How to clean a mink coat yourself at home? How to gently clean a mink coat yourself

Beautiful outerwear can not only protect from the cold, but also raise the mood and self-esteem of any woman, especially if it is made of noble fur eg mink.

Such products are not cheap, but the cost is fully justified by lightness, noble brilliance and comfort when worn.

To maintain decent appearance mink coat must be regularly cleaned of dirt that appears during wear. For this, it is not at all necessary to go to a dry cleaner. Knowing a few tricks, you can easily clean a mink coat yourself.

Regardless of the type of fur, there are several rules that must be followed when cleaning the product yourself:

The fur product must be laid out on a flat surface covered with a light-colored cloth.
Lighting in the room should be as close to natural as possible. It is better to perform the cleaning process during the day.
Using chemical substances you need to take care of good ventilation, but drafts are best avoided.
Before use chemicals(even at first glance sparing) you need to apply them in an inconspicuous place on the wrong side of the product.
Dry the coat natural fur after cleaning it is necessary in a well-ventilated area or in the open air in the shade. Direct sunlight, hot air and drafts should be avoided.
A fur coat with a short pile is cleaned against the growth of hairs, with a long pile - in the direction of growth.

If after cleaning the fur coat has lost its shape, you do not need to try to iron it. Even if the iron does not damage the hairs, they will shrink and natural fur will lose its attractiveness.

Features of cleaning mink fur products

Even short fur coat not all women can afford. This fur is one of the most expensive, largely due to its characteristics:

light weight of the finished product;
softness, pleasant to the touch pile;
noble shades from black to snow-white;
good heat resistance.

This fur is very delicate, in order to avoid damage it is prohibited:

use any washing powder and other non-specialized detergents;
wash in the usual way (by hand or in a washing machine) the fur coat completely or in separate places;
strongly rub and scratch the pile;
neutralize unpleasant odors using perfumes, deodorants and other means;
dry the cleaned fur coat on the battery, near an open fire or using a hair dryer;
iron to return shape;
remove dust with a vacuum cleaner.

When is it time to clean?

reduction or disappearance of the characteristic luster;
uneven shade;
pile settling;
plaque of dust and grease on the hairs;
matted fur, knots of hairs;
small debris in the mezdra (lower layer of hairs);
the appearance of spots on the coat.

Methods and means for cleaning a mink coat

You can return a mink coat to its original appearance different ways. Which one depends on several factors:

type and cause of pollution;
color and dressing of fur;
location of pollution.

Before you start cleaning a mink coat, you need to remove dust and debris from it. To do this, just hang it on a coat hanger, wrap the product in a wet cloth (preferably white) and knock it out a little.

After such manipulations, you need to dry the fur coat in the air and only then proceed to cleaning.

It's not uncommon to bring back a mink coat decent view or slightly refresh, steaming is enough:

hang the product on a coat hanger;
steam from a special steamer;
let air dry;
shake and comb.

Please note that an iron with a “steam” function will not work for these purposes, since there is a chance of burning the hairs a little.

You can also steam clean your fur coat in the bathroom:

turn on hot water, close the door:
when the bath is filled with steam, hang a fur coat there and leave for 30-50 minutes.

Detergents to help

You can remove dirt from the mink with the help of special products for cleaning fur products:

"Insaf" - removes most contaminants, protects against moths and creates an imperceptible film on the villi that repels dust. The antistatic action of the agent prevents the pile from falling off.
"ULTRA FINISH MILK" - a product that restores shine and silkiness to the fur.
"FUR FRESH SALAMANDER Professional" - a spray that restores shade.

When using these products, you must follow the manufacturer's recommendations to prevent damage to the fur.

Specialized products do an excellent job with most pollution, but they are not cheap and are not on sale in all outlets.

Instead, you can use a liquid detergent, such as neutral shampoo or colorless dishwashing liquid:

add a tablespoon to 2 liters of warm water detergent;
beat the liquid until foam appears;
put foam on fur soft sponge or cloth, rub a little;
comb with a plastic comb with non-sharp teeth.

The mink coat treated in this way should be hung on a coat hanger and dried.

Cleaning folk remedies

Many lovers of natural fur prefer folk remedies for cleaning mink coats:

Alcohol solution. To prepare it, medical alcohol or ordinary vodka is mixed with warm water in equal proportions. Distribute the resulting composition evenly over the fur (with a sponge or from a spray bottle). Gently lift the pile with a soft brush or sponge and gently comb (repeat the manipulations several times). Allow the cleaned fur coat to dry, shake well and comb against the pile with a soft brush.
Instead of ordinary alcohol, ammonia can be used (the amount of water must be doubled). The method of application is similar to the previous one. This tool is rarely used due to specific smell and the risk of damaging the core.
Table vinegar will help not only clean light dirt and neutralize odors, but also have a conditioning effect. How to use: in a convenient container, mix vinegar, warm water and alcohol in equal amounts. Moisten the sponge with the resulting liquid and wipe the dirt. Immediately after this, blot the pile with a clean, dry cloth and take the fur coat to a well-ventilated area so that the smell of vinegar disappears.
Gasoline is used only for cleaning dark mink coats. To remove dirt, the sponge is moistened with gasoline high degree cleaning and gently wipe the pile. To remove a specific smell, the fur coat should be taken out to a ventilated room.

Benefits of folk remedies:

affordable price;
ease of use;
fur safety, environment and human health.

Mechanical cleaning methods

You can also clean the fur coat using dry methods, without the risk of deformation of the delicate mink fur. The principle of their action is the mechanical removal of contaminants.

Dry cleaning options:

Bran (rye or wheat) will absorb fat and dust from mink fur. To do this, the product is heated in a pan or oven and evenly distributed over the fur coat. After the bran has cooled, they must be removed and the pile carefully combed.
As an absorbent, talc, flour or starch can be used. Spread the powder over the fur coat, rub a little and peel off. If the removed powder is dark in color, the procedure should be repeated. These products are suitable for restoring freshness to light-colored mink coats.
Sand (better to use river). natural mineral sift, heat in the oven until warm and distribute over the fur coat. After cooling fur product shake and comb thoroughly.
Sawdust from non-coniferous trees (sold in pet supply stores). Mix a small portion of sawdust with gasoline and spread over the surface of the fur coat. After a few minutes, clean with a brush and hang in a ventilated place.

How to remove stains: dirt, grease and others

Even careful wearing of a mink fur coat will not protect against the appearance of various stains. It could be:

dirt;
cosmetical tools.;
Oil paint;
fuel oil

Getting rid of them is more difficult than ordinary dust, but with timely action it is quite possible even at home.

The way to remove a stain from a mink coat depends on its origin.

Light dirt, such as street dirt, is removed with a soap, vinegar or alcohol solution.

On mink coats of light shades, yellow spots sometimes appear from time to time or ultraviolet light. You can refresh a slightly yellowed fur coat with a 3% solution of hydrogen peroxide (5 ml of the product per glass of warm water). The resulting liquid is irrigated with a fur coat, combed and allowed to dry naturally.

To remove individual yellow spots, they are treated with a more concentrated solution (30 ml of hydrogen peroxide per glass of warm water) with the addition of a few drops ammonia. The resulting product is rubbed into the pile with a sponge and left to dry. Please note that contact with such a mixture on the base may damage it.

To combat yellow spots, you can use professional bleaches ("LOVESTIN", "VITON-FS"), strictly following the instructions.

Grease stains and traces of sweat can be removed with a solution consisting of a glass of water, 3 ml of ammonia, tsp. salt and a few drops of colorless detergent. The mixture is applied to the stain, gently rubbed and after 10-15 minutes removed with a clean, dry cloth.

Getting rid of odors

Mink fur, like any other, absorbs odors. You can remove them in several ways:

treat with special sprays that remove odor from the fur (for example, Odorgon);
hang in a cool room with good air circulation;
treat with a solution of vinegar;
place in a tight case with a handful of coffee beans, a sachet with lavender for 2-3 days.

How to clean the collar, sleeves, pockets and lining

Sleeves, collar and pockets are the most contaminated outerwear. Even with careful wear, they begin to shine from natural secretions body, cosmetics. You can remove such contaminants with soap, vinegar, alcohol or gasoline. In this case, you need to focus on the color of the fur coat.

The lining of a mink coat gets dirty no less than fur. You can clean the fabric in 2 ways:

Treat the lining with soapy water using a brush, dry with a dry cloth or paper towels. You need to act very carefully so that water does not get on the skin and the mezra.
Rip off the lining and wash it. This method is less risky, but more time consuming. It is difficult to carry out such a procedure on your own, it is better to entrust it to specialists from the atelier.

A small life hack that will make it easier to take care of the lining: sew fabric on the bottom of the sleeves, collar and bottom of the fur coat in the same color as the lining. If necessary, it is torn off, erased or replaced with a new one.

Let's summarize a little:

For home cleaning of fur coats of light shades (white, silver, blue mink) use the most gentle means: soap, alcohol, vinegar, hydrogen peroxide, starch or talc.
fur coats dark shades(brown black) can be cleaned with gasoline, sand, all solutions except bleach. White powders (talc, starch) can be difficult to completely remove from the pile.

When is dry cleaning essential?

The service of dry cleaning a mink coat is not cheap, but in some cases you cannot do without it:

home methods were ineffective;
old stains are found on the product.

Please note that a mink coat can withstand no more than 6 professional cleanings.

Fur products made from such delicate fur as mink require careful handling, so when choosing dry cleaning, pay attention to reviews so as not to be left with a damaged item.

Basic rules for caring for mink products

Manufacturers guarantee that a mink coat will not lose its attractiveness for 10-12 years, if you follow the simple rules of wearing and care:

wear a fur coat only on dry winter days;
keep away from sunlight;
when wet, shake, hang on a coat hanger and let dry on its own;
do not wear a bag on your shoulder to avoid abrasion of the pile;
store in a closet on wide (preferably soft) hangers;
periodically comb with a soft brush;
for a warm period, clean in a tight cover. In its absence, free up as much space as possible so that the fur coat does not come into contact with other things;
let the mink coat breathe every 2 months, hanging it in a dark place with good ventilation;
to preserve the noble shine of the fur, rub a mixture of linen, mink or olive oil with vinegar (proportion 2:1), pre-supporting the lining;
before storing a fur coat, you should clean it yourself or dry-clean it.

Careful care, careful wearing and timely removal of dirt can extend the life of a mink coat for several years.

Before proceeding directly to the cleaning process, you should remember some points that are unacceptable when working with fur products.

Wash in the usual way;
Subject to local washing;
Use products that are not suitable for processing fur.

The mink coat should be dried only in a well-ventilated area. In no case should it be placed above an open fire or radiator.

Before you start cleaning a mink coat at home, you need to familiarize yourself with some restrictions:

Do not clean it if it has only one or a few stains;
Do not use cleaning powder or conditioner that is not specifically designed for fur;
It is strictly forbidden to dry a thing over a fire or a heater, it is also impossible to dry it on a radiator. It is recommended to dry the product in a room at room temperature, which is well ventilated;
Never use an iron;
Don't clean your coat light shade starch.

Cleaning a mink coat, in order to avoid damage to an expensive mink product, should be carried out using the right specific methods.

it is impossible to wash the fur product, this will lead to a loss of the appearance of the fur, and the skin may become rough and dry;
after any wet cleanings do not dry the fur with a hairdryer, use heaters or a fan for this. When things get wet (rain, snow), it will be quite enough to hang it on a hanger or coat hanger and leave it like that until it dries;
the use of an iron is also excluded. It will not be possible to achieve straightening creases or bruising in the wrong storage process. Here it would also be appropriate to hang it on a hanger or coat hanger and through certain time she will straighten up, and will have original view. We also recommend reading our article on how to smooth fur on a fur coat, read here.

When caring for a fur coat at home, the fur product cannot be washed in the usual way;
Do not dry over an open fire, next to or on a radiator, radiator and heater, under direct sunlight;
You can not iron a fur coat, not inside, not outside. If necessary, you can iron the lining by unfastening the material from the clothes;
It is impossible to ventilate a fur coat in a room with a draft;
Do not store fur products folded or folded;
Do not store in a plastic case, otherwise mold may form on the product.

If the fur product has been exposed to rain or snow, the wet surface is soaked with dry paper napkins or towels. Keep the fur coat only hanging on wide coat hangers in a dark room, preferably in a spacious closet with tightly closed doors. You can use a fabric or other special cover for outer fur clothes, but not made of polyethylene.

Air your clothes regularly in a cool, but draft-free room. Try to remove oil and grease stains immediately. If the product is dusty, lay the fur coat on a damp white sheet with the pile down and knock it out.

Let the clothes dry and comb out the villi with a comb or a special brush. Subject to the rules of storage and care, fur clothing will last a long time. For more information on how to properly wear and care for a mink coat, read the link https://vsepodomu.ru/garderob/kak-uhazhivat-za-norkovoj-shuboj/.

Often it is the lining, on which all traces of sweat and fat remain, that requires more thorough cleaning than the pile of a fur product.

To qualitatively clean the material, without affecting the fur and leather base, you can only unfasten it or tear it off. The lining can be washed manually or using an automatic washing machine, selecting the mode according to the type of material. For silk and other fabrics requiring delicate care, requires a mode with a temperature of up to 40 degrees.

If the owners of mink coats do not dare to tear off the lining, fearing difficulties with stitching it back to its original place, then cleaning it without removing it from the fur base is acceptable. To do this, you will need a soapy solution, a soft brush, a highly absorbent rag and dry paper napkins. Liquid soap dissolve in warm water and gently remove dirt with a soft brush, trying not to touch the leather base and its reverse side. The excess of the used liquid on the fur product and the foam are eliminated with a damp, clean rag. Dry the surface with paper towels.

Prolonging the life of mink items helps to follow the rules of care and cleaning.

By implementing proper care behind a mink product, you can ensure its service up to 12 years. Too often, the mink does not need to be cleaned, this must be done as it gets dirty. The time when you need to clean a mink coat can be determined by external signs:

A layer of dust;
bruising;
The hairs stick together, causing the fur to lose its splendor;
Fur fading;
Hair impurities.

Dry cleaning of mink products

In order not to damage the surface and not injure the base of the product wet products, which can lead to creases after drying, shrinkage of the leather base, alternative dry cleaning products should be selected. Gentle ways to care for fur items include the use of improvised household products.

Dry cleaning a mink coat is the easiest and most gentle method for fur. For this method, products such as talc or starch are well suited, which are best used to cope with dirt on a white mink coat.

In order to carry out dry cleaning, you must first shake the item from dust, spread a sheet and lay the product on it. Then you need to rub the selected cleaning agent into the pile and after a while remove it by shaking the thing well.

Another good cleaner is sawdust. You can buy these sawdust at any pet store.

To clean them, you need to mix them in a suitable bowl with clean gasoline and place a fur coat in it. After such a “wash” it is necessary to clean it of sawdust and let it dry.

Dirt cleaning

You can clean a mink coat from dirt with ordinary semolina, as it perfectly absorbs any dirt. The surface of the thing must be sprinkled with semolina, and then gently combed with a brush with frequent teeth in the direction of the growth of the villi. In order to completely get rid of the remnants of all dirt and semolina after cleaning, shake the fur coat well.
If available fresh footprints dirt, then before you start cleaning, you need to let them dry. And only after that, with the help of regular brush for cleaning proceed to remove the dirt. After such a “combing out”, the fur coat must be shaken well several times.
Regular talc will help get rid of dirt. To do this, pour the product onto the pile, and rub the talcum powder with your hands. After cleaning, the residues are easily removed from the surface of the fur coat after thorough shaking.

Methods for wet cleaning of fur things

Fur can be cleaned at home or dry-cleaned. At home, you can get rid of various contaminants, including old ones. Cleaning in dry cleaning, on the one hand, is the most effective, but on the other hand, it is much more expensive.

But if various cleaning methods were tried at home and the pollution could not be removed, then it will not be possible to do without the help of professionals.

Wet

Wet cleaning is carried out using various liquid substances. Before proceeding with it, you need to find out which means are best suited for what purposes so as not to spoil the product.

Means	Action
Ammonia	Suitable for product whitening and elimination yellow streaks. Fights odors and greasy stains.
Liquid soap or washing gel	Removes impurities
Hydrogen peroxide	Whitens the product, removes yellowness
Vinegar	cleans up bad smell and cleanses of impurities
Shampoo	Effectively fights fresh stains
Petrol	Effectively removes dirt, but not suitable for cleaning light fur
Ammonia mixed with dry salt	Removes yellow spots

Chemical

TO dry cleaning they resort when it was not possible to eliminate pollution at home.

The product is placed in a special chemical solution that can eliminate almost any contamination without spoiling the appearance. But, there is one big disadvantage of this method of cleaning: the fur loses its strength and, consequently, the service life of the fur coat decreases. According to some experts, mink fur can withstand no more than 6 such cleanings.

Cleaning by chemical means quite expensive and not everyone can afford it. Undoubtedly, there are pluses, you can be sure that your item will not be damaged and will be returned to you in the best possible way.

When cleaning a fur coat, it is important to remember that any careless action will lead to damage to clothing. You can’t wash a fur coat, it will sit down and decrease in size. A mink coat can be cleaned in two ways: wet and dry. In this case, the means that are always available in the house are used.

Wet cleaning a mink coat is a more effective way to remove deep stains. Before cleaning, the mink coat is placed on the shoulders in vertical position. After cleaning, the fur coat must be combed with a special brush and allowed to dry.

Such a delicate and expensive thing as a mink coat requires special handling. In order for a thing to last longer, it is necessary to follow certain rules during its operation.

Ill-considered actions while cleaning a mink coat at home can lead to damage to an expensive item. Therefore, you need to remember about those actions that are categorically unacceptable when handling the product.

It is impossible to wash a mink coat at home, this can lead to coarsening and dryness of the leather base, the fur may fade.
When carrying out wet cleaning of a fur coat at home, it is not worth speeding up the drying process with a hair dryer, fan, radiator or other means. A fur coat damp from rain or snow can be dried without damaging the fur with a leather base by hanging it on a hanger in a dry room away from direct sunlight and heating objects.
Taking out a fur coat to wear in the winter, you can find ugly creases on it. To get rid of them, just hang it on a proportional shoulder. After a while, the skin will stretch under the weight of the product, all the creases will straighten out. It is unacceptable to use an iron to straighten the surface, it will not be able to cope with creases, but it injures the fur and the base.
It is highly undesirable to spray the fur coat and its lining. toilet water or spirits. Odors can mix and form unpleasant odor. It will be quite difficult to get rid of it; table vinegar and hydrogen peroxide are used for this.
For fur products, fat-based cosmetics are detrimental: foundation, lipstick, and others.
It is desirable to store fur products in a special dark-colored rag case that does not let through sunlight, so you can prevent the product from yellowing.
At long-term storage it is recommended to ventilate the fur product periodically, it is permissible to use moth repellents.

The use of some means will allow you to wet clean mink things if they have stains and severe dirt. However, they must be used with care so as not to damage the product.

Of the many ways to clean mink fur, we note some of the most effective. But, we must not forget that cleaning should be careful and very accurate, since this fur is quite capricious and negligence can then be costly. The following methods can be used to clean blue and light mink.

Dry brushing

Not deep dust pollution is quite possible to remove mechanically, i.e. carefully comb out the product with a brush.

This method will allow you to remove not only dust and get rid of dirt, but also from various villi of fallen wool, remove the resulting lumps, and also smooth out the pile.

Alcohol or vodka

Also, simple surface contamination can be removed by moistening a piece of gauze cloth in alcohol or vodka and gently wiping the fur coat in the direction of the villi. This method also helps to rid the pile of fat well.

To clean the fur from grease, lipstick, coffee and juice stains, as well as to give it shine, a vinegar solution will help.

Having moistened a swab with them, you need to wipe the fur coat along the pile and let it dry on a hanger. After that, you need to wipe the product with cotton soaked in glycerin and hang the thing to ventilate, for example, on the balcony. IN final stage comb out.

Not complex, fresh dirt can be removed with shampoo or washing gel. The key point is to use a moisturizing hair shampoo, which will prevent excessive drying of the leather base. Cleaning a mink coat in this way occurs in three stages:

dilute a little shampoo or gel in warm water until foam forms;
this solution is applied with a sponge to the desired area of \u200b\u200bthe fur coat and wiped until the contamination is removed;
the foam is washed off with clean water, the fur is wetted with a dry cloth, and the product is hung up to dry.

The Internet is replete with many proposed methods for cleaning mink fur that are completely unacceptable, which not only will not help the fur coat to get the desired look, but, most likely, will do even more harm.

After such methods, most likely the product will be suitable for wearing in the country. Such wet cleaning and dry cleaning methods include:

cleaning with sawdust, which must be rubbed into the fur;
the use of starch, which can and will remain in the villi of the fur, which will subsequently attract insects;
cleaning coats with gasoline. This method will not only give a long-term persistent specific smell to the fur coat, but can also spoil the structure and color of the fur;
ammonia;
sprinkling delicate fur with hot sand, which then can not be completely removed from the product;
semolina groats.

Wet cleaning

The wet cleaning method differs from the dry cleaning method in that different liquids are used in the process. In order to know how to clean mink fur at home, you need to understand what tools can be used for this.

A solution of ordinary table vinegar used against greasy spots. How to clean mink fur with this tool? Simply and easily! It is necessary to prepare a vinegar solution of not more than 5% and ordinary cotton wool or a cotton pad.

So, for example, to clean the collar from stains, you just need to soak a cotton pad with a solution and gently process without pressing Right place. The fur surface can be cleaned of fat and using an ordinary spray gun. You just need to fill it with vinegar and spray it on the contaminated area, and then let the product dry. Then the coating is removed with a special brush for fur care.

Ammonia or medical alcohol

To combat pollution, you can use the following solution: for 1 liter of boiling water, in which you can first add about 10 g. soap, ammonia or ordinary medical alcohol is added, only 10 drops. After the solution is ready, it is necessary to cool it to room temperature and apply to the entire fur coat with a brush. After the procedure, it is necessary to allow the product to dry well.

In order to give the mink fresh look it is necessary to prepare a solution and pour sawdust with alcohol. It is necessary to sprinkle the fur coat with processed sawdust, after spreading it on the floor or on any flat surface. After the sawdust has dried, they must be carefully removed from the surface with any soft brush, and then allowed to dry.

Shampoo

Can be used to remove dirt regular shampoo for hair. It is best to choose a moisturizer so that it does not dry out the surface of the fur coat. Shampoo diluted with warm water and mixes well until foam appears, and the resulting soapy solution is used for cleaning. Using a sponge, the foam is applied to the place of contamination and easily rubbed until the dirt or stain is removed. The soapy solution that remains can be removed with a clean cloth dipped in plain water, without shampoo.

Hydrogen peroxide

For cleaning, it is permissible to use ordinary hydrogen peroxide. To do this, prepare a solution and go through the fur with a cotton pad soaked in it. All the dirt that is on the product will be collected by the disk, and the fur will look shiny. If there is no cotton pad, you can use a brush dipped in the solution.

How to clean a mink coat from vomit

If it so happened that the fur coat got dirty in vomit, there is no need to despair, you can clean the fur coat in three stages:

Clean the stain by hand or with a dry brush. Then sprinkle with starch and grind thoroughly.
After removing the starch, clean the stain with soapy water.
Dry the fur coat, remove the remnants of starch and soap particles with a clean cloth. Comb the coat.

The hem of a long fur coat is a very vulnerable place, as there is always a risk of getting it dirty, for example, getting into a car. To remove stains from the hem, in addition to gasoline, alcohol and ammonia, you can use the following methods:

Rinse potato peels, twist through a meat grinder, add a few drops of ammonia. Apply the resulting slurry to the fur, and wipe with a brush.
Boil rye or wheat bran. Distribute the resulting mass over the stain even layer, rub thoroughly. Repeat if necessary.

Looks white fur very chic, but the attitude towards it should be careful and delicate. Any pollution immediately becomes noticeable on a white fur coat, so it has to be cleaned more often than a dark one. In addition, white fur can turn yellow over time, which is why the appearance of a fur coat immediately becomes dull. There are some simple but effective ways cleaning white fur:

Sawdust is mixed with gasoline or alcohol. The mass is applied to the fur, thoroughly rubbed, and then removed. The fur coat needs to be combed and aired.
Bulk materials: semolina, starch, talc, tooth powder, flour. One of these means rub the fur. The degree of purity is visible by the color of the product.
Hydrogen peroxide is poured into a spray bottle, then it is sprayed over the surface of the fur. Also, hydrogen peroxide is mixed with one of the bulk products and a uniform gruel is obtained, which is used to clean a fur coat.

Mink products that are white in color look so great, but, unfortunately, after a while they may lose their beautiful appearance. White fur on such products may turn yellow over time, and then the hostess wonders how to clean a white mink coat and get rid of yellowness?

Yellowed fur can be cleaned with semolina, starch or even chalk. All of these products are great for removing stains. It is enough to apply them on the surface of the fur and then rub it well into the pile.

Most the best remedy to get rid of yellowness on fur, this is hydrogen peroxide, as it is a natural clarifier. To prepare a cleaning agent, you need to mix hydrogen peroxide and a few drops of ammonia. Then, using cotton pads, apply the solution to the fur coat and let it dry, preferably in the fresh air.

Hydrogen peroxide

From the yellowness formed over time, you can clean the mink fur at home with hydrogen peroxide. It is done like this:

one to one peroxide is mixed with water;
the resulting mixture must be poured into a spray bottle;
from a spray bottle, spray the contents onto the fur (it is not worth splashing white fur too much);
let the coat dry naturally;
after drying, cleaning is completed by combing the pile.

Blue

clean up white coat blue will help from yellowness. This method is quite old and somewhat extreme, it must be used very carefully.

Blue for linen is diluted in water to a slightly bluish color. The resulting liquid is poured into a spray bottle and evenly applied to the yellowed areas of the fur. Let the thing dry without washing off the blue. Finally, the fur needs to be combed.

Ammonia and salt

Yellowed fur can be returned to natural color diluting in warm water (250 ml) a tablespoon of ordinary salt and half a teaspoon of ammonia. Moisten the gauze cloth with the resulting mixture and clean the fur coat with it.

The use of talc will help not only to clean a light fur coat from yellowness, it perfectly absorbs greasy stains and fights various odors. The algorithm of actions is as follows:

it is better to spread a fur coat on a flat and clean surface;
sprinkle the desired areas with talc in moderation;
smooth the talc on the fur with your hands;
after five minutes (this will be enough to absorb and get rid of the smell), shake off the talc and comb the fur coat to get rid of the remnants of the mineral.

How to get rid of dusty, unpleasant odors and restore freshness to fur

Unfortunately, having lost its luster, a mink product also loses its presentable appearance. In addition to cleaning from dirt, it is sometimes necessary to carry out procedures that will return the coat to its original shine. You can refresh a fur coat by wiping the fur with the following means:

Chopped walnut kernels;
Glycerol;
Vinegar;
Petrol;
Starch;
Hydrogen peroxide (for light fur coats).

After treatment with one of these substances, comb and dry the pile.

Fur is able to absorb and retain many flavors for a long time. Imagine that your fur coat absorbs the smells of food, perfume, cigarettes, public transport every day. When these smells are mixed, an unpleasant persistent composition is obtained. You can get rid of bad odors in the following ways:

Regularly clean the product from dirt and dust.
In winter, take the fur coat to the balcony and leave it in the cold for a couple of days. All unpleasant odors will freeze out. If it is not possible to freeze the product on the street, then it is neatly folded and placed in the freezer.
In summer, dry the fur coat several times in a cool, dry place without exposure to sunlight. Store the fur coat hanging on wide coat hangers so that it does not come into contact with other items of clothing. Instead of a polyethylene cover, a fabric one is used. Arrange coffee bean bags in pockets. But remember that coffee masks odors, not removes them, so the fur coat must be perfectly clean!
Remove odors vinegar, gasoline, alcohol, ammonia.
They absorb all the smells of starch, semolina, flour.

Cleaning blue mink fur

Blue mink coats are not cheap, and it is quite difficult to care for them. Fur over time blue color loses its beautiful appearance and in order to rid your favorite fur coat of yellowness, you need to know how to clean a blue mink.

You can clean blue mink fur using ammonia or rubbing alcohol. To do this, mix both solutions in proportions 1: 1 and add 2 tbsp. l. water. After that, moisten a cotton pad in it and wring it out a little, and then gently wipe the stain. After the end of the procedure, it is necessary to beat the fur a little and let the product dry well in the fresh air.

How to clean a white mink coat and get rid of yellowness

If, over time, the fur on the fur coat began to absorb foreign odors, then, unfortunately, it will not be so easy to get rid of them. First of all, you need to purchase a specialty spray for fur. It helps to remove the smell and also cope with some pollution. Also, to eliminate the smell, you can use orange juice, mixing it with water in a one-to-one ratio, as well as a bag of lavender. Ground coffee will help to remove foreign odors well, which must be placed in a closed bag and put in a fur coat.

Ammonia and salt

Lining cleaning

We figured out how to clean mink fur, but what to do with the lining, because it also needs cleaning? The lining needs to be washed, for this it is carefully torn off. Next, the fabric is washed and the mode that suits this material is selected. After washing, the lining is ironed and sewn back. If you are not sure that you can sew everything back on properly, then you can try to clean the inner fabric without ripping it off.

the lining fabric is gently moistened with a sponge dipped in soapy water;
remove excess moisture with a dry cloth and hang the product on a coat hanger to dry.

Like a fur coat, the lining also gets dirty and needs to be cleaned. The first option is to clean the lining along with the fur coat, and then dry it thoroughly.

The second option is to tear off the lining, wash it in warm soapy water by hand or in a washing machine on a delicate cycle, remove existing stains with ammonia. The lining is dried naturally, ironed and sewn into place with neat, inconspicuous seams. When worn, the lining can be easily replaced in the atelier or on your own if you have sewing skills.

Putting away a fur coat after winter for storage, evaluate general state contamination of fur, individual places (collar, cuffs), including lining. Often the lining requires more frequent care than the pile of a fur product.

It is possible to clean the lining qualitatively, without affecting the fur and the leather base, only by unfastening it or rebuffing it. The lining is washed by hand or in an automatic washing machine, carefully choosing the washing mode. For silk and other fabrics that require delicate care, a washing mode with a temperature of up to 40 degrees is suitable.

Owners of mink products sometimes hesitate to tear off the lining, fearing that they will not be able to re-sew it with high quality. In this case, it is permissible to clean the gasket without removing it from the base. To do this, you will need a soap solution, a brush with soft bristles, a rag and dry paper napkins. Soapy solution, without touching the leather base and its reverse side, the dirt is gently brushed off with a brush. Remove excess soap with a damp, clean cloth and possible foam. Residual moisture is removed with dry paper towels.

In wet weather, it usually gets wet first. Bottom part fur coats. Protect the product from heavy pollution the lower part of the lining can be sewn on a safety fragment. From a fabric that is suitable in color and structure, a piece is cut out from 20 cm to half a meter in length. The fragment is sewn on top of the lining and, at the first contamination, it is torn off, washed and sewn to the same place.

To clean the lining, you need to spread the fur coat on a flat and comfortable surface. It is necessary to wash the lining with a special sponge, which was previously moistened with soapy water. After that, it is necessary to wipe the lining with a clean, not very wet cloth, and then with a regular cloth so that it absorbs the remaining water. After this procedure, it is best to let the fur coat dry in a room at room temperature.

For easier cleaning, the lining can be torn off and washed. This method allows you not to expose the entire fur coat to cleaning, but to remove dirt directly from the lining itself.

For a thorough cleaning of the lining of a fur coat, it is best to unpick it. This must be done very carefully with a tool designed for this, in order to prevent damage to the skin.

After the lining is separated, it is easiest to wash it with the obligatory observance desired mode washing.

After this procedure, the lining should be rinsed well so that there are no streaks left, ironed and sewn back.

If separating the lining from the fur coat is not an acceptable option, you can try to bring it to the right kind right on the coat.

This method also requires caution, as there is a risk of wetting the core.

It is necessary to prepare a soap solution and gently wipe the cloth with a sponge, rub it with a brush and then remove the remaining solution with another damp washcloth.

For faster drying, you can blot the lining with a cloth and hang the fur coat on a hanger or coat hanger and dry at room temperature.

If only the lower lining is heavily soiled, for example, in slush, there is an option to sew another piece of fabric onto the factory lining, which will cover the main lining and subsequently this particular piece can be easily torn off and washed.

Facilities

Owners of mink coats often face such a problem as lipstick stains or foundation on your favorite fur product. Alcohol or ordinary vodka easily copes with such pollution.

a clean cloth or cotton swab is wetted in the liquid;
fur is wiped in the direction of the pile;
as soon as the cloth or tampon becomes dirty, they must be rinsed, moistened again in liquid and continue cleaning the fur;
repeat the procedure until the fur is completely clean.

If the pollution is very ingrained, you can additionally add a spoonful of vinegar and a spoonful of water to a spoonful of alcohol. Wipe the fur with a solution, wait until it dries and clean everything with a brush.

It is best to use talc for white mink fur, because it perfectly absorbs greasy and yellow impurities. With the help of this bulk substance, you can also deal with unpleasant odors that the fur has been saturated with.

for ease of cleaning, the fur product is spread on a flat surface;
sprinkle with a small amount of talc on top;
smooth the fur with their hands so that it gets under the villi;
wait literally 5 minutes for the talcum powder to absorb the dirt;
shake off the product and gently comb to get rid of the remnants of excess material.

Some advise replacing talc with another bulk solids, for example, flour or starch, but this is absolutely impossible to do. The thing is that talc is a mineral, while other proposed products are not, so it is easily combed out and spilled out of the product. Starch or flour can get stuck between the fibers and cause an unpleasant smell, and they can also swell and attract insects. The use of these substances can permanently ruin a mink product.

Shampoo

Shampoo is used to remove fresh and light dirt, since the pile is a bit like hair, it can be washed gently. The only, very important thing is to use a good moisturizing shampoo so that it does not dry out the skin.

A small amount of shampoo is diluted in a bowl of warm water.
Whisk until foam forms.
To clean with shampoo, you will need another bowl, but with clean water and a rag.
Using a sponge, a soap solution is applied to products or only to a contaminated area.
Wipe the necessary places until any contamination disappears.
The shampoo solution is washed off with clean water.
With a dry, clean cloth, the pile gets wet.
The product is hung out to dry.

If there is no time to wait for natural drying, then you can use a hairdryer. Cold air dries the necessary places or the entire product. Using a hair dryer, you can gently lay the villi and give them a well-groomed look. If you are afraid to dry the fur in this way, then you can use a special comb and comb it out. Before you start cleaning the mink with shampoo, previously contaminated areas are wiped with alcohol if necessary.

Sawdust

Cleaning with sawdust is quite popular, besides, they are used to clean the fur in production.

It is necessary to purchase non-resinous sawdust, the easiest way to do this is at a pet store.
Sawdust is mixed with alcohol.
The product is laid out on a clean surface and sprinkled with sawdust soaked in alcohol on top.
Already dirty sawdust is removed from the fur with a brush.

Cleaning in this way allows you to remove even difficult dirt and rid the product of an unpleasant, persistent odor, such as the smell of vomiting.

To restore the whiteness of the product, it is cleaned with semolina. To do this, it is boiled with milk to a thick slurry and applied to the fur. In this form, leave for 12 hours. Over time, the remnants of porridge are brushed off. After cleaning with semolina, the mink fur becomes white and shiny. With the help of such cleaning, you can return not only the whiteness to the original color of the product, but also remove grease stains from the pile.

When people purchase a fur product, it is understood that it will be worn for more than one year. Therefore, it is advisable to buy professional tools fur care. Products from the manufacturer "BIOFUR" are very popular.

Fur products never lose their relevance. Look fashionable and chic in your favorite mink coat will help careful attitude and regular maintenance.

Special industrial tools can help to properly care for a fur coat, such as:

FUR FRECH SALAMANDER Professional. Aerosol for tinting fur if necessary. It is necessary to add it to the water, process the fur coat and hang the product on a coat hanger.
LIVAL LICKER CONZ. This spray cares not only for fur, but also for leather products.
INSAF. A tool that helps produce preventive care behind the product. It helps a lot if you do not know what to do with a jammed pile. It also acts as an antistatic agent and helps protect the coat from moths.

Specialized fur cleaning products can now be found in almost any department store.

They are usually presented in the form of sprayers, which are convenient to use when applied to mink fur.

Such funds are simply sprayed onto the pile and absorbed in a matter of minutes, after which the fur coat is combed out.

As a rule, these funds consist of a certain amount essential oils and fats of animal origin.

After their application, the fur coat returns to its original appearance and shine. Among these funds, the following can be recommended:

Insaf. The most popular fur cleaner; Prevents the formation of tangles and matting of the undercoat. Well eliminates greasy;
"Lival licker conz". The comprehensive action of this spray allows you to improve the color of the fur coat, makes the fur soft. There is a coloring effect;
Fur Fresh Salamander. Tints fur, restores shine and eliminates clumps of stray fur;
"Ultra finish milk". Cleans fur products of any color, adds shine, prevents pile from sticking.

Proper Care

In order for a thing to last a long time, oddly enough, it must be worn. The fur coat must be ventilated, put on in very coldy and try to avoid heavy pollution.

Any stain that appears should be removed immediately so that it does not soak into the pile. After cleaning, it is impossible to dry the fur product near heaters or batteries, only in a ventilated room.

In order for your fur coat to always look spectacular and be cleaned as little as possible, we suggest you use a few useful tips:

Fur products have the property of strong absorption of odors. Therefore, it should be borne in mind that if you often change the perfume, the aromas will settle on the surface of the product. Getting rid of this smell will be quite problematic for you.
Try to wear a light-colored fur coat so that such fatty products like lipstick or foundation.
Fur clothes for summer period must be placed in a special light-tight case.
Light product is best stored in a case of blue color, to prevent the appearance of yellowness.
In the summer, a mink coat must be ventilated in the fresh air.
Moth protection should also be provided. Try to avoid aerosol products, as they can cause fur contamination. Better - use special tablets.

In order for the mink coat to serve for a long time you need to take care of it properly.

First of all, it is worth mentioning proper storage products. It should be stored in a special bag or case to prevent moths from eating it.
When cleaning a fur coat, use only suitable means and follow all recommendations.
Do not dry a fur coat near a radiator or other heating devices, as it may deteriorate.
It is best to store the fur product in a suspended state, since when stored lying down, bedsores may appear on its surface.

Only proper care of things and their proper storage will help to preserve their beautiful appearance for a long time.

You can also remove a stain from tea, coffee or juice with a soapy solution and a soft brush. A lipstick stain or foundation can be removed with a thick cloth soaked in medical alcohol.
After any method you use, dry and air the cleaned item for only outdoors, far away from heating elements and draft. Do not under any circumstances iron!
Fur products after a long rest need a "walk". After removing the fur from storage, shake it, hang it on a coat hanger and hang it outdoors for about an hour or two. Then comb the product - it will shine and refresh.
If you want to give your favorite scent to a hat or coat, in no case spray perfume on the fur. Apply perfume to a special brush and comb the coat - the fragrance will last long and bright.

Mink fur has always been the most status, expensive and fashionable. After all, it is not only beautiful, but also relatively wear-resistant - with careful and careful wear and proper care, it can last you ten to twelve years. That is why graceful mink coat or posh mink coat was, and still is, the dream of many women. And, if your dream is already on your shoulders, then with a little work, you can prolong the life and beauty of this wonderful soft fur.

Advantages and disadvantages of dry cleaning

Before wondering how to clean a mink coat at home, many people prefer to seek dry cleaning services. And this is quite normal, since special institutions have the following advantages:

It is possible to choose various methods cleansing;
Saves personal time;
Reduces the risk of spoiling a fur coat;
All odors and pollution are eliminated;
A special tool is used for cleaning.

But among the advantages, some disadvantages of dry cleaning can be noted. Firstly, you should give your fur coat only to reliable hands and trusted companies. Secondly, you can give a mink coat for dry cleaning only 4-6 times, since in the future it most likely will not survive this procedure.

Wondering how to clean a mink coat at home? Right now you will learn how to do it quickly, efficiently and, most importantly, without harming the fur.

Do you need cleaning

First of all, you need to decide if your fur coat needs cleaning. Of course, if you get it dirty in transport or splashes from under the wheels of a car get on the fur, the need to eliminate pollution is obvious.

If you are thinking about how to clean the fur from accumulated dust and possible greasy, we recommend that you use a regular hair dryer.

Direct a stream of air at a fur coat at a distance of at least 40-50 centimeters. If the fur hairs scatter easily and freely and form a small open area in the center of the airflow, which disappears as soon as you remove the hair dryer, and the hairs fall back to their original place, then we can conclude that your product does not need cleaning.

In this case, it is better not to injure him and simply send him to storage.

If, under the air flow, the hairs remain motionless or stray into bundles, your fur coat really needs a properly selected cleaning.

Dry cleaning

First of all, it should be noted that there are two types of mink fur cleaning:

dry;
wet.

If you want to learn how to clean a mink coat at home, the dry cleaning video will show you the correct sequence of steps in detail.

In order to remove dirt from a fur coat, you only need a fur care brush with short metal bristles. First, the product must be thoroughly dried without the use of artificial heat sources.

It is enough just to hang a fur coat on a coat hanger that is suitable in size in a room with room temperature. When the soiled area is dry, brush over it in the direction of hair growth several times, then shake the product.

The brush will remove dry dirt, and the cleaned fur will shine again.

Manka

The method of cleaning mink products with the help of semolina has proven itself perfectly. It is suitable if the product was worn long time and in general lost its original appearance, became dusty and lost its luster.

This is especially noticeable on the sleeves, in the area of the collar and pockets. Lay the fur coat on a flat surface and sprinkle the places of contamination with semolina.

Light movements that mimic the process hand wash, treat the necessary areas for 30-45 seconds.

Semolina will act as an excellent abrasive, which will quickly remove dirt from the fur. Finally, shake the product and go over it with a special brush, which we wrote about above.

Some people recommend using starch instead of semolina. If after the described manipulations the starch became darker, then the fur was really dirty and the cleaning procedure should be repeated once or several times until the starch remains snow-white.

Wet cleaning

Wet cleaning means more aggressive impact on fur using a variety of liquid formulations.

One of the popular methods of cleaning mink fur is combing with a brush dipped in gasoline. It should be noted that such manipulation is not recommended for very light fur, otherwise it will turn yellow.

The brush should be worked lightly, without pressing and without trying to completely wet the fur. It is very important to comply necessary equipment safety, work indoors with open windows and away from sources of fire.

Peroxide

How to clean a mink coat at home from yellowness? There are several ways. The most effective are the use of hydrogen peroxide or vinegar.

Take a regular cotton pad and a bottle of 5% hydrogen peroxide. Using a disk soaked in the solution, process the fur in the direction of hair growth.

You will see traces of dirt on the disk, and you will also notice how the cleaned fur will again shine and become snow-white. At the same time, do not forget to change cotton pads.

Vinegar

How to clean a mink coat at home with vinegar? Very simple. cook vinegar solution(max. 5%) and proceed in accordance with the recommendations applicable for cleaning with hydrogen peroxide.

The most important thing is not to overdo it and not wet the base of the fur. Treat the product without pressure, wring out the cotton pad after soaking in the solution.

You can spray the starch solution onto the fur surface with a spray bottle and let it dry. After that, remove the coating with a special brush for the care of fur products.

If the mink coat has lost its luster, creases or various impurities have appeared, then it's time to clean it. Next, you will learn how to dry and wet cleaning, what products can be used. Separately, instructions for cleaning a white mink coat are given.

Dry cleaning mink coat

The most gentle is, of course, dry cleaning. With it, ordinary dirt is removed, for example, if a machine has sprayed or the product has become dusty. To do this, you need to purchase a special brush for fur products with frequent, short and metal teeth.

Dirt cleaning

A fur coat splashed with mud is dried at room temperature, hanging on a coat hanger. As soon as the fur is completely dry, it is gently combed in the direction of hair growth several times. Now it remains to shake off the product well - there will be no trace of dirt, and the fur will shine again.

Cleaning to combat the effects of prolonged wear

Talc or semolina will help to cope with glossy fur and fur that has lost volume.

Semolina helps to get rid of greasy stains, as it is a good absorbent. Talc will not only help remove grease, but will get rid of odor and dust, but it is not used for dark fur, as it can leave white marks on them.

The same tools will return the former shine:

The fur coat is straightened on a straight surface, the contaminated places are sprinkled with either talc or dry semolina.
With light movements for 30 seconds, rub the components into the fur.
Then shake off and go through with a special brush, removing the remnants.

How to clean a mink coat from stains?

For more stubborn stains, use wet cleaning. But only the hairs of the fur are gently moistened, trying to prevent moisture from getting on the base. For wet cleaning use:

soap solution

The solution is prepared from a non-aggressive agent. It is better to use hair shampoo, which is mixed with warm clean water and whipped until foam is formed. It is applied with a sponge or soft cloth to the fur in a circular motion. Then the soapy solution is removed with a damp cloth and the fur coat is allowed to dry in vivo. It remains to walk along the pile with a brush, and the updated fur coat is ready to wear.

Petrol

Gasoline is used to tidy up fur coats only from dark pile. On light-colored fur, he leaves yellow spots. When working with combustible material, observe safety precautions - carry out work with an open window and away from the source of fire.

Cleaning can be done in two ways:

The brush is moistened in gasoline and the fur coat is combed gently without strong pressure on the fur.
They buy sawdust from non-resinous trees (linden, oak, maple), soak them in water, adding a little clean gasoline. The fur coat is straightened on a flat surface and sawdust soaked in a gasoline solution is laid out on it.

Regardless of the method, the final step is combing the fur with a brush and airing the fur coat for several hours in the fresh air.

Vinegar

The vinegar solution helps bring back the shine to the fur. Vinegar is diluted with water (the concentration of the solution should not exceed 5%), a cotton pad is taken, moistened, squeezed out of excess moisture and wiped with a pile. Long fur is processed according to hair growth, short - against.

In this case, the main thing is not to overdo it and not to wet the base, otherwise damage cannot be avoided.

How to clean a white mink coat

A white mink coat is a luxurious and easily soiled product. If the fur coat is dirty, then you can try to clean it at home.

Dry brushing with talc or tooth powder

The fur product is laid out on a flat surface and completely sprinkled with the chosen agent - talc or powder. Leave for a few hours, then shake off and brush if necessary.

Cleaning with a solution of hydrogen peroxide or ammonia

They help restore shine to fur and attractive appearance product, refresh it:

For 1 liter of water, take 1 tablespoon of peroxide and clean the fur coat with this solution. The algorithm of actions is the same as when cleaning with vinegar. If yellowness appears on the pile, then the concentration of the solution is increased.
Prepare the following solution - add 1 tablespoon of ammonia and 3 tablespoons of salt to 1?2 liters of water. Wet a cloth in this solution and wipe the fur with it. After that, let the fur coat dry and comb the pile with a brush.

How to clean a mink coat from vomiting?

Vomit is a hard-to-remove contamination. Therefore, it is better to entrust the cleaning to a professional. No opportunity? We clean the fur coat at home on our own, in 3 stages:

Fresh stains fall asleep potato starch and rub it into the pile in a circular motion.
Then a solution is prepared - washing powder is dissolved in water. Using a spray gun, apply it to areas with starch and around it.
Carefully remove everything with a sponge and dry the fur coat. When it dries, the remaining starch is carefully combed out with a brush.

When preparing the solution, carefully consider the choice of powder. So, if the coat dark color, the powder must not contain bleach.

Precautionary measures

To avoid unpleasant consequences after cleaning the fur coat, you should remember the following rules:

Under no circumstances should the coat be washed. This will lead to irreversible deformation of the fur product.
Drying a fur coat near heating devices (batteries, heaters, open flames) adversely affects it.

If the fur coat gets wet from precipitation, it is hung on a hanger and dried at room temperature in the room.

An iron is categorically contraindicated for fur. With it, you can not get rid of creases on clothes without negative consequences.
You can not store a fur coat folded. If this happened, the fur coat should be unfolded, hung on a coat hanger and allowed to hang.

Video: Cleaning a fur coat with purchased products

Available for sale special means for cleaning fur, for example, Bio Fur. IN next video you will see how to use this tool:

So, there are several ways to refresh a mink coat and rid it of pollution. Before each cleaning, be sure to test the new product on an inconspicuous area of \u200b\u200bthe clothing to avoid damage to the entire product and unpleasant consequences.

On the onset of cold winter period warm clothes begin to get out of the wardrobe and put in order.

One of these everyday winter things is a mink coat. To provide long life this product, it must be properly stored and, of course, cleaned.

The frequency of cleaning depends on factors such as: frequency of wear, climate, weather and the human factor.

Fur coats tend to collect dust and other contaminants that may not be visible to the naked eye.

If the soiling of the item is not particularly serious, you can do without dry cleaning. This article will tell you how to clean a mink coat at home without resorting to expensive means.

Cleaning a mink coat, in order to avoid damage to an expensive mink product, should be carried out using the right specific methods.

it is impossible to wash the fur product, this will lead to a loss of the appearance of the fur, and the skin may become rough and dry;
after any wet cleanings, you can not dry the fur with a hairdryer, use heaters or a fan for this. When things get wet (rain, snow), it will be quite enough to hang it on a hanger or coat hanger and leave it like that until it dries;
the use of an iron is also excluded. With it, it will not be possible to achieve or wrinkle in the wrong storage process. Here it would also be appropriate to hang it on a hanger or coat hanger and after a certain time it will straighten up and will have its original appearance. We also recommend reading our article on how to smooth fur on a fur coat,.

Ways to clean a mink coat at home

Alcohol or vodka

Vinegar

To clean the fur from grease, lipstick, coffee and juice stains, as well as to give it shine, a vinegar solution will help.

Shampoo or washing gel

dilute a little shampoo or gel in warm water until foam forms;
this solution is applied with a sponge to the desired area of \u200b\u200bthe fur coat and wiped until the contamination is removed;
the foam is washed off with clean water, the fur is wetted with a dry cloth, and the product is hung up to dry.

How to clean a white mink coat and get rid of yellowness

Hydrogen peroxide

From the yellowness formed over time, you can clean the mink fur at home with hydrogen peroxide. It is done like this:

one to one peroxide is mixed with water;
the resulting mixture must be poured into a spray bottle;
from a spray bottle, spray the contents onto the fur (it is not worth splashing white fur too much);
let the coat dry naturally;
after drying, cleaning is completed by combing the pile.