (if you do not have such material) you can take white cardboard and glue it with cotton pads.)

On a white cardboard round eye shadow or blush draw spots on the cheeks, black beads-eyes with a marker. In a bowl, stir red gouache and PVA glue (a couple of drops of paint on a teaspoon of glue), dip a piece of cotton wool into this mixture. From this sticky red cotton we mold a ball with our hands - we dry it on a battery (it will dry overnight).

Cut out a triangle from red cardboard. We glue it on the edge of a white round (Santa Claus's forehead) - it is better to glue it dry, that is, use a glue stick or double-sided tape, since wet PVA glue will wet the cardboard and make it bend.

On top of the connecting line (between the cap and the head), we lay the “fur edging”, as I already said, it is better to cut it out of the foamed packaging material. Or glue the cardboard with cotton pads and cut out the edging of Santa Claus's hat from such “cotton-hairy paper”

And here two more ideas crafts-pendants in the form of Santa Claus - already from just cardboard ... and cardboard with paper molds for cupcakes.

Here are large packages with Santa Claus in large sizes.

You can even make a package yourself from a sheet gift paper. The template here is very simple. You can make such a drawing yourself with a pencil, cut it out, bend along the fold lines and it's ready. Beautiful box- glue the face and beard of Santa Claus to it and you're done.

You can do your own hands from cardboard (or from soft felt, or formiam as in the photo below) to make PACKAGING-POCKETS for gifts, decorated with Santa Claus appliqué on top.

Here is a diagram-drawing of such a pocket made of colored paper or cardboard. We bend along the lines, glue the sides and the container for sweets and chocolates is ready.

It remains only to glue the head of Santa Claus with a beard and a hat on top. Simple and fast, no complexity. You will enjoy making such quick pocket crafts with Santa Claus, a snowman, angels and other New Year's characters with your own hands.

Here is a soft felt or fleece pouch that is suitable for gifting a smart phone, or jewelry. It will be nice to receive such a gift, decorated manual labor and the imagination of the donor.

Santa Claus WITH CANDY
(just do it yourself).

Here's another new craft for this year. Santa Claus hides a candy in a bright wrapper in his tummy. A simple children's craft that you will quickly understand and can do with your own hands in one sitting.

As you can see (in the photo below), there is nothing complicated or tricky here. It’s just that Santa Claus’s tummy and back is a ONE PIECE - in shape it looks like a GAME EIGHT, which has a hole only in the upper turn of the number.

This "figure eight" is bent in half - and we get a tummy with a hole in the center in front and a closed back in the back. At the top we fix our halves with a drop of glue, or with a stapler or tape. And it remains for our Santa Claus to glue his head with a beard and legs-stand.

Santa Claus do it yourself

Craft in the technique of "spider line".

There is an article on our website where I show in great detail how to make such balls of glue threads and a small air balloon with my own hands. In this article, “Thread Balls and a Sea of ​​Crafts Using the Spider Web Technique,” ​​I posted a master class. Therefore, I will not explain in detail here, so as not to waste unnecessary words. Follow the link, it's all there.

And just look at the photo below and fall in love with these cute Christmas characters made from thread balls. Simple and fast. In one evening we make balls, in the second evening we glue them with colored paper parts - and a worthy craft is ready to go to the New Year's exhibition at a school or kindergarten.

You can not glue the balls with paper parts, but immediately put on such a cap on the top ball - where a face with a mustache and beard is already glued to the cone-cap.

In general, such caps made of cardboard (from the photo above) can be worn on ordinary white balloons. And you get a quick craft for the new year in the form of Santa Claus. Such quick crafts comfortable . (By the way, the link has a lot of quick craft ideas for decorating the New Year's office).

Santa Claus with his own hands.

balloon craft

in papier-mâché technique.

Here you can make such a pot-bellied nosy - sweet and charming Santa Claus from the cheapest materials. PVA glue + paper white napkins + balloon + gouache for coloring.

What is the secret of the SIMPLICITY of this Santa Claus craft.

The papier-mâché technique is very simple. If you mix a paper napkin with PVA glue - mold something from this mass and dry it, we will get a dense, almost wooden, hard craft.

This principle of creating a durable material from fragile paper and liquid glue became the basis of the Papier-mâché technique.

Instead of white paper napkins, you can use a regular NEWSPAPER. But then it will be necessary to paint it on top with white paint (acrylic or gouache) before drawing Santa Claus on it.

What do we do.

Step 1 Let's buy a balloon with an elongated tail (that is, pear-shaped). We inflate it so that it retains its slightly elongated pear shape. Turn the ball upside down and insert it inside the vase (to make it more convenient to work with). You can even fix it with tape a little to this vase - so that it does not jump out of it.

Step 2 We tear white napkins into shreds (or leave them whole, as you prefer). We smear part of the ball with PVA glue - we put it on this puddle white napkin. On top of the napkin, we again smear PVA glue with a wide brush and again put a napkin on this wet place. Thus, we glue the entire ball in several layers - generously pouring glue and generously laying layers of napkins. Leave it all to dry (overnight).

Note - you can glue the ball with newspaper, dry it and paint it in white paint. Or start the first layers from the newspaper. And the upper last layers should be made from a white napkin, then it will not be necessary to paint white.

Step 3 We crumple the napkins into large lumps - these will be the same. We also pour glue over it, also glue it with napkins, forming a wet papier-mâché crust. Let it dry too

Step 4 We take out the ball from the vase-pot on which it stood. Turn it upside down (this is empty place, which was in a vase, we will close it with a hat of Santa Claus, it will not be visible. With a marker on a dry round paper surface of the ball, draw the silhouette borders of all the elements of Santa Claus - a face with a nose, a beard, a fur coat. We decorate this round coloring with gouache. Don't forget to glue the legs

Note. For papier mache, you need a lot of PVA glue. If you buy it in the stationery department (where the glue is in small jars-tubes) you will overpay 5 times the cost. Better and cheaper to buy PVA glue in liter buckets in the construction departments of the store. For one liter of glue you will pay about 2 dollars. And such a bucket will be enough for you for a whole bunch of crafts. Any PVA glue with the inscription "universal" or "construction" is suitable for you. In composition, it is no different from the usual clerical PVA school glue. The manufacturer can be any. With this bucket, you will not only make Santa Claus out of papier-mâché, but also a snowman and a penguin (also based on a balloon). Details in other articles on this site.

By the way, on the basis of the BALLOON, you can make the most different crafts with Santa Claus. You can decorate a ball pasted with newspaper with stripes of colored fringe. We buy rolls of colored crepe paper in stationery. we cut it into strips, cut them into a fringe, glue the BALL IN A CIRCLE with fringe strips. It turns out another version of Santa Claus crafts with his own hands - mischievous and furry.

And you can decorate a balloon pasted over with a newspaper with a FLEECE WINDING - from soft material it will turn out very cozy and warm crafts.

We make our own Santa Claus

from stones and natural materials.

Ordinary stones - river small or large cobblestones can become the basis on which the New Year's fairy tale will sprout.

You can just find oval stable stones (or make them stable with plasticine). Cover the stones with white gouache (sprinkle with hairspray to fix the color and so that it does not stain your hands). Then, on a white background, draw all the lines of the future Santa Claus. Decorate with gouache each drawn sector. And then once again draw clear black boundaries between the elements of the picture - make the outlines with a black marker. Markers are great for drawing on stones. It is best to use a CD signing marker - it does not wash off and does not get your hands dirty.

On suitable flat pebbles, you can depict any New Year story. An article-lesson on creating beautiful New Year's drawings is already on our website "Family Bunch".

And from several stones (also painted with gouache) you can put together a whole plot application on a single background, cut out of plywood.

We buy a small sheet of plywood in a hardware store (or find a suitable one next to the entrance in a pile of garbage). Cut out a round piece. We tint with ink in the color of snow and the color of the sky. And against this background we lay out Santa Claus, his bag, his deer, his sleigh ... anything.

Please note that the stones perform only one part of the element - the rest are painted with paints, lined with twigs, ropes and other natural materials.

It is not necessary to choose smooth rounded pebbles. The most uneven curved stones can work to your advantage. Stack them, try them on to each other and try to see the outlines of your future crafts in this styling. Who knows what masterpiece your little "rock garden" will give birth to on a piece of paper.

Also, shells can be used as a natural material for crafts in the form of Santa Claus. It will turn out interesting and beautiful.

You can invent your own christmas pictures from magic stones. Do not forget to spray the craft with hairspray - this way it will become brighter and will not stain your hands with gouache, smear. Also, you can fashion some details of such a craft-panel from plasticine (it can also be covered with hairspray) ... or fashion from papier mache ( paper napkin mixed with PVA glue, see paragraph above in this article).

Craft Santa Claus

From plasticine.

From ordinary plasticine (or polymer clay) you can also make a beautiful Santa Claus. The main thing is to work slowly and remember to wash your hands when moving from one color of plasticine to another. There we will get the pure colors of the details and the whole craft will look neat.

After making the craft, you need to dry it in a cool place and sprinkle with hairspray. This is necessary so that it ceases to be sticky and does not collect room dust. Can be covered with acrylic matte varnish soft brush. Acrylic craft varnish is available at stationery or craft stores.

Such lacquered, non-sticky plasticine figures are also good because they can be used inside small Snow capsules. Where will the foam snowball go. Capsules for plasticine Santa Claus can be made with your own hands - from transparent plastic bottles. Cut off the top and bottom from them and docked them together. Pour glitter for nails, sequins or foam balls inside or cut fluff from pillows with scissors - the fluff will slowly settle creating the illusion of snowfall.

Can do flat crafts from plasticine. Roll out colored plasticine with a rolling pin on the table. A wooden rolling pin is not suitable - it leaves rough marks on the plasticine. As a smooth rolling pin, a glass round bottle or can of any deodorant is suitable.

We put a stencil image on the rolled out layer of plasticine (details of Santa Claus, or his clothes). Circle with a sharp object. Remove the stencil and cut with scissors along the scratched lines. We get planar details from which it is possible to fold a plasticine graphic application. Or make just such a craft to decorate the kitchen in the New Year's style (as in the photo below).

You can learn ideas for plasticine crafts in the form of Santa Claus from New Year's cakes decorated with mastic characters. Santa Claus is often molded from sweet confectionery mastic from different angles. Google New Year's cakes and you will find many ideas for plasticine New Year's heroes.

More New Years plasticine ideas for children's crafts in the classroom and at home, you can find in a special article on our website

Santa Claus do it yourself

FROM CONES.

Pine and spruce cones can also be painted with gouache (like the stones from the paragraph above). And in a painted form, the bump immediately becomes interesting basis for New Year's crafts in the form of Santa Claus. Paste beads - buttons a fluffy duster painted with white gouache becomes a lush beard. Cut out a hat from a piece of felt.

Also in the company of Santa Claus with your own hands (also from cones) you can make a deer (with fluffy wire horns), a snowman, a penguin in a felt scarf, and a green Christmas tree cone decorated with beads and flowers cut out of lace.

Other bright crafts-toys from pine and fir cones collected in a large article with photos

Volumetric Santa Claus

From modular origami.

If you know how to fold the Origami module. Then it doesn’t cost you anything to create such a pot-bellied Santa Claus. YouTube is full of videos that will teach you how to fold a triangular origami paper module in 2 minutes. For 2 pm make yourself a bunch of modules (family will help), and on the third evening fold Santa Claus. Assembly takes place without glue. Each module is nested into each other - like a groove in a groove.

green fir tree also consists of a modular origami. And you can make a snowman and a deer, if you think with your head ...

Santa Claus do it yourself

FROM PAPER CONES.

We all know how to make paper cones - like bags for seeds. We need a semicircle - which we roll into a bag and glue the side seam of the bag with glue (or not with glue, but with a stapler).

Or paper latches can be provided on the bag - cuts and ears that fit into each other. On the template below, we see that we have an incision on the left (short dotted line), and on the right is a protruding eyelet (along the edge of the hem of the fur coat). We cut out such a template (diagram below), color it and connect it into a bag - inserting the eyelet into the cut (or you can simply fix everything with glue without any ears).

Santa Claus is easy and quick to make based on a regular cone. Here below I give big schemes for large figurines. life size The scheme corresponds to the A3 format - it's like two landscape pages. Printing on the printer will not work - you need to go to the print center. But the craft will be large, pleasant in size.

Here's another one large template for Santa Claus crafts made of paper - it is also A3 format - print in the center of the printout.

But this template is smaller - if you want, you can also increase it to a large size. Each craft is beautiful - agree. So you can imagine how Grandfather Frost proudly stands on the windowsill and pleases the eye. Great craft- Elegant and simple.

Children's craft Santa Claus

From toilet paper rolls.

Cardboard rolls are great for kids crafts. Here in the photo below we see how you can beat the image of Santa Claus based on this “toilet-roll” form.

Elements can be made from paper, felt, cotton wool, formiam, fabric or knitted socks.

Santa Claus and dishes

(pots, cups, plates).

And in this section of the article I want to show how to do it yourself original craft from non-standard material.

From flower pots you can collect Santa Claus. We will make a beard for such a grandfather from gypsum plaster. You can buy at a hardware store gypsum plaster(it is cheap in small packaging for a pound you can take). We dilute the gypsum mixture with water to a thick porridge. And quickly, until it thickens and dries, we sculpt a beard to Santa Claus. Pots can also be coated with gypsum porridge, in those places where we depict fluffy fur or snow. If sprinkled on top sequins(with nail powder) it turns out that snowy places sparkle in the sun.

Or here are New Year's crafts from disposable colored cups. Here the cups are stacked in a circle on the floor (glue the round dance with hot glue from a gun). Then, on a round dance, we make the second tier-floor, then the third - they themselves will be rounded into a spherical shape (because the cups at the bottom are narrower than at the edge). We make one ball for the belly and one ball for the head of Santa Claus. From paper and fabric we make mittens, a belt, eyes, a mustache, a hat.

And we begin to make a green Christmas tree from cups according to the principle of a round dance. But inside it we put a cone of paper. And we still attach the cups along the upper floors to the walls of this paper cone.

From the remaining red cups and toilet paper sleeves, you can make cute Frosts with a cotton beard.

And disposable flat plates can be a source of such children's crafts. We put beige paper on the bottom of the plate (this will be the background of the face). Without a beige or pink background (just on a pale plate) it will be ugly.

Craft Santa Claus

From felt and formiam.

Now with the sale a new ornamental material has appeared - formiam. This brainchild of modern technology is very suitable for making voluminous puffy crafts that are well fastened together with hot glue. Here in the photo below you see Santa Claus crafts made from formim (porous thick material).

But crafts made of felt will still be more durable. And warmer to the touch. Kinder, closer.

You can make applications of Santa Claus on a round ball out of felt - you get a pendant toy for a Christmas tree.

Pay attention to how the appliqué details are fastened in the photo below - with rare stitches, details are stuck here (the beard and mustache are held on 4-5 stitches).

If you make a HOOP out of cardboard, wrap it with a cloth and decorate the front with a figure of Santa Claus, then we will get a headdress for the new year. It can be put on for a festive dinner for children, or worn right over a hat on the street - delighting passers-by with its New Year's look.

In addition to hard felt, you can use SOFT FLEECE. This is the material from which hoodies and hoodies are sewn. It is suitable for sewing soft toys in the form of Santa Claus or puffy pillows (as in the photo below).

But Santa Claus, where there are FELT (wool for felting) - in the left photo below. As well as a figure of Santa Claus made of a ball of red thread and a piece of white sentipon and a felt hat. The face can be made from a tennis ball tinted in beige.

Knitted Santa Claus.

And New Year's Santa Claus can be crocheted or knitted from threads. Below, for inspiration, I posted a few photo samples of such crafts with my own hands.

You can crochet just a flat figurine. Use it as an applique for a craft, or a toy pendant for a Christmas tree.

You can make a beard from cut bundles of threads (fluffy like a real one) Or simply tie it with a wedge (like a knitting process).

And here is an example of Santa Claus knitted on knitting needles with his own hands. Choose your favorite knitting method and start making a real surprise for the whole family with your own hands. Such christmas toy will accompany your holiday every year, like a tradition, like a family heirloom, made by mom's favorite hands.

These are ideas on the theme of Santa Claus with your own hands - from everything - from paper to knitting. Now you will definitely make yourself a magical Santa Claus who will fulfill your wishes this year. Because you deserve it. Because you are good.

Continuation of PAPER crafts in the form of Santa Claus - in our SECOND article

Olga Klishevskaya, especially for the site ""
If you like our site, you can support the enthusiasm of those who work for you.
Happy New Year to the author of this article, Olga Klishevskaya.

The closer New Year, the more often we think about decorating the house for this wonderful holiday. Santa Claus do-it-yourself crafts - new ideas with photos will help you create bright and interesting accents in your home.

Santa Claus FROM PAPER

Having made such a wonderful toy, you can hang it on a Christmas tree or decorate a room by making a garland.
What will be needed? Double-sided colored thick cardboard (or paper), wooden red beads (can be replaced with a tube), a bead, a needle and thread, a pompom and a thin ribbon, scissors, glue.
As you can see in the picture, the Santa Claus craft consists of two balls. To make a body with your own hands, you need to cut 6-8 strips 1.5 cm wide and 26 cm long. For the head, you should take 5 narrow strips 1 cm wide and 16 cm long.
To collect the ball, lay the strips in a circle - make sure that they divide it into equal parts. They should lie so that their ends intersect. To achieve this, we recommend using a template. Now we make out the bottom of the ball - we pierce the junction with a needle and thread, we fix the bead.

Next, we make the base, to which we firmly attach the free ends of the strips. In the original version in the photo, these are wooden red beads, but they can be replaced with a cocktail tube. The length of the beads should be half the length of the strip.
Having made two balls, cut out stencils of the face (1) and hands (4) from paper. We attach a pom-pom to the head. The figure shows two options for crafts Santa Claus - with legs (2) and without. Choose the one you like. An interesting addition there will be a gift bag made using the same technique. Top stencil under number 3.

FATHER FROST FROM A BOTTLE

New ideas with photos help to take a fresh look at already familiar things. From an unnecessary plastic bottle, we will get a cute Santa Claus. And not alone - a hare will keep him company.
What is needed for this? bottle, acrylic, paints, knitted scarf and bandage.
To make the figurine stable, fill the bottle. You can either not empty it before work, or fill it with cereals.

After the bottle has been cleaned of the sticker, rinsed and dried, coat it with a white acrylic primer. When it dries, start painting the bottle with colored acrylic.
So that Santa Claus, made by himself, does not freeze, it is worth putting a scarf and a “hat” on the painted bottle. If you make a hare, then the ears for it can also be cut out of an unnecessary plastic bottle.

Crafts Santa Claus FROM WOOL

In order to make crafts from cotton wool, you need a paste - 1 tbsp. mix a spoonful of starch with water until a creamy state, pour boiling water into the resulting mixture, stirring constantly. When the mixture becomes clear, it is ready to use.

Now we dip the cotton pads and cotton wool into the paste and form the details of the future figure - two cones from cotton pads (these are hands), cotton balls - one large and two smaller ones (these are the head, nose and pompom).
Prepare a small bottle - for example, from drinking yogurt. It will become the body of Santa Claus, so you also need to glue cotton wool on it.

The formed parts will dry during the day, then they are painted with gouache. After the paint dries, we attach the finished parts to the body, add the finishing touches - sleeves, collar, mustache, beard and everything else with PVA glue. The eyes are painted with gouache.
Additionally, make Santa Claus a staff and a bag with gifts.

FROM MACARON

That's it funny decoration New Year's table is done by hand. Of the materials you will need noodles, vermicelli and olives. And a flat surface on which the craft will settle down.

The cooking process is simple - boil the noodles and put them on the dish, creating New Year's image. If you do not find colored noodles, we advise you to color the usual one.

FROM PALM

How do you like such a new idea as in the photo? You can literally make crafts with your own hands.
What is the manufacture of such Santa Claus, who will become interesting decoration postcards, you need: red and white cloth, postcard with the image of Santa Claus.

As you understand, everything is simple - you just need to circle your hand and cut out the resulting outline from the fabric. Next, we add the main figure from the pieces New Year's Grandfather and attach the head cut from the picture on top.

FROM A BULB

To make such a decoration, you need to paint the light bulb with white paint in two layers.
While the paint dries, start modeling from mastic (salt dough is also suitable) a round flattened ball - this is the nose of the figure. And sew a hat so that Santa Claus is not so cold.
If the paint is dry, then it's time to glue the finished nose into the area of ​​\u200b\u200bthe future face. We advise you to do this with the help of a “hot gun”.

Now we begin to draw with a simple pencil the contours of the face, eyes, eyebrows, mustache and beard. Now you can paint over the rest of the body with red paint.
Now let's start painting the face - do not forget to add glitter to the eyes. To make the painted parts look voluminous, we recommend drawing them with a contour.
Now we put on a hat (to keep it securely, fix it with a hot gun). Sew a thread to the hat so that the toy can be hung on the Christmas tree.
Additionally, it is worth using a thin brush with black paint to draw the details of the toy. And don't forget the glitter!

FROM THE SOCK

An amazing craft, real Santa Claus can be made from ordinary socks!
First, let's take a white sock - this is the body of the toy. Cut off the unnecessary, leaving only the length that is convenient for you.
If in the end you get, for example, a cropped top, then carefully sew or tie the bottom - so that you get a "pouch". If you bandage, then turn the sock inside out, so the toy will become stable.

The blank should be filled with cereals or cotton wool. We fix the top with an elastic band. Father Frost's fur coat is made of another red sock. Usually the lower part of the sock is used, in which case the part that used to wrap around the fingers will become a hat, and the rest will become a fur coat. Mittens are made from parts of the bootleg.
With the help of cotton wool, the crafts are decorated - they make a pompom, a beard, the edges of clothes. With our own hands we make a bag and a staff. Don't forget the eyes and nose! They are made with beads or buttons.

We hope the photos from this article gave you new ideas for creating crafts for the New Year, which is just around the corner. We wish you good luck!

Click Class

Tell VK

Who main character New Year? I think it's Santa Claus. This old man pleases us with gifts and magic. What else can we expect from this holiday? Well, since we have already made Christmas trees, glued, sewn, then Morozko must be done.

Moreover, there are also many ideas for this. We will select options for every taste and for any material. After all, what is the most important thing in this craft? That's right, red cap and white beard. And that's all, a guest from Veliky Ustyug jumps to our holiday. Well, for those who are closer to Santa Claus, there are also ideas.

In general, it's time for us to create and be inspired!

To begin with, let's see what creative personalities tried to make Grandfather. What fell into their hands at the first moment of creative thought. And for some reason I wanted to start the article with large interior and voluminous crafts.

Santa Claus from cups

Inspired by these Frosts. All are made according to the same technique, but how different they are, you just wonder!

The combination of red and white cups immediately evokes the idea of ​​who it is. Look at what beards are made of: cotton, cotton pads, paper, yarn.

And this Grandfather even has a beard made of cups.

So how do you make them? Let's look at the diagram. We draw a blank on paper with a diameter of your choice. We will immediately lay out the equator of our ball. The larger the diameter, the larger the ball will be!

Then lay out the cups along the line. We fasten them with a stapler and make the second, third row, removing 1-2 pieces from each layer to make a circle.

Or here is an option where you need only one glass.

For the body, they used a sleeve from toilet paper or from paper towels.

From sweets

Next, we have simple crafts-presents with sweets and lollipops. Remember, we considered, and so there are also ideas with Frost and sweets. I will not repeat. Actually, I only found one. I am attaching it.

I was amused by the idea of ​​wood. It turns out that in order to create, it is enough just to take desired colors paints.

From cones

Once started about natural materials, then here are ideas for you from cones.

If there are a lot of cones, then you can make such a big Frost. But, of course, this craft is not for one day.

Another interesting option is napkins. From a distance, they also resemble cones.

Maybe someone likes to felt wool? Then here is a craft for you for an example with step-by-step actions.

Based on this drawing.

We start with the body.

On it we make a pattern of red fabric, leaving room for the head.

We twist it and sew it. We put on a body made of wool.

Tie the bottom edges with a thread.

We make a hat, fur and beard.

Gypsum or salt dough

Now it is fashionable to do crafts from plaster. But for those who have children under five years old, it is better to make salty dough.

And you need to make an imprint of a splayed palm, look.

Making a handprint. Dry the material.

We mark the picture.

And we will implement it in paints.

We thread the rope through the hole and hang it on the Christmas tree.

I share with you my discovery of ice cream sticks.

From threads

Have you met the technique of pulling the thread through the carnations? So, who is interested, you can create such frosts.

And with the help of a cone base and yarn, a very simple, but interesting craft.

• felt,
• thermal gun,
• yarn,
• paper cone,
• decor.

First, let's start with such a muzzle made of felt.

We cut out the necessary parts and glue them with hot glue.

Now we need to make a paper cone and wrap it with threads to make it look like this. Make sure there are no gaps.

The edges must be well fixed with glue.

Putting the craft together and do not forget about the handles.

From disposable plates

Yes, this improvised material is definitely lying around in the kitchen for many. Great idea crafts with kids.

In this master class, you will need only part of the plate. She will act as a sleigh.

Let's now take a step-by-step look at how frost is made.

Take a plate and cut off 1/4 of its part. Inside, where the flat and smooth part is painted with beige.

We take a triangle of red paper and glue a plate on it. It remains only to form the eyes, mustache and pompoms.

See what a cool beard Grandfather can get from disposable spoons.

And even eyebrows can be made from them.

Of course, there is an idea from plasticine. Everything is shown in detail in the photo instructions.

If suddenly you have a sheet of foam at home, then here's what can come of it.

lying around plastic bottle for water, dress her up too.

Well, and another cool option with one plastic spoon, cotton pad and yarn.

We take a spoon, cut off a stalk from it. We wrap the edge with thread. And smear the convex side with glue. Roll up the cotton pad. And stick it on the spoon. It remains only to add the missing elements.

How to make crafts from nylon tights, a master class in the video

Eat cool idea creation of dolls in hosiery technique. Unfortunately, I am not a master in this, so I give a master class in video format.

And here I will give an idea from a sock

You can make a body without handles. The main thing is that it is sustainable.

Well, do balls often come to your house? After all, they also make wonderful Santa Clauses.

This is far from all. We can say that we are only at the very beginning of the journey!

Patterns for Santa Claus from fabric (tilde)

Now I will give a lot of patterns. There are ideas in the Tilda technique, but there are just patterns for soft toys.

Scheme 3.

For inspiration!

Scheme 10.

Scheme 11.

Scheme 14.

If you do not save or download the scheme, then take a screenshot of the screen and edit the picture in Painte. This graphic editor is installed on all operating systems.

Knitted Morozko and patterns

Now options for crafts for those craftswomen who knit. I liked such non-standard Frosts. And it’s okay that none of them is in a red hat, you can’t confuse them with anyone anyway.

This collection shows how to tie such beauties.

Of course there is a blueprint.

The idea is the same, but here the crochet pattern is different.

You can also make a volumetric Santa.

Or just cross stitch it.

We'll talk more about embroidery below. There will be enough diagrams.

Video how to make Grandfather from cotton wool

In our childhood, Santa Claus and the Snow Maiden were made from cotton wool. If you missed those times, then here's a master class for you. It is presented in video format to discard all possible questions, because the craft is complicated.

Of course, here you need to practice a little, but it's not so easy.

Simple paper crafts

Of course, we will now make paper and cardboard. Without it, just nowhere. This is the most accessible material for us. Especially if the crafts are made by children.

In addition to such Frost, you can decorate windows. For example, according to this stencil.

Cones make a lot of different ideas. In the photo below you will see detailed master class how to create such funny Frosts. This cone pattern can be used for any other crafts.

Well, here's another great cardboard and paper idea. The main thing is what kind of beard it turns out to be gorgeous with 0 rings!

And these grandfathers can even be hung on a Christmas tree. I really liked the bow mustache idea.

Here are some more cone blanks.

On their basis, such crafts are obtained.

Or you can simplify the task. And make the base yourself. The main thing is to fasten the edges of the cone well so that they do not turn around.

Another fun craft and a master class for it.

Now over complex idea. This Frost is made from two paper balls.

Such balls are made according to this scheme. By the way, you can do it at the same time.

For those familiar with the quilling technique, here are some ideas.

From corrugated paper and sweets, you can make an individual gift for each participant of the holiday.

Laughed at this piece. What a funny Santa.

The hat folded with an accordion is simply incomparable. Both volume and relief are created immediately.

Another craft with a curly beard.

From cardboard you can create such an interesting Frost.

Idea for little kids! Use stencils of your hands for crafts.

Such a craft can be made from pieces of paper or plasticine balls.

Hello Santa from Peppa Pig!

Our parents make and craft everything. And we thank them and take them into service!

Now I will give several stencils for gift boxes with elements of Santa Claus.

And I almost forgot to show you these suspensions.

You can also make them as a postcard.

We make from cotton pads for kindergarten children

Of course, it is very easy to make crafts from cotton pads. For example, like this Frost. You just need to prepare the materials in advance. To make enough for every kid. and they are in kindergarten groups, usually about 30.

Idea for home art.

Paper and cotton pads are very easy to glue with PVA glue. Moreover, it is the most safe view glue. It can be used for creativity even the smallest children.

This option was in the first section, but I decided to remind you.

The beard of Santa Claus can be very useful at various matinees.

Put on a red cap and a red T-shirt and the young Santa Claus is ready. Or Santa Claus.

Santa Claus with his own hands from felt

Certainly, ! They don't make anything out of it! And be sure to have a lot of patterns and patterns. Let's start, perhaps!

Here is your first master class. This is a Christmas toy. You can, of course, play with it anyway, but it's too unstable.

Pattern for Santa Claus.

These crafts simply surprise with their solidity and presentability.

There may be several patterns for them. For example, this one.

It also turns out such Morozushko.

For the cap, take this diagram.

The next pattern of suspensions.

Now detailed instructions how to sew such a boot for gifts.

A very unusual idea. You can use not only felt, but also fabric.

Another template for inspiration.

You can make a lot of wreaths. They are suitable as decoration for any room.

This Frost will not leave anyone indifferent. It can also be used as a pendant, because there is a hole in the hat that is convenient for this.

For decoration, you can do several new year characters: Christmas tree, star, christmas ball, deer, etc.

Fantasy is limitless. Therefore, on the basis of one pattern, you can create many new ones.

In this craft, bells were attracted. How festive they ring!

You can also make voluminous and flat figures. I bring patterns of those and others.

This Frost is very similar to the New Year's gnome, but does not lose its relevance and charm at all!

In general, only your imagination matters. And we will provide you with the schemes!

How do you like this craft using bushings?

There is nothing complicated here and you don’t even need to sew anything.

How to quickly and easily make Santa Claus from a bottle

So the bottles are different. Someone decorates the beauty with champagne. And someone creates from a plastic vessel for water.

Of course, if it comes to children, then we will take a closer look at the ideas. Here, for example, stand for stationery or small toys.

Or just an interesting craft for decoration.

Santas can be the packaging for a child's sweet gift.

For inspiration, here are some more options for the oldies.

Cotton buds come in handy too!

I think that the child can choose for himself what idea he wants to bring to life.

Santa Claus for the New Year from origami

Origami is popular with students. It's hard for little kids. We somehow tried to make a dog with a child, he understands everything, but it’s a bit impossible to repeat. Therefore, this section is for those who are older.

There will be several master classes. All with step by step description work.

Scheme with arms and legs.

Are you familiar with the modular origami technique? There, at first, many blanks of the same form are made. and already crafts are formed from them.

The following step by step scheme.

Another option.

Detailed step by step photos won't get confused.

How do you like this option?

And it's Santa Clauses already gone.

Well, another variation.

In general, care is important here.

Ideas for New Year's cards

Finally, let's see the ideas of postcards with our character. It can be flat, three-dimensional, monochrome or colorful. Small or big. It depends on you! The main mood in which you created it!

Use different techniques and unusual shapes.

Combine different materials: pompoms, buttons, paper and cardboard, wood and wire.

As well as a few drawings to create a postcard. you can just print them and give them by signing the wishes on reverse side. They can also be used as window decorations.

But the most simple idea postcards that you can create with your child.

For inspiration, you can look at the crafts and just take their outline.

The card itself can be different forms, it can unfold, shrink or simply open.

Or it can be in the form of an envelope.

As you can see, there are no restrictions anywhere, it is just important to think over the composition, prepare materials and start creating! I wish you health and every success.

tweet

Tell VK